Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

Evaluating the Machinability of Inconel 718 Using Polar Diagrams

Avdovic, Pajazit LU ; Xu, Linhong LU ; Andersson, Mats LU and Ståhl, Jan-Eric LU (2011) In Journal of Engineering for Gas Turbines and Power 133(July). p.113-133
Abstract
Abstract in Undetermined
The use of a polar diagram method for describing and evaluating the machinability of
Inconel 718 was explored. Five key parameters of the work material, representing the
mechanical and physical properties, which have the strongest influence on its machinability,
were employed in the diagrams. These five parameters were integrated into a
single polar diagram, used to describe the machinability of Inconel 718. Variations in the
machinability of Inconel 718 products or components of a given type produced in different
batches were analyzed. Industrial experiments were conducted to test the relationship
between the polar diagram of the work material, its carbon content, and the tool wear... (More)
Abstract in Undetermined
The use of a polar diagram method for describing and evaluating the machinability of
Inconel 718 was explored. Five key parameters of the work material, representing the
mechanical and physical properties, which have the strongest influence on its machinability,
were employed in the diagrams. These five parameters were integrated into a
single polar diagram, used to describe the machinability of Inconel 718. Variations in the
machinability of Inconel 718 products or components of a given type produced in different
batches were analyzed. Industrial experiments were conducted to test the relationship
between the polar diagram of the work material, its carbon content, and the tool wear of
the ceramic cutting tools used in machining it. Work materials of Inconel 718 in which
the polar diagrams of machinability were similar in size and shape exhibited very similar
behavior during the cutting process. The polar diagram method employed appeared to be
useful for selecting suitable cutting data for the machining of new materials. (Less)
Please use this url to cite or link to this publication:
author
; ; and
organization
publishing date
type
Contribution to journal
publication status
published
subject
keywords
polar diagram, machinability, Inconel 718
in
Journal of Engineering for Gas Turbines and Power
volume
133
issue
July
pages
113 - 133
publisher
American Society Of Mechanical Engineers (ASME)
external identifiers
  • scopus:79953239984
  • wos:000288807900012
ISSN
1528-8919
DOI
10.1115/1.4002679
language
English
LU publication?
yes
id
74dde98d-bae0-44b3-b485-05e7a785e90c (old id 2298186)
date added to LUP
2016-04-01 10:12:27
date last changed
2022-01-25 20:53:52
@article{74dde98d-bae0-44b3-b485-05e7a785e90c,
  abstract     = {{Abstract in Undetermined<br/>The use of a polar diagram method for describing and evaluating the machinability of<br/>Inconel 718 was explored. Five key parameters of the work material, representing the<br/>mechanical and physical properties, which have the strongest influence on its machinability,<br/>were employed in the diagrams. These five parameters were integrated into a<br/>single polar diagram, used to describe the machinability of Inconel 718. Variations in the<br/>machinability of Inconel 718 products or components of a given type produced in different<br/>batches were analyzed. Industrial experiments were conducted to test the relationship<br/>between the polar diagram of the work material, its carbon content, and the tool wear of<br/>the ceramic cutting tools used in machining it. Work materials of Inconel 718 in which<br/>the polar diagrams of machinability were similar in size and shape exhibited very similar<br/>behavior during the cutting process. The polar diagram method employed appeared to be<br/>useful for selecting suitable cutting data for the machining of new materials.}},
  author       = {{Avdovic, Pajazit and Xu, Linhong and Andersson, Mats and Ståhl, Jan-Eric}},
  issn         = {{1528-8919}},
  keywords     = {{polar diagram; machinability; Inconel 718}},
  language     = {{eng}},
  number       = {{July}},
  pages        = {{113--133}},
  publisher    = {{American Society Of Mechanical Engineers (ASME)}},
  series       = {{Journal of Engineering for Gas Turbines and Power}},
  title        = {{Evaluating the Machinability of Inconel 718 Using Polar Diagrams}},
  url          = {{http://dx.doi.org/10.1115/1.4002679}},
  doi          = {{10.1115/1.4002679}},
  volume       = {{133}},
  year         = {{2011}},
}