Utveckling av slangindragning till bensinpumpar
(2009) MMK820Innovation
- Abstract
- This report is a result of a Master thesis that was carried out at Dresser Wayne AB and at
the Division of Machine Design at the Department of Design Sciences LTH.
The thesis was written as a product development report and essentially follows the
method described by Ulrich and Eppinger found in the publication Product Design and
Development.
The objective of the Master Thesis was to design and build a prototype of a new hose
retractor for Dresser Wayne’s new generation of dispensers. One retractor is supposed to
retract all hoses on one side of the dispenser.
The new retractor concept was based on a pulley system. Tests showed that the way to
power the retractor was with a rubber band. The testes were preformed in an experiment
... (More) - This report is a result of a Master thesis that was carried out at Dresser Wayne AB and at
the Division of Machine Design at the Department of Design Sciences LTH.
The thesis was written as a product development report and essentially follows the
method described by Ulrich and Eppinger found in the publication Product Design and
Development.
The objective of the Master Thesis was to design and build a prototype of a new hose
retractor for Dresser Wayne’s new generation of dispensers. One retractor is supposed to
retract all hoses on one side of the dispenser.
The new retractor concept was based on a pulley system. Tests showed that the way to
power the retractor was with a rubber band. The testes were preformed in an experiment
dispenser on Dresser Wayne.
The pulley concept is a simple and uncomplicated solution to the problem that could
compete with Dresser Wayne’s existing retractors. The concept needs further test and
development before it can be used in a commercial fuel dispensers. (Less)
Please use this url to cite or link to this publication:
http://lup.lub.lu.se/student-papers/record/1544523
- author
- Persson, Martin and Dahlström, Johan
- supervisor
- organization
- course
- MMK820
- year
- 2009
- type
- H2 - Master's Degree (Two Years)
- subject
- keywords
- Product development, fuel dispenser, hose retractor
- language
- Swedish
- id
- 1544523
- date added to LUP
- 2010-02-11 15:25:15
- date last changed
- 2010-02-11 15:25:15
@misc{1544523, abstract = {{This report is a result of a Master thesis that was carried out at Dresser Wayne AB and at the Division of Machine Design at the Department of Design Sciences LTH. The thesis was written as a product development report and essentially follows the method described by Ulrich and Eppinger found in the publication Product Design and Development. The objective of the Master Thesis was to design and build a prototype of a new hose retractor for Dresser Wayne’s new generation of dispensers. One retractor is supposed to retract all hoses on one side of the dispenser. The new retractor concept was based on a pulley system. Tests showed that the way to power the retractor was with a rubber band. The testes were preformed in an experiment dispenser on Dresser Wayne. The pulley concept is a simple and uncomplicated solution to the problem that could compete with Dresser Wayne’s existing retractors. The concept needs further test and development before it can be used in a commercial fuel dispensers.}}, author = {{Persson, Martin and Dahlström, Johan}}, language = {{swe}}, note = {{Student Paper}}, title = {{Utveckling av slangindragning till bensinpumpar}}, year = {{2009}}, }