Performance and Wear Behavior of Ultra-Hard Cutting Tools during Machining of Titanium Alloy
(2018) MMTM01 20181Production and Materials Engineering
- Abstract
- Since the 1950’s, a wide range of titanium alloys has been developed. Attractive titanium properties are the high strength-to-weight ratio, resistance towards corrosion, low thermal conductivity and low thermal expansion. Properties that make titanium alloys difficult-to-machine materials are those of low thermal conductivity, chemical reactiveness and the high strength, requiring low cutting data, resulting in low material removal rate and therefore high manufacturing costs. This implicates the importance of solutions for high speed machining and knowledge about wear mechanisms and machining performance.
The most commonly used cutting tool for machining in titanium alloys are those of cemented carbide with sharp edges. The study includes... (More) - Since the 1950’s, a wide range of titanium alloys has been developed. Attractive titanium properties are the high strength-to-weight ratio, resistance towards corrosion, low thermal conductivity and low thermal expansion. Properties that make titanium alloys difficult-to-machine materials are those of low thermal conductivity, chemical reactiveness and the high strength, requiring low cutting data, resulting in low material removal rate and therefore high manufacturing costs. This implicates the importance of solutions for high speed machining and knowledge about wear mechanisms and machining performance.
The most commonly used cutting tool for machining in titanium alloys are those of cemented carbide with sharp edges. The study includes a range of cutting tool materials: cemented carbides (coated and uncoated), PCD and cBN, to compare and analyze with regard to wear mechanisms and chemical reactions in the cutting tool.
This study investigates the machining performance and wear mechanisms during high speed machining in (α + β)-alloy Ti6Al4V, the most commonly used titanium alloy. The cutting data are for finishing operations, where tolerances and surface roughness are essential result parameters. The machining is performed with longitudinal continuous turning under application of high-pressure coolant.
Cutting tools of interest (PCD and pcBN) are subjected to in-depth microscopic analysis with FIB-SEM and TEM. Selected cutting tools are subjected to cost-efficiency to present the results regarding machining performance and cutting tool cost in context.
The pointed cutting tools shows that UCC 2 has a better cost efficiency compared to CCC 1. For the higher values of the cutting speed for UCC 2 and PCD 8, PCD 8 is superior regarding cost efficiency compared to UCC 2. PCD 8 has got a better cost efficiency compared to cBN 2.
The chemical analysis with TEM on PCD 8 and cBN 2 is somewhat difficult to read. There are small boundary areas between the cutting tool material and the adhered workpiece material. Probably, there are formations of titanium carbides or diffusion of carbon into the workpiece material in the cutting tool PCD 8. Between the diamond grains, there seems to have been titanium working its way down into the cutting tool material. Regarding cBN 2, the boundary area between the cutting tool material and the adhered workpiece material are somewhat sharp. There might be formations of titanium nitrides in this boundary area or possibly diffusion of boron or nitride into the workpiece material. Leftover elements from the cutting tool manufacturing process are noted. (Less)
Please use this url to cite or link to this publication:
http://lup.lub.lu.se/student-papers/record/8956434
- author
- Lindvall, Rebecka LU
- supervisor
- organization
- course
- MMTM01 20181
- year
- 2018
- type
- H2 - Master's Degree (Two Years)
- subject
- keywords
- Metal cutting, Machining performance, Titanium machining, Ti6Al4V, (α + β)-alloy, Tool wear, Wear mechanisms, Cost efficiency, Colding analysis, Cemented carbide, PCD, pcBN, TEM
- report number
- LUTMDN/(TMMV-5298)/1-134/2018
- language
- English
- id
- 8956434
- date added to LUP
- 2018-08-28 10:44:38
- date last changed
- 2018-09-03 13:59:48
@misc{8956434,
abstract = {{Since the 1950’s, a wide range of titanium alloys has been developed. Attractive titanium properties are the high strength-to-weight ratio, resistance towards corrosion, low thermal conductivity and low thermal expansion. Properties that make titanium alloys difficult-to-machine materials are those of low thermal conductivity, chemical reactiveness and the high strength, requiring low cutting data, resulting in low material removal rate and therefore high manufacturing costs. This implicates the importance of solutions for high speed machining and knowledge about wear mechanisms and machining performance.
The most commonly used cutting tool for machining in titanium alloys are those of cemented carbide with sharp edges. The study includes a range of cutting tool materials: cemented carbides (coated and uncoated), PCD and cBN, to compare and analyze with regard to wear mechanisms and chemical reactions in the cutting tool.
This study investigates the machining performance and wear mechanisms during high speed machining in (α + β)-alloy Ti6Al4V, the most commonly used titanium alloy. The cutting data are for finishing operations, where tolerances and surface roughness are essential result parameters. The machining is performed with longitudinal continuous turning under application of high-pressure coolant.
Cutting tools of interest (PCD and pcBN) are subjected to in-depth microscopic analysis with FIB-SEM and TEM. Selected cutting tools are subjected to cost-efficiency to present the results regarding machining performance and cutting tool cost in context.
The pointed cutting tools shows that UCC 2 has a better cost efficiency compared to CCC 1. For the higher values of the cutting speed for UCC 2 and PCD 8, PCD 8 is superior regarding cost efficiency compared to UCC 2. PCD 8 has got a better cost efficiency compared to cBN 2.
The chemical analysis with TEM on PCD 8 and cBN 2 is somewhat difficult to read. There are small boundary areas between the cutting tool material and the adhered workpiece material. Probably, there are formations of titanium carbides or diffusion of carbon into the workpiece material in the cutting tool PCD 8. Between the diamond grains, there seems to have been titanium working its way down into the cutting tool material. Regarding cBN 2, the boundary area between the cutting tool material and the adhered workpiece material are somewhat sharp. There might be formations of titanium nitrides in this boundary area or possibly diffusion of boron or nitride into the workpiece material. Leftover elements from the cutting tool manufacturing process are noted.}},
author = {{Lindvall, Rebecka}},
language = {{eng}},
note = {{Student Paper}},
title = {{Performance and Wear Behavior of Ultra-Hard Cutting Tools during Machining of Titanium Alloy}},
year = {{2018}},
}