Skip to main content

LUP Student Papers

LUND UNIVERSITY LIBRARIES

PLC-programmering av en pelletspanna

Taqawi, Zaker LU and Abou Naasa, Mohammed LU (2023) EITL05 20231
Department of Electrical and Information Technology
Abstract (Swedish)
Detta examensarbete handlar om PLC-programmering av en pelletspanna till ett nytt
fjärrvärmeverk som byggs i Landskronas stadsdel Örja i samarbete med Deterministic
Control AB, för en slutkund Landskrona Energi AB. Material som P&I-schema,
funktionsbeskrivning, I/O-lista levererades av ett annat företag, AKJ. All programmering
görs i ett ABB 800xA-system.
De viktiga begrepp som examensarbetet vidrör, beskrivits i avsnittet teknisk bakgrund,
nämligen funktionsbeskrivning, P&I-schema, KKS (Kraftwerk-Kennzeichen-System) och så
vidare. Mjukvaror som har använts för programmering och uppbyggnad av processbilder i
ABB 800xA-system har också beskrivits, som Control Builder, Function Designer och Plant
Explorer.
Rapporten nedan beskriver... (More)
Detta examensarbete handlar om PLC-programmering av en pelletspanna till ett nytt
fjärrvärmeverk som byggs i Landskronas stadsdel Örja i samarbete med Deterministic
Control AB, för en slutkund Landskrona Energi AB. Material som P&I-schema,
funktionsbeskrivning, I/O-lista levererades av ett annat företag, AKJ. All programmering
görs i ett ABB 800xA-system.
De viktiga begrepp som examensarbetet vidrör, beskrivits i avsnittet teknisk bakgrund,
nämligen funktionsbeskrivning, P&I-schema, KKS (Kraftwerk-Kennzeichen-System) och så
vidare. Mjukvaror som har använts för programmering och uppbyggnad av processbilder i
ABB 800xA-system har också beskrivits, som Control Builder, Function Designer och Plant
Explorer.
Rapporten nedan beskriver processen för programmering av huvuddelar i pelletspannan, som
luftsotning, roster, fläktar och så vidare, samt vilket programmeringsspråk som lämpade sig
bäst för programmering av en del i pelletspannan. Därefter beskrivs kortfattat framtagning av
processbilder. Examensarbetet framlägger även de erfarenheter av ett verkligt projekt som
görs för en slutkund, och hur en programmerare behöver anpassa sig efter en kunds behov.
Dessutom analyseras programmeringen i Function Designer enligt slutkundens önskemål
samt de utmaningar och problem som uppstod under programmeringen.
Rapporten redogör dessutom för hur ett verkligt arbetsprojekt som kan utformas när flera
parter är involverade, nämligen AKJ, Landskrona Energi AB och Deterministic Control AB. (Less)
Abstract
This thesis concerns the PLC-programming of a pellet boiler for a new district heating plant
being built in the Örja district of Landskrona in collaboration with Deterministic Control AB,
for a final customer, Landskrona Energi AB. Material such as PI diagrams, functional
descriptions, and I/O-lists were provided by another company, AKJ. All programming is
carried out in an ABB 800xA system.
The important concepts related to the thesis are described in the technical background,
namely functional description, PI diagrams, KKS (Kraftwerk-Kennzeichen-System), and so
on. Software used for programming and building process graphics in the ABB 800xA system
have also been described, such as Control Builder, Function Designer, and Plant... (More)
This thesis concerns the PLC-programming of a pellet boiler for a new district heating plant
being built in the Örja district of Landskrona in collaboration with Deterministic Control AB,
for a final customer, Landskrona Energi AB. Material such as PI diagrams, functional
descriptions, and I/O-lists were provided by another company, AKJ. All programming is
carried out in an ABB 800xA system.
The important concepts related to the thesis are described in the technical background,
namely functional description, PI diagrams, KKS (Kraftwerk-Kennzeichen-System), and so
on. Software used for programming and building process graphics in the ABB 800xA system
have also been described, such as Control Builder, Function Designer, and Plant Explorer.
The report below describes the process of programming the main components of the pellet
boiler, such as air soot blowing, grate, fans, and so on, as well as the programming language
that was best suited for programming a part of the pellet boiler. The creation of process
graphics is also briefly described. The thesis also presents the experiences of a real project
carried out for a final customer, and how a programmer needs to adapt to a customer's needs.
In addition, the programming in Function Designer is analyzed according to the final
customer's requirements, as well as the challenges and problems encountered during
programming.
Furthermore, the report describes the experience of how a real project can look like,
especially when multiple parties are involved, namely AKJ, Landskrona Energi AB, and
Deterministic Control AB. (Less)
Please use this url to cite or link to this publication:
author
Taqawi, Zaker LU and Abou Naasa, Mohammed LU
supervisor
organization
course
EITL05 20231
year
type
M2 - Bachelor Degree
subject
keywords
P&I-schema, funktionsbeskrivning, Control Builder, Function Designer, I/O lista, HMI, PLC, KKS, 800xA-system
report number
LU/LTH-EIT 2023-923
language
Swedish
id
9124248
date added to LUP
2023-06-15 12:05:41
date last changed
2023-08-02 14:43:56
@misc{9124248,
  abstract     = {{This thesis concerns the PLC-programming of a pellet boiler for a new district heating plant
being built in the Örja district of Landskrona in collaboration with Deterministic Control AB,
for a final customer, Landskrona Energi AB. Material such as PI diagrams, functional
descriptions, and I/O-lists were provided by another company, AKJ. All programming is
carried out in an ABB 800xA system.
The important concepts related to the thesis are described in the technical background,
namely functional description, PI diagrams, KKS (Kraftwerk-Kennzeichen-System), and so
on. Software used for programming and building process graphics in the ABB 800xA system
have also been described, such as Control Builder, Function Designer, and Plant Explorer.
The report below describes the process of programming the main components of the pellet
boiler, such as air soot blowing, grate, fans, and so on, as well as the programming language
that was best suited for programming a part of the pellet boiler. The creation of process
graphics is also briefly described. The thesis also presents the experiences of a real project
carried out for a final customer, and how a programmer needs to adapt to a customer's needs.
In addition, the programming in Function Designer is analyzed according to the final
customer's requirements, as well as the challenges and problems encountered during
programming.
Furthermore, the report describes the experience of how a real project can look like,
especially when multiple parties are involved, namely AKJ, Landskrona Energi AB, and
Deterministic Control AB.}},
  author       = {{Taqawi, Zaker and Abou Naasa, Mohammed}},
  language     = {{swe}},
  note         = {{Student Paper}},
  title        = {{PLC-programmering av en pelletspanna}},
  year         = {{2023}},
}