Skip to main content

LUP Student Papers

LUND UNIVERSITY LIBRARIES

DYNAMIC RESPONSE OF CROSS LAMINATED TIMBER FLOORS SUBJECT TO INTERNAL LOADS

Skoglund, Jacob LU (2020) In TVSM-5000 VSMM01 20201
Structural Mechanics
Abstract
The deregulation of timber for use in large scale constructions has seen the addition of new innovative timber-based products to a category of products referred to as engineered wood products. A now well established addition to these products is cross laminated timber, or CLT for short. CLT products use a form of orthogonal layering, where several parallel wooden boards are arranged in a number of layers, each layer being orthogonal to the previous. The use of orthogonal layering allows for increased stiffness in the two plane directions, resulting in a lightweight construction product with high load bearing capacity and stiffness.

To evaluate the dynamic behaviour of structures, engineers commonly apply the finite element method, where... (More)
The deregulation of timber for use in large scale constructions has seen the addition of new innovative timber-based products to a category of products referred to as engineered wood products. A now well established addition to these products is cross laminated timber, or CLT for short. CLT products use a form of orthogonal layering, where several parallel wooden boards are arranged in a number of layers, each layer being orthogonal to the previous. The use of orthogonal layering allows for increased stiffness in the two plane directions, resulting in a lightweight construction product with high load bearing capacity and stiffness.

To evaluate the dynamic behaviour of structures, engineers commonly apply the finite element method, where a system of equations are solved numerically. Given a sufficient amount of computational power and time, the finite element method can help to solve most dynamical problems. For sufficiently large or complex structures the amount of resources needed may be outside the scope of possibility or feasibility for many. Therefore, evaluating the usage of certain design simplifications, such as omitting to models aspects of the geometry, or alternative forms of analysis for CLT panels may help to reduce the time and resources required for an analysis.

In this Master's dissertation, a seven-layer CLT-panel has been created. In the model, each individual board and the gaps between the boards are modelled. The seven-layer model is used as a reference to evaluate the possibility of using less detailed alternative models. The alternative models are created as a layered 3D model and a composite 2D model, both models omit the modelling of the individual laminations, resulting in the layers being solid.

The results show small errors for the alternative models when using modal analysis. Concluding that the modal behaviour and dynamic response of a CLT panel can be evaluated using a composite 2D model or a less-detailed layered 3D model. This significantly reduces the amount of time and computational power needed for an analysis, and clearly indicates the benefit of using alternative less detailed models. (Less)
Popular Abstract (Swedish)
Korslimmat trä, eller KL-trä, har gett nya möjligheter för storskaligt byggande av träkonstruktioner. Träets låga egenvikt kan dock resultera i ökad risk för vibrationer som upplevs obehagliga och mentalt påfrestande. Därför behövs bättre förståelse för det dynamiska beteendet av KL-trä för framtida användning. Datorsimuleringar för bjälklag av KL-trä kan dock vara tidskrävande och ibland försvåras arbetet av mängden detaljer som behöver modelleras. Att utvärdera möjligheten att använda alternativa modeller som ger snabbare analyser är viktigt för det framtida användandet av KL-trä i byggandet.
Please use this url to cite or link to this publication:
author
Skoglund, Jacob LU
supervisor
organization
course
VSMM01 20201
year
type
H3 - Professional qualifications (4 Years - )
subject
keywords
CLT, dynamic engineering, engineering, Cross laminated timber, CLT Panels, dynamic response, Timber, CLT floors, Wood, Dynamic behavior, steady state analysis, steady-state
publication/series
TVSM-5000
report number
TVSM-5244
ISSN
0281-6679
language
English
id
9022988
alternative location
http://www.byggmek.lth.se/fileadmin/byggnadsmekanik/publications/tvsm5000/web5244.pdf
date added to LUP
2020-06-29 12:57:40
date last changed
2020-06-29 12:57:40
@misc{9022988,
  abstract     = {{The deregulation of timber for use in large scale constructions has seen the addition of new innovative timber-based products to a category of products referred to as engineered wood products. A now well established addition to these products is cross laminated timber, or CLT for short. CLT products use a form of orthogonal layering, where several parallel wooden boards are arranged in a number of layers, each layer being orthogonal to the previous. The use of orthogonal layering allows for increased stiffness in the two plane directions, resulting in a lightweight construction product with high load bearing capacity and stiffness.

To evaluate the dynamic behaviour of structures, engineers commonly apply the finite element method, where a system of equations are solved numerically. Given a sufficient amount of computational power and time, the finite element method can help to solve most dynamical problems. For sufficiently large or complex structures the amount of resources needed may be outside the scope of possibility or feasibility for many. Therefore, evaluating the usage of certain design simplifications, such as omitting to models aspects of the geometry, or alternative forms of analysis for CLT panels may help to reduce the time and resources required for an analysis.

In this Master's dissertation, a seven-layer CLT-panel has been created. In the model, each individual board and the gaps between the boards are modelled. The seven-layer model is used as a reference to evaluate the possibility of using less detailed alternative models. The alternative models are created as a layered 3D model and a composite 2D model, both models omit the modelling of the individual laminations, resulting in the layers being solid.

The results show small errors for the alternative models when using modal analysis. Concluding that the modal behaviour and dynamic response of a CLT panel can be evaluated using a composite 2D model or a less-detailed layered 3D model. This significantly reduces the amount of time and computational power needed for an analysis, and clearly indicates the benefit of using alternative less detailed models.}},
  author       = {{Skoglund, Jacob}},
  issn         = {{0281-6679}},
  language     = {{eng}},
  note         = {{Student Paper}},
  series       = {{TVSM-5000}},
  title        = {{DYNAMIC RESPONSE OF CROSS LAMINATED TIMBER FLOORS SUBJECT TO INTERNAL LOADS}},
  year         = {{2020}},
}