1 – 100 of 150
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2023
-
Mark
Φ-Sensitivity Evaluation of n-Butanol and Iso-Butanol Blends with Surrogate Gasoline
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An Optical Study of the Effects of Diesel-like Fuels with Different Densities on a Heavy-duty CI Engine with a Wave-shaped Piston Bowl Geometry
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optical Diagnostic Study on Improving Performance and Emission in Heavy-Duty Diesel Engines Using a Wave-Shaped Piston Bowl Geometry and Post Injection Strategies
(
- Contribution to journal › Article
-
Mark
The Influence of Ignition Control Parameters on Combustion Stability and Spark plug Wear in a Large Bore Gas Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Fresh and Aged Organic Aerosol Emissions from Renewable Diesel-Like Fuels HVO and RME in a Heavy-Duty Compression Ignition Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2022
-
Mark
An Experimental Investigation of Directly Injected E85 Fuel in a Heavy-Duty Compression Ignition Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Low Load Ignitability of Methanol in a Heavy-Duty Compression Ignition Engine
2022) SAE 2022 Powertrains, Fuels and Lubricants Conference and Exhibition, PFL 2022 In SAE Technical Papers(
- Contribution to journal › Article
- 2021
-
Mark
Effects of an Annular Piston Bowl-Rim Cavity on In-Cylinder and Engine-Out Soot of a Heavy-Duty Optical Diesel Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Stochastic Set-Point Optimization for In-Cycle Closed-Loop Combustion Control Operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
FPGA Implementation of In-Cycle Closed-Loop Combustion Control Methods
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2020
-
Mark
Optical Characterization of Methanol Sprays and Mixture Formation in a Compression-Ignition Heavy-Duty Engine
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of the Effect of Glow Plugs on Low Load Gasoline PPC
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Multi-Cylinder Adaptation of In-Cycle Predictive Combustion Models
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
In-Cycle Closed-Loop Combustion Control for Pilot Misfire Compensation
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optimization and Evaluation of a Low Temperature Waste Heat Recovery System for a Heavy Duty Engine over a Transient Cycle
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Transition from HCCI to PPC : Investigation of the Effect of Different Injection Timing on Ignition and Combustion Characteristics in an Optical PPC Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optical Characterization of the Combustion Process inside a Large-Bore Dual-Fuel Two-Stroke Marine Engine by Using Multiple High-Speed Cameras
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental and Numerical Assessment of Active Pre-chamber Ignition in Heavy Duty Natural Gas Stationary Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Impact of Multiple Injection Strategies on Efficiency and Combustion Characteristics in an Optical PPC Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Impact of Multiple Injection Strategies on Performance and Emissions of Methanol PPC under Low Load Operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of Injection Timing on Equivalence Ratio Stratification of Methanol and Isooctane in a Heavy-Duty Compression Ignition Engine
2020) SAE 2020 International Powertrains, Fuels and Lubricants Meeting, PFL 2020 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2019
-
Mark
Interaction between Fuel Jets and Prevailing Combustion During Closely-Coupled Injections in an Optical LD Diesel Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal Reduction of NOx in a Double Compression Expansion Engine by Injection of AAS 25 and AUS 32 in the Exhaust Gases
2019) SAE 2019 International Powertrains, Fuels and Lubricants Meeting, FFL 2019 In SAE Technical Papers 2019.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optical Investigation on the Combustion Process Differences between Double-Pilot and Closely-Coupled Triple-Pilot Injection Strategies in a LD Diesel Engine
2019) SAE 2019 International Powertrains, Fuels and Lubricants Meeting, FFL 2019 In SAE Technical Papers 2019-January.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulation of System Brake Efficiency in a Double Compression-Expansion Engine-Concept (DCEE) Based on Experimental Combustion Data
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of in-cylinder flow simplifications on turbulent mixing at varying injection timings in a piston bowl ppc engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulation based investigation of achieving low temperature combustion with methanol in a direct injected compression ignition engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The relevance of different fuel indices to describe autoignition behaviour of gasoline in light duty dici engine under ppc mode
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Measurement of gasoline exhaust particulate matter emissions with a wide-range EGR in a heavy-duty diesel engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of injection timing on the ignition and mode of combustion in a HD ppc engine running low load
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study on heat losses during flame impingement in a diesel engine using phosphor thermometry surface temperature measurements
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison of kinetic mechanisms for numerical simulation of methanol combustion in dici heavy-duty engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cylinder to cylinder variation related to gas injection timing on a dual-fuel engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Learning Based Model Predictive Control of Combustion Timing in Multi-Cylinder Partially Premixed Combustion Engine
2019) In SAE Technical Papers(
- Contribution to journal › Article
-
Mark
Influence of Injection Strategies on Engine Efficiency for a Methanol PPC Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Literature Review on Dual-Fuel Combustion Modelling
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Large Eddy Simulation of an Ignition Front in a Heavy Duty Partially Premixed Combustion Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical Investigation of Methanol Ignition Sequence in an Optical PPC Engine with Multiple Injection Strategies
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Coupled Tabulated Kinetics and Flame Propagation Model for the Simulation of Fumigated Medium Speed Dual-Fuel Engines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of In-Cylinder Flow Structures on Soot Formation and Oxidation in a Swirl-Supported Light-Duty Diesel Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Impact of Octane Number and Injection Timing on Autoignition Behaviour of Gasoline and PRF in PPC
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical Optimization of Compression Ratio for a PPC Engine running on Methanol
2019) 2019 JSAE/SAE Powertrains, Fuels and Lubricants International Meeting, JSAE 2019 In SAE Technical Papers(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison of heat losses at the impingement point and in between two impingement points in a diesel engine using phosphor thermometry
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Regulated Emissions and Detailed Particle Characterisation for Diesel and RME Biodiesel Fuel Combustion with Varying EGR in a Heavy-Duty Engine
2019) JSAE/SAE 2019 International Powertrains, Fuels and Lubricants Meeting In SAE Technical Paper Series 2019(December).(
- Contribution to journal › Article
- 2018
-
Mark
A Numerical Study on the Sensitivity of Soot and NOx Formation to the Operating Conditions in Heavy Duty Engines
(
- Contribution to journal › Article
-
Mark
Ultra-High Speed Fuel Tracer PLIF Imaging in a Heavy-Duty Optical PPC Engine
(
- Contribution to journal › Article
-
Mark
Mechanisms of Post-Injection Soot-Reduction Revealed by Visible and Diffused Back-Illumination Soot Extinction Imaging
(
- Contribution to journal › Article
-
Mark
Lift-Off Lengths in an Optical Heavy-Duty Engine Operated at High Load with Low and High Octane Number Fuels
(
- Contribution to journal › Article
-
Mark
Investigation of Particle Number Emission Characteristics in a Heavy-Duty Compression Ignition Engine Fueled with Hydrotreated Vegetable Oil (HVO)
(
- Contribution to journal › Article
-
Mark
Double Compression Expansion Engine Concepts : Efficiency Analysis over a Load Range
(
- Contribution to journal › Article
-
Mark
The Potential of SNCR Based NOx Reduction in a Double Compression Expansion Engine
(
- Contribution to journal › Article
-
Mark
Heat Loss Analysis for Various Piston Geometries in a Heavy-Duty Methanol PPC Engine
2018) SAE 2018 International Powertrains, Fuels and Lubricants Meeting, FFL 2018 In SAE Technical Papers 2018-September.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of Piston Geometry on Stratification Formation in the Transition from HCCI to PPC
2018) SAE 2018 International Powertrains, Fuels and Lubricants Meeting, FFL 2018 In SAE Technical Papers 2018-September.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analyzing Factors Affecting Gross Indicated Efficiency When Inlet Temperature Is Changed
(
- Contribution to journal › Article
- 2017
-
Mark
Humid Air Motor : A Novel Concept to Decrease the Emissions Using the Exhaust Heat
(
- Contribution to journal › Article
-
Mark
Numerical Estimation of Asymmetry of In-Cylinder Flow in a Light Duty Direct Injection Engine with Re-Entrant Piston Bowl
(
- Contribution to journal › Article
-
Mark
Optimum Heat Release Rates for a Double Compression Expansion (DCEE) Engine
(
- Contribution to journal › Article
-
Mark
Parametric Analysis of the Effect of Pilot Quantity, Combustion Phasing and EGR on Efficiencies of a Gasoline PPC Light-Duty Engine
(
- Contribution to journal › Article
-
Mark
Effect of Start of Injection on the Combustion Characteristics in a Heavy-Duty DICI Engine Running on Methanol
(
- Contribution to journal › Article
-
Mark
Optical Study of Fuel Spray Penetration and Initial Combustion Location under PPC Conditions
(
- Contribution to journal › Article
-
Mark
Effects of Post-Injections Strategies on UHC and CO at Gasoline PPC Conditions in a Heavy-Duty Optical Engine
(
- Contribution to journal › Article
-
Mark
Control-Oriented Modeling of Soot Emissions in Gasoline Partially Premixed Combustion with Pilot Injection
(
- Contribution to journal › Article
-
Mark
A Study on the Effect of Elevated Coolant Temperatures on HD Engines
(
- Contribution to journal › Article
-
Mark
Combined Low and High Pressure EGR for Higher Brake Efficiency with Partially Premixed Combustion
2017) In SAE Technical Papers(
- Contribution to journal › Article
-
Mark
Comparison of Gasoline and Primary Reference Fuel in the Transition from HCCI to PPC
(
- Contribution to journal › Article
-
Mark
Influence of Small Pilot on Main Injection in a Heavy-Duty Diesel Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2016
-
Mark
Influence of Injection Timing on Exhaust Particulate Matter Emissions of Gasoline in HCCI and PPC
(
- Contribution to journal › Article
-
Mark
A Droplet Size Investigation and Comparison Using a Novel Biomimetic Flash-Boiling Injector for AdBlue Injections
(
- Contribution to journal › Article
-
Mark
NOx-Conversion and Activation Temperature of a SCR-Catalyst Whilst Using a Novel Biomimetic Flash-Boiling AdBlue Injector on a LD Engine
(
- Contribution to journal › Article
-
Mark
Comparison of Laser-Extinction and Natural Luminosity Measurements for Soot Probing in Diesel Optical Engines
(
- Contribution to journal › Article
-
Mark
Combustion and Emission Characteristics of a Heavy Duty Engine Fueled with Two Ternary Blends of N-Heptane/Iso-Octane and Toluene or Benzaldehyde
(
- Contribution to journal › Article
- 2015
-
Mark
Effect of Pre-Chamber Volume and Nozzle Diameter on Pre-Chamber Ignition in Heavy Duty Natural Gas Engines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Sensitivity Analysis of Partially Premixed Combustion (PPC) for Control Purposes
2015) In SAE Technical Paper Series(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of Injection Strategies on Fluid Flow and Turbulence in Partially Premixed Combustion (PPC) in a Light Duty Engine
(
- Contribution to journal › Article
-
Mark
A Study of In-Cylinder Soot Oxidation by Laser Extinction Measurements During an EGR-Sweep in an Optical Diesel Engine
(
- Contribution to journal › Article
- 2014
-
Mark
Multi Cylinder Partially Premixed Combustion Performance Using Commercial Light-Duty Engine Hardware
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2013
-
Mark
A Correlation Analysis of the Roles of Soot Formation and Oxidation in a Heavy-Duty Diesel Engine
2013) SAE/KSAE , International Powertrains, Fuels & Lubricants Meeting, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Reducing the Cycle-Cycle Variability of a Natural Gas Engine Using Controlled Ignition Current
2013) SAE World Congress & Exhibition, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
System Simulations to Evaluate the Potential Efficiency of Humid Air Motors
2013) SAE/KSAE , International Powertrains, Fuels & Lubricants Meeting, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Study on In-Cycle Control of NOx Using Injection Strategy with a Fast Cylinder Pressure Based Emission Model as Feedback
2013) SAE/KSAE , International Powertrains, Fuels & Lubricants Meeting, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison of Negative Valve Overlap (NVO) and Rebreathing Valve Strategies on a Gasoline PPC Engine at Low Load and Idle Operating Conditions
2013) SAE World Congress & Exhibition, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Evaluation of a Novel High Frequency Ignition System Using a Flow-Reactor Set-up
2013) SAE/KSAE , International Powertrains, Fuels & Lubricants Meeting, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2012
-
Mark
Investigation of Performance and Emission Characteristics of a Heavy Duty Natural Gas Engine Operated with Pre-Chamber Spark Plug and Dilution with Excess Air and EGR
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The Usefulness of Negative Valve Overlap for Gasoline Partially Premixed Combustion, PPC
2012) SAE 2012 International Powertrains, Fuels & Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Large Eddy Simulation of Partially Premixed Combustion in an Internal Combustion Engine
2012) SAE 2012 World Congress & Exhibition(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical Simulation of the ECN Spray A Using Multidimensional Chemistry Coordinate Mapping: n-Dodecane Diesel Combustion
2012) SAE 2012 International Powertrains, Fuels & Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Gasoline Partially Premixed Combustion in a Light Duty Engine at Low Load and Idle Operating Conditions
2012) SAE World Congress & Exhibition, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Waste Heat Recovery from Multiple Heat Sources in a HD Truck Diesel Engine Using a Rankine Cycle - A Theoretical Evaluation
2012) SAE 2012 International Powertrains, Fuels & Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Comparative Analysis of WHR System in HD Engines Using Conventional Diesel Combustion and Partially-Premixed Combustion
2012) SAE Commercial Vehicle Engineering Congress(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Applicability of Ionization Current Sensing Technique with Plasma Jet Ignition Using PreChamber Spark Plug in a Heavy Duty Natural Gas Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Machine-Learning Approach to Information Extraction from Cylinder Pressure Sensors
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2011
-
Mark
Extending the Operating Region of Multi-Cylinder Partially Premixed Combustion using High Octane Number Fuel
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Reducing Throttle Losses Using Variable Geometry Turbine (VGT) in a Heavy-Duty Spark-Ignited Natural Gas Engine
2011) JSAE/SAE International Fuels & Lubricants Conference(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Future Engine Control Enabling Environment Friendly Vehicle
2011) SAE World Congress & Exhibition, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation and Comparison of Multi Cylinder Partially Premixed Combustion Characteristics for Diesel and Gasoline Fuels
2011) JSAE/SAE International Fuels & Lubricants Conference(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation and Comparison of Residual Gas Enhanced HCCI using Trapping (NVO HCCI) or Rebreathing of Residual Gases
2011) JSAE/SAE International Fuels & Lubricants Conference(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigating Mode Switch from SI to HCCI using Early Intake Valve Closing and Negative Valve Overlap
(
- Contribution to journal › Article
- 2010
-
Mark
Flow and Temperature Distribution in an Experimental Engine: LES Studies and Thermographic Imaging
2010) In SAE technical paper series(
- Contribution to journal › Article
-
Mark
Effects of Negative Valve Overlap on the Auto-Ignition Process of Lean Ethanol/Air Mixture in HCCI-Engines
2010) In SAE technical paper series(
- Contribution to journal › Article
-
Mark
Unburned Hydro Carbon (HC) estimation using a self-tuned heat release method
2010) In SAE Technical Papers(
- Contribution to journal › Article