Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

Phasor measurement applications in Scandinavia

Akke, Magnus LU and Karlsson, D (2002) IEEE/PES Transmission and Distribution Conference and Exhibition 2002: Asia Pacific 1. p.480-484
Abstract
There is a great potential for phasor measurement applications in Scandinavia, mainly due to the long distance power transmission and limited transmission capacity expansion possibilities. Smart control, based on phasor measurements, can be used as an alternative to additional transmission lines, to increase power transmission capacity. Also the matter of damping is more and more becoming a key issue, since load is slowly increasing and the de-regulation has caused an increase in fast and unexpected changes of generation dispatch and load flow. In Sweden an extensive optic fiber communication network has been installed along the transmission lines (mainly inside and around the ground wire at the top of the tower). Two test recordings have... (More)
There is a great potential for phasor measurement applications in Scandinavia, mainly due to the long distance power transmission and limited transmission capacity expansion possibilities. Smart control, based on phasor measurements, can be used as an alternative to additional transmission lines, to increase power transmission capacity. Also the matter of damping is more and more becoming a key issue, since load is slowly increasing and the de-regulation has caused an increase in fast and unexpected changes of generation dispatch and load flow. In Sweden an extensive optic fiber communication network has been installed along the transmission lines (mainly inside and around the ground wire at the top of the tower). Two test recordings have been performed to show the capability of synchronized phasor measurements. In Iceland phasors could be suitable input signal to damping equipment designed to mitigate system wide oscillations. An other test was made to see the "natural oscillations" between Sweden and Denmark during a 2 week period of very weak connection between the two areas. The Swedish railway is to a large extent fed by a 130 kV 16 2/3 Hz transmission line (/spl sim/1000 km). Transformers and converters then feed the contact line and the trains. Static phasor information would be a good input signal candidate to optimize the parallel converter operation. (Less)
Please use this url to cite or link to this publication:
author
and
organization
publishing date
type
Chapter in Book/Report/Conference proceeding
publication status
published
subject
host publication
IEEE/PES Transmission and Distribution Conference and Exhibition 2002: Asia Pacific
volume
1
pages
480 - 484
publisher
IEEE - Institute of Electrical and Electronics Engineers Inc.
conference name
IEEE/PES Transmission and Distribution Conference and Exhibition 2002: Asia Pacific
conference location
Yokohama, Japan
conference dates
2002-10-06 - 2002-10-10
external identifiers
  • scopus:0038309156
ISBN
0-7803-7525-4
DOI
10.1109/TDC.2002.1178428
language
English
LU publication?
yes
id
9a6d5314-f008-4857-8590-67d1da0345df (old id 698157)
date added to LUP
2016-04-04 11:40:37
date last changed
2022-03-15 23:41:58
@inproceedings{9a6d5314-f008-4857-8590-67d1da0345df,
  abstract     = {{There is a great potential for phasor measurement applications in Scandinavia, mainly due to the long distance power transmission and limited transmission capacity expansion possibilities. Smart control, based on phasor measurements, can be used as an alternative to additional transmission lines, to increase power transmission capacity. Also the matter of damping is more and more becoming a key issue, since load is slowly increasing and the de-regulation has caused an increase in fast and unexpected changes of generation dispatch and load flow. In Sweden an extensive optic fiber communication network has been installed along the transmission lines (mainly inside and around the ground wire at the top of the tower). Two test recordings have been performed to show the capability of synchronized phasor measurements. In Iceland phasors could be suitable input signal to damping equipment designed to mitigate system wide oscillations. An other test was made to see the "natural oscillations" between Sweden and Denmark during a 2 week period of very weak connection between the two areas. The Swedish railway is to a large extent fed by a 130 kV 16 2/3 Hz transmission line (/spl sim/1000 km). Transformers and converters then feed the contact line and the trains. Static phasor information would be a good input signal candidate to optimize the parallel converter operation.}},
  author       = {{Akke, Magnus and Karlsson, D}},
  booktitle    = {{IEEE/PES Transmission and Distribution Conference and Exhibition 2002: Asia Pacific}},
  isbn         = {{0-7803-7525-4}},
  language     = {{eng}},
  pages        = {{480--484}},
  publisher    = {{IEEE - Institute of Electrical and Electronics Engineers Inc.}},
  title        = {{Phasor measurement applications in Scandinavia}},
  url          = {{http://dx.doi.org/10.1109/TDC.2002.1178428}},
  doi          = {{10.1109/TDC.2002.1178428}},
  volume       = {{1}},
  year         = {{2002}},
}