Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

New manufacturing methods for electric motors using different soft magnetic material combinations

Siesing, Leif LU ; Reinap, Avo LU ; Andersson, Mats LU and Alaküla, Mats LU orcid (2012) 2nd International Electric Drive Production Conference (E|DPC), 2012 p.366-372
Abstract
This paper presents the manufacturing experience of an outer rotor permanent magnet synchronous machine with four different stators. The advantageous features of powder technology and molding techniques are tested when constructing and manufacturing the stators for a 28-pole 30-slot machine. The selected machine configuration is taking advantages of the concept of the modular windings and at the same time facing the challenges of undemanding winding production, which is suitable for injection and rotation molded magnetic cores. The geometric tolerances of the modular winding segments and the requirements for the electric insulation system have the main influence on the selection of alternatives methods for manufacturing powdered magnetic... (More)
This paper presents the manufacturing experience of an outer rotor permanent magnet synchronous machine with four different stators. The advantageous features of powder technology and molding techniques are tested when constructing and manufacturing the stators for a 28-pole 30-slot machine. The selected machine configuration is taking advantages of the concept of the modular windings and at the same time facing the challenges of undemanding winding production, which is suitable for injection and rotation molded magnetic cores. The geometric tolerances of the modular winding segments and the requirements for the electric insulation system have the main influence on the selection of alternatives methods for manufacturing powdered magnetic cores. The tight connection between the material engineering, research on the production techniques and the modeling of energy conversion processes have positively influenced the machine design towards improved electromagnetic and thermal characteristics of the product. The main outcomes of the manufacturing methods and electromagnetic design are discussed when combining the modular windings together with compression and molded soft magnetic composite powders. (Less)
Please use this url to cite or link to this publication:
author
; ; and
organization
publishing date
type
Chapter in Book/Report/Conference proceeding
publication status
published
subject
keywords
Manufacturing, molding, permanent magnet machines, soft magnetic materials, soft magnetic moldable composite, modular windings
host publication
[Host publication title missing]
editor
Hahn, I
pages
366 - 372
publisher
IEEE - Institute of Electrical and Electronics Engineers Inc.
conference name
2nd International Electric Drive Production Conference (E|DPC), 2012
conference location
Nuremberg, Germany
conference dates
2012-10-15 - 2012-10-18
external identifiers
  • wos:000317200200051
  • scopus:84874273193
ISBN
978-1-4673-3006-0
language
English
LU publication?
yes
id
84ba7b4f-0d12-41ed-a3f8-e87d58b427c1 (old id 3224298)
date added to LUP
2016-04-04 10:30:18
date last changed
2022-10-06 22:33:55
@inproceedings{84ba7b4f-0d12-41ed-a3f8-e87d58b427c1,
  abstract     = {{This paper presents the manufacturing experience of an outer rotor permanent magnet synchronous machine with four different stators. The advantageous features of powder technology and molding techniques are tested when constructing and manufacturing the stators for a 28-pole 30-slot machine. The selected machine configuration is taking advantages of the concept of the modular windings and at the same time facing the challenges of undemanding winding production, which is suitable for injection and rotation molded magnetic cores. The geometric tolerances of the modular winding segments and the requirements for the electric insulation system have the main influence on the selection of alternatives methods for manufacturing powdered magnetic cores. The tight connection between the material engineering, research on the production techniques and the modeling of energy conversion processes have positively influenced the machine design towards improved electromagnetic and thermal characteristics of the product. The main outcomes of the manufacturing methods and electromagnetic design are discussed when combining the modular windings together with compression and molded soft magnetic composite powders.}},
  author       = {{Siesing, Leif and Reinap, Avo and Andersson, Mats and Alaküla, Mats}},
  booktitle    = {{[Host publication title missing]}},
  editor       = {{Hahn, I}},
  isbn         = {{978-1-4673-3006-0}},
  keywords     = {{Manufacturing; molding; permanent magnet machines; soft magnetic materials; soft magnetic moldable composite; modular windings}},
  language     = {{eng}},
  pages        = {{366--372}},
  publisher    = {{IEEE - Institute of Electrical and Electronics Engineers Inc.}},
  title        = {{New manufacturing methods for electric motors using different soft magnetic material combinations}},
  year         = {{2012}},
}