Skip to main content

LUP Student Papers

LUND UNIVERSITY LIBRARIES

Konstruktion av doseringssystem för tillsatsämne till dieselpump

Stojcic, Dejan LU (2012) In Konstruktion av doseringssystem för tillsatsämne till dieselpump MMK820 20121
Innovation
Abstract
This thesis describes the development process of an additive dosage system for a fuel dispenser. The level of additive concentration is low (<1000 ppm) and three predefined concentration levels are selectable for each filling. A device to visualize the additive dosing, when chosen, was also required. These prerequisites influenced the decision to design a separate additive system for pumping, metering, distribution and visualization. The fuel system and the additive system were connected for blending at the dispenser nozzle to be able to fully control the additive concentration level for each filling.

The purpose of the thesis was to design a system, based on the prerequisites above, and to build a fully functioning prototype.
Please use this url to cite or link to this publication:
author
Stojcic, Dejan LU
supervisor
organization
alternative title
Design of fuel additive dosing system for diesel dispenser
course
MMK820 20121
year
type
H2 - Master's Degree (Two Years)
subject
keywords
Dosage system, design, additive, diesel pump, sight glass, nozzle.
publication/series
Konstruktion av doseringssystem för tillsatsämne till dieselpump
report number
11/5435
language
Swedish
id
2340198
date added to LUP
2012-02-09 13:19:06
date last changed
2012-02-09 13:19:06
@misc{2340198,
  abstract     = {{This thesis describes the development process of an additive dosage system for a fuel dispenser. The level of additive concentration is low (<1000 ppm) and three predefined concentration levels are selectable for each filling. A device to visualize the additive dosing, when chosen, was also required. These prerequisites influenced the decision to design a separate additive system for pumping, metering, distribution and visualization. The fuel system and the additive system were connected for blending at the dispenser nozzle to be able to fully control the additive concentration level for each filling.

The purpose of the thesis was to design a system, based on the prerequisites above, and to build a fully functioning prototype.}},
  author       = {{Stojcic, Dejan}},
  language     = {{swe}},
  note         = {{Student Paper}},
  series       = {{Konstruktion av doseringssystem för tillsatsämne till dieselpump}},
  title        = {{Konstruktion av doseringssystem för tillsatsämne till dieselpump}},
  year         = {{2012}},
}