1 – 64 of 64
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=""
width=""
height=""
allowtransparency="true"
frameborder="0">
</iframe>
- 2021
-
Determination of coefficients of friction for laminated veneer lumber on steel under high pressure loads
Dorn, Michael ; Habrová, Karolína ; Koubek, Radek and Serrano, Erik LU
(2021)
In Friction
9(2).
p.367-379
Mark
- Simulation of wear and effective friction properties of microstructured surfaces
- Gear tolerancing for simultaneous optimization of transmission error and contact pressure
- 2020
-
A Comparison of Airborne Particles Generated from Disk Brake Contacts : Induction Versus Frictional Heating
Ma, Jijie ; Olofsson, Ulf ; Lyu, Yezhe ; Wahlström, Jens LU
; Åström, Anna Hedlund
and Tu, Minghui
(2020)
In Tribology Letters
68(1).
Mark
-
Friction, wear and airborne particle emission from Cu-free brake materials
Lyu, Yezhe ; Leonardi, Mara ; Wahlström, Jens LU
; Gialanella, Stefano
and Olofsson, Ulf
(2020)
In Tribology International
141.
Mark
-
A proposed driving cycle for brake emissions investigation for test stand
Perricone, Guido ; Alemani, Mattia ; Wahlström, Jens LU
and Olofsson, Ulf
(2020)
In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
234(1).
p.122-135
Mark
- Lubrication characteristics of wax esters from oils produced by a genetically-enhanced oilseed crop
-
A study of the effect of brake pad scorching on tribology and airborne particle emissions
Wahlström, Jens LU
; Leonardi, Mara
; Tu, Minghui
; Lyu, Yezhe
; Perricone, Guido
; Gialanella, Stefano
and Olofsson, Ulf
(2020)
In Atmosphere
11(5).
Mark
-
Recycling of worn out brake pads ‒ impact on tribology and environment
Lyu, Yezhe ; Ma, Jijie ; Åström, Anna Hedlund ; Wahlström, Jens LU
and Olofsson, Ulf
(2020)
In Scientific Reports
10(1).
Mark
- Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718
-
Airborne wear particle emissions produced during the dyno bench tests with a slag containing semi-metallic brake pads
Matějka, Vlastimil ; Perricone, Guido ; Vlček, Jozef ; Olofsson, Ulf and Wahlström, Jens LU
(2020)
In Atmosphere
11(11).
Mark
-
Influence of manufacturing error tolerances on contact pressure in gears
Hjelm, Rikard LU ; Hansson, Hans ; Ahadi, Aylin LU ; Andersson, Carin LU and Wahlström, Jens LU
(2020)
In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Mark
- Special issue editorial : Study of brake wear particle emissions
- Surface forces between bottlebrush polymer layers
- 2019
- Load effect on scratch micro-mechanisms of solution strengthened Compacted Graphite Irons
- Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries
- Experimental analysis of cutting edge effects on vibrations in end milling
- A pin-on-disc tribometer study of friction at low contact pressures and sliding speeds for a disc brake material combination
- A multi-scale simulation approach to investigate local contact temperatures for commercial Cu-full and Cu-free brake pads
-
A test stand study on the volatile emissions of a passenger car brake assembly
Perricone, Guido ; Matějka, Vlastimil ; Alemani, Mattia ; Wahlström, Jens LU
and Olofsson, Ulf
(2019)
In Atmosphere
10(5).
Mark
-
An FEA approach to simulate disc brake wear and airborne particle emissions
Riva, Gabriele ; Valota, Giorgio ; Perricone, Guido and Wahlström, Jens LU
(2019)
In Tribology International
138.
p.90-98
Mark
-
Simulation of contact area and pressure dependence of initial surface roughness for cermet-coated discs used in disc brakes
Riva, Gabriele ; Perricone, G. and Wahlström, J. LU
(2019)
In Tribology in Industry
41(1).
p.1-13
Mark
-
A pin-on-disc study on the tribology of cast iron, sinter and composite railway brake blocks at low temperatures
Lyu, Yezhe ; Bergseth, Ellen ; Wahlström, Jens LU
and Olofsson, Ulf
(2019)
In Wear
424-425.
p.48-52
Mark
-
Towards a two-part train traffic emissions factor model for airborne wear particles
Tu, Minghui ; Cha, Yingying ; Wahlström, Jens LU
and Olofsson, Ulf
(2019)
In Transportation Research Part D: Transport and Environment
67.
p.67-76
Mark
-
A comparison of airborne wear particle emission models based on metro station measurements
Tu, Minghui ; Wahlström, Jens LU
; Lyu, Yezhe
and Olofsson, Ulf
(2019)
10th International Scientific Conference BALTTRIB 2019
p.150-157
Mark
- 2018
-
Development of a simulation model to study tool loads in pcBN when machining AISI 316L
Agmell, Mathias LU ; Bushlya, Volodymyr LU ; Laakso, Sampsa LU
; Ahadi, Aylin
LU
and Ståhl, Jan-Eric
LU
(2018)
In International Journal of Advanced Manufacturing Technology
96(5-8).
p.2853-2865
Mark
- Prediction of the cutting forces in gear hobbing and the wear behaviour of the individual hob cutting teeth
- Minimum quantity lubrication (MQL) with carbon nanostructured additives in sheet metal forming
- Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning
-
A friction, wear and emission tribometer study of non-asbestos organic pins sliding against alsic mmc discs
Lyu, Yezhe ; Wahlström, J. LU
; Tu, M.
and Olofsson, U.
(2018)
In Tribology in Industry
40(2).
p.274-282
Mark
-
Scaling effects of measuring disc brake airborne particulate matter emissions – A comparison of a pin-on-disc tribometer and an inertia dynamometer bench under dragging conditions
Alemani, M. ; Wahlström, J. LU
; Matějka, V.
; Metinöz, I.
; Söderberg, A.
; Perricone, G.
and Olofsson, U.
(2018)
In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
232(12).
p.1538-1547
Mark
- On the influence of car brake system parameters on particulate matter emissions
-
A concept for reducing PM10 emissions for car brakes by 50%
Perricone, Guido ; Matějka, Vlastimil ; Alemani, Mattia ; Valota, Giorgio ; Bonfanti, Andrea ; Ciotti, Alessandro ; Olofsson, Ulf ; Söderberg, Anders ; Wahlström, Jens LU
and Nosko, Oleksii
, et al.
(2018)
In Wear
396-397.
p.135-145
Mark
- 2017
- Kinematics for unilateral constraints in multibody dynamics
- Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools
- Surface topography characterization of brass alloys: lead brass (CuZn39Pb3) and lead free brass (CuZn21Si3P)
-
Computational homogenisation for thermoviscoplasticity : application to thermally sprayed coatings
Berthelsen, Rolf ; Denzer, Ralf LU ; Oppermann, Philip LU
and Menzel, Andreas
LU
(2017)
In Computational Mechanics
60(5).
p.739-766
Mark
- Experimental and Numerical Investigation of Burr Formation in Intermittent Turning of AISI 4140
-
The Influence the Uncut Chip Thickness has on the Stagnation Point in Orthogonal Cutting
Agmell, Mathias LU ; Johansson, Daniel LU ; Laakso, Sampsa V.A. LU
; Ahadi, Aylin
LU
and Ståhl, Jan Eric
LU
(2017)
In Procedia CIRP
58.
p.13-18
Mark
- Assessment of Commonly used Tool Life Models in Metal Cutting
- Modeling of Force Build-up Process and Optimization of Tool Geometry when Intermittent Turning
- Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
- Nano-Scratching resistance of high-chromium white cast iron and its correlation with wear of cBN tool in machining
- An integrated cost model for metal cutting operations based on engagement time and a cost breakdown approach
-
Contact pressure and sliding velocity maps of the friction, wear and emission from a low-metallic/cast-iron disc brake contact pair
Wahlström, Jens LU
; Matějka, V.
; Lyu, Y.
and Söderberg, A.
(2017)
In Tribology in Industry
39(4).
p.460-470
Mark
-
On the running-in of brake pads and discs for dyno bench tests
Matějka, Vlastimil ; Metinöz, Ibrahim ; Wahlström, Jens LU
; Alemani, Mattia
and Perricone, Guido
(2017)
In Tribology International
115.
p.424-431
Mark
-
A pin-on-disc tribometer study of disc brake contact pairs with respect to wear and airborne particle emissions
Wahlström, Jens LU
; Lyu, Yezhe
; Matjeka, Vlastimil
and Söderberg, Anders
(2017)
In Wear
384-385.
p.124-130
Mark
-
Towards the ranking of airborne particle emissions from car brakes - A system approach
Perricone, Guido ; Alemani, Mattia ; Metinöz, Ibrahim ; Matějka, Vlastimil ; Wahlström, Jens LU
and Olofsson, Ulf
(2017)
In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
231(6).
p.781-797
Mark
- 2016
- A Factorial Design to Numerically Study the Effects of Brake Pad Properties on Friction and Wear Emissions
-
Towards a test stand for standardized measurements of the brake emissions
Perricone, Guido ; Wahlström, Jens LU
and Olofsson, Ulf
(2016)
In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
230(11).
p.1521-1528
Mark
- 2015
- A comparison of measured and simulated friction, wear, and particle emission of disc brakes
-
A field study of airborne particle emissions from automotive disc brakes
Wahlström, Jens LU
and Olofsson, Ulf
(2015)
In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
229(6).
p.747-757
Mark
- 2014
- Towards a cellular automaton to simulate friction, wear, and particle emission of disc brakes
- 2012
- A pin-on-disc study focusing on how different load levels affect the concentration and size distribution of airborne wear particles from the disc brake materials
- 2011
-
The tribological efficiency and the mechanism of action of nano-porous composition base brake lining materials
Kutelia, E. R. ; Gventsadze, D. I. ; Eristavil, B. G. ; Maisuradze, N. I. ; Tsurtsumia, O. O. ; Gventsadze, L. D. ; Olofsson, U. ; Wahlström, J. LU
and Olander, L.
(2011)
1st International Congress on Advances in Applied Physics and Materials Science, APMAS2011
In AIP Conference Proceedings
1400.
p.546-554
Mark
-
A study of airborne wear particles generated from organic railway brake pads and brake discs
Abbasi, Saeed ; Wahlström, Jens LU
; Olander, Lars
; Larsson, Christina
; Olofsson, Ulf
and Sellgren, Ulf
(2011)
In Wear
273(1).
p.93-99
Mark
-
A pin-on-disc investigation of novel nanoporous composite-based and conventional brake pad materials focussing on airborne wear particles
Wahlström, J. LU
; Gventsadze, D.
; Olander, L.
; Kutelia, E.
; Gventsadze, L.
; Tsurtsumia, O.
and Olofsson, U.
(2011)
In Tribology International
44(12).
p.1838-1843
Mark
- A cellular automaton approach to numerically simulate the contact situation in disc brakes
- 2010
-
Ultrafine particle formation from wear
Jansson, Anders ; Olander, Lars ; Olofsson, Ulf ; Sundh, Jon ; Söderberg, Anders and Wahlström, Jens LU
(2010)
In International Journal of Ventilation
9(1).
p.83-88
Mark
-
Size, shape, and elemental composition of airborne wear particles from disc brake materials
Wahlström, Jens LU
; Olander, Lars
and Olofsson, Ulf
(2010)
In Tribology Letters
38(1).
p.15-24
Mark
-
Airborne wear particles from passenger car disc brakes : A comparison of measurements from field tests, a disc brake assembly test stand, and a pin-on-disc machine
Wahlström, J. LU
; Söderberg, A.
; Olander, L.
; Olofsson, U.
and Jansson, A.
(2010)
In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
224(2).
p.179-188
Mark
-
A pin-on-disc simulation of airborne wear particles from disc brakes
Wahlström, Jens LU
; Söderberg, Anders
; Olander, Lars
; Jansson, Anders
and Olofsson, Ulf
(2010)
In Wear
268(5-6).
p.763-769
Mark
- 2009
-
Simulation of airborne wear particles from disc brakes
Wahlström, J. LU
; Söderberg, A.
and Olofsson, U.
(2009)
SAE 2009 Brake Colloquium and Exhibition, BRAKE 2009
In SAE Technical Papers
Mark
-
A disc brake test stand for measurement of airborne wear particles
Wahlström, Jens LU
; Söderberg, Anders
; Olander, Lars
and Olofsson, Ulf
(2009)
In Lubrication Science
21(6).
p.241-252
Mark