Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

Modeling subsurface deformation induced by machining of Inconel 718

Agmell, M. LU ; Ahadi, A. LU ; Zhou, J. M. LU ; Peng, R.L. ; Bushlya, V. LU and Ståhl, J. E. LU (2017) In Machining Science and Technology 21(1). p.103-120
Abstract

Traditionally, the development and optimization of the machining process with regards to the subsurface deformation are done through experimental method which is often expensive and time consuming. This article presents the development of a finite element model based on an updated Lagrangian formulation. The numerical model is able to predict the depth of subsurface deformation induced in the high- speed machining of Inconel 718 by use of a whisker-reinforced ceramic tool. The effect that the different cutting parameters and tool microgeometries has on subsurface deformation will be investigated both numerically and experimentally. This research article also addresses the temperature distribution in the workpiece and the connection it... (More)

Traditionally, the development and optimization of the machining process with regards to the subsurface deformation are done through experimental method which is often expensive and time consuming. This article presents the development of a finite element model based on an updated Lagrangian formulation. The numerical model is able to predict the depth of subsurface deformation induced in the high- speed machining of Inconel 718 by use of a whisker-reinforced ceramic tool. The effect that the different cutting parameters and tool microgeometries has on subsurface deformation will be investigated both numerically and experimentally. This research article also addresses the temperature distribution in the workpiece and the connection it could have on the wear of the cutting tool. The correlation of the numerical and experimental investigations for the subsurface deformation has been measured by the use of the coefficient of determination, R2. This confirms that the finite element model developed here is able to simulate this type of machining process with sufficient accuracy.

(Less)
Please use this url to cite or link to this publication:
author
; ; ; ; and
organization
publishing date
type
Contribution to journal
publication status
published
subject
keywords
FEM, Inconel 718, machining, subsurface deformation
in
Machining Science and Technology
volume
21
issue
1
pages
18 pages
publisher
Taylor & Francis
external identifiers
  • scopus:85011357400
  • wos:000395039100006
ISSN
1091-0344
DOI
10.1080/10910344.2016.1260432
language
English
LU publication?
yes
id
354aa2ba-dc25-411e-a0ba-af984b37d463 (old id 8169227)
date added to LUP
2016-04-04 10:49:54
date last changed
2023-03-06 14:14:47
@article{354aa2ba-dc25-411e-a0ba-af984b37d463,
  abstract     = {{<p>Traditionally, the development and optimization of the machining process with regards to the subsurface deformation are done through experimental method which is often expensive and time consuming. This article presents the development of a finite element model based on an updated Lagrangian formulation. The numerical model is able to predict the depth of subsurface deformation induced in the high- speed machining of Inconel 718 by use of a whisker-reinforced ceramic tool. The effect that the different cutting parameters and tool microgeometries has on subsurface deformation will be investigated both numerically and experimentally. This research article also addresses the temperature distribution in the workpiece and the connection it could have on the wear of the cutting tool. The correlation of the numerical and experimental investigations for the subsurface deformation has been measured by the use of the coefficient of determination, R<sup>2</sup>. This confirms that the finite element model developed here is able to simulate this type of machining process with sufficient accuracy.</p>}},
  author       = {{Agmell, M. and Ahadi, A. and Zhou, J. M. and Peng, R.L. and Bushlya, V. and Ståhl, J. E.}},
  issn         = {{1091-0344}},
  keywords     = {{FEM; Inconel 718; machining; subsurface deformation}},
  language     = {{eng}},
  number       = {{1}},
  pages        = {{103--120}},
  publisher    = {{Taylor & Francis}},
  series       = {{Machining Science and Technology}},
  title        = {{Modeling subsurface deformation induced by machining of Inconel 718}},
  url          = {{http://dx.doi.org/10.1080/10910344.2016.1260432}},
  doi          = {{10.1080/10910344.2016.1260432}},
  volume       = {{21}},
  year         = {{2017}},
}