Skip to main content

LUP Student Papers

LUND UNIVERSITY LIBRARIES

Klimatberäkning i små- och medelstora företag

Taheri, Armin LU and Terje Stiefler, Isak LU (2023) In TVIT-5000 ABKM01 20231
Division of Building Services
Abstract (Swedish)
Bygg- och fastighetssektorn stod år 2020 för 21% av Sveriges totala utsläpp av växthusgaser (Boverket, 2023a). För att synliggöra och därigenom minska klimatpåverkan vid uppförandet av nya byggnader blev det den 1 januari 2022 obligatoriskt att genomföra klimatdeklaration av nya byggnader som kräver bygglov, med vissa undantag (Boverket, 2021a). Klimatdeklarationen ska redovisa klimatpåverkan från byggskedet, där klimatpåverkan anges som kg CO_2 e/m^2 BTA. Klimatpåverkan beräknas genom en så kallad klimatberäkning, vilket är nytt för hela branschen. Detta kan vara en utmaning för framför allt små- och medelstora företag (SMF). Den svenska byggbranschens omsättning och personalstyrka utgörs till 80% av små och medelstora företag.

I... (More)
Bygg- och fastighetssektorn stod år 2020 för 21% av Sveriges totala utsläpp av växthusgaser (Boverket, 2023a). För att synliggöra och därigenom minska klimatpåverkan vid uppförandet av nya byggnader blev det den 1 januari 2022 obligatoriskt att genomföra klimatdeklaration av nya byggnader som kräver bygglov, med vissa undantag (Boverket, 2021a). Klimatdeklarationen ska redovisa klimatpåverkan från byggskedet, där klimatpåverkan anges som kg CO_2 e/m^2 BTA. Klimatpåverkan beräknas genom en så kallad klimatberäkning, vilket är nytt för hela branschen. Detta kan vara en utmaning för framför allt små- och medelstora företag (SMF). Den svenska byggbranschens omsättning och personalstyrka utgörs till 80% av små och medelstora företag.

I syfte att utbilda SMF till att genomföra klimatberäkningar har IVL startat ett projekt som heter Kunskapslyftet (IVL, 2023). Projektet består av två skeden; en utbildning som ger teoretisk kunskap om klimatberäkning och klimatdeklaration av byggnader, och ett andra steg där man får möjligheten att använda IVL:s klimatberäkningsverktyg, Byggsektorns miljöberäkningsverktyg (BM), i syfte att upprätta en klimatberäkning med stöd av kompetent personal från IVL. Det övergripande målet är att kunskapshöjning kan leda till lägre klimatpåverkan för nya byggnader genom att de i studien involverade företagen får en större insyn i en byggnads klimatpåverkan och vad de kan göra för att minska klimatpåverkan. Kunskapslyftet syftar till att medvetandegöra SMFs roll i klimatomställningen, det är därför av intresse att närmare undersöka de i Kunskapslyftet deltagande SMFs förhållande till klimatberäkningar och ta del av deras uppfattning om lag om klimatdeklaration. Denna studie avser därför att undersöka hur små och medelstora företag uppfattar processen att genomföra klimatberäkningar.

Examensarbetet har utgått från både kvalitativa och kvantitativa datainsamlingsmetoder. Studien inleddes med en litteraturstudie med syfte att samla in information om ämnet och analysera resultat från tidigare studier inom området. Därefter har två utbildningstillfällen, de beskrivna i stycket ovan, observerats i syfte att ta del av vilken information testpiloterna erhållit i Kunskapslyftet. Intervju av testpiloter som antagits till Kunskapslyftet, en representant från branschorganisationen Byggföretagen och två experter på IVL som agerat handledare för testpiloter har genomförts. Parallellt med intervjuer har workshops, där antagna testpiloter deltagit, observerats i syfte att ta del av deras process för genomförandet av en klimatberäkning. För att nå en bredare och mer representativ testgrupp genomfördes även enkäter. Två enkäter, vilka både upprättats och skickats ut av IVL, kompletterades med varsin fråga. Resultatet från enkäterna har endast beaktat det från de kompletterande frågorna.

Studiens resultat visar att testpiloternas övergripande process för genomförandet av en klimatberäkning är likartad oberoende av kalkyl- och loggboksverktyg men att det för respektive testpilots process finns varierande inslag. De undersökta SMF i studien visar att det finns utmaningar för de som inte genomfört klimatberäkningar tidigare. De mest frekvent upptagna utmaningarna kan sammanfattas till kalkylfilens utformning (indata till klimatberäkningen), mappning av resurser, bristande informationsutbyte mellan leverantörer och entreprenörer samt teoretisk förståelse. De upptagna utmaningarna har generellt en låg tröskel, det vill säga att utmaningarna överkoms med enkla medel.
Det finns i Byggsektorns miljöberäkningsverktyg förbättringspunkter avseende funktioner såsom möjlighet till duplicering av en rad samt ett utökat register av tillgängliga EPD:er. Gällande inställningen till lag om klimatdeklaration råder en positiv inställning till både införandet och utvecklingen av densamma. Vidare visar studien att lag om klimatdeklaration har lett till att SMF fått en ökad insyn i en byggnads klimatpåverkan och därtill börjat överväga materialval i syfte att minska klimatpåverkan. (Less)
Abstract
The construction and real estate sector accounted for 21 % of Sweden’s total green-house gas emissions in 2020. To mitigate the impact of new buildings, the Swedish government introduced a new law on climate declaration for new buildings called “lag om klimatdeklaration”. The law requires most new buildings, which already re-quired building permits, to perform a climate declaration. The climate declaration should indicate the climate impact from the construction phase in kg CO2e/m2 gross floor area, calculated through a climate calculation.

Calculating the climate impact is new for the whole building industry and possibly, especially small, and medium-sized enterprises (SMEs) in the industry could benefit from an introduction and... (More)
The construction and real estate sector accounted for 21 % of Sweden’s total green-house gas emissions in 2020. To mitigate the impact of new buildings, the Swedish government introduced a new law on climate declaration for new buildings called “lag om klimatdeklaration”. The law requires most new buildings, which already re-quired building permits, to perform a climate declaration. The climate declaration should indicate the climate impact from the construction phase in kg CO2e/m2 gross floor area, calculated through a climate calculation.

Calculating the climate impact is new for the whole building industry and possibly, especially small, and medium-sized enterprises (SMEs) in the industry could benefit from an introduction and information about this field and how calculations can be made. To address this, IVL launched “Kunskapslyftet”, a project to educate SMEs regarding the law of climate declaration as well as to guide them through their own climate calculation. The overall aim is that increased knowledge will lead to de-creased climate impacts for new buildings by enlighten the SMEs of their role in the climate transition. It is therefore of interest to examine how the participating SMEs experience the process of carrying out climate calculations and their perceptions of the law. This study intends to explore this by applying different qualitative and quan-titative methods which included both interviews with the participating SMEs and survey-questions.

The study found that the overall process of conducting a climate calculation was similar among the interviewed test pilots. However, SMEs, that haven´t performed climate calculations before, encountered challenges related to designing the calcula-tion file, mapping resources, exchanging information between suppliers and contrac-tors, and understanding theoretical concepts. The challenges have a general low threshold, meaning that the challenges were overcome with simple means. The study also identified areas for improvement in the climate calculation tool. There was, however, an overall positive attitude towards the implementation and development of the law of climate declaration, which enabled SMEs to gain better insights into a building’s climate impact. (Less)
Please use this url to cite or link to this publication:
author
Taheri, Armin LU and Terje Stiefler, Isak LU
supervisor
organization
alternative title
Climate calculation in small and medium-sized enterprises
course
ABKM01 20231
year
type
H2 - Master's Degree (Two Years)
subject
keywords
Små- och medelstora företag, SMF, klimatberäkning, klimat-deklaration, Byggsektorns miljöberäkningsverktyg, mappning, EPD (Miljövarudeklaration), LCA
publication/series
TVIT-5000
report number
TVIT-5094
other publication id
ISRN LUTVDG/TVIT—23/5094-99
language
Swedish
additional info
Examinator: Rikard Sundling
id
9119247
date added to LUP
2023-06-23 09:57:45
date last changed
2023-06-23 09:57:45
@misc{9119247,
  abstract     = {{The construction and real estate sector accounted for 21 % of Sweden’s total green-house gas emissions in 2020. To mitigate the impact of new buildings, the Swedish government introduced a new law on climate declaration for new buildings called “lag om klimatdeklaration”. The law requires most new buildings, which already re-quired building permits, to perform a climate declaration. The climate declaration should indicate the climate impact from the construction phase in kg CO2e/m2 gross floor area, calculated through a climate calculation.

Calculating the climate impact is new for the whole building industry and possibly, especially small, and medium-sized enterprises (SMEs) in the industry could benefit from an introduction and information about this field and how calculations can be made. To address this, IVL launched “Kunskapslyftet”, a project to educate SMEs regarding the law of climate declaration as well as to guide them through their own climate calculation. The overall aim is that increased knowledge will lead to de-creased climate impacts for new buildings by enlighten the SMEs of their role in the climate transition. It is therefore of interest to examine how the participating SMEs experience the process of carrying out climate calculations and their perceptions of the law. This study intends to explore this by applying different qualitative and quan-titative methods which included both interviews with the participating SMEs and survey-questions.

The study found that the overall process of conducting a climate calculation was similar among the interviewed test pilots. However, SMEs, that haven´t performed climate calculations before, encountered challenges related to designing the calcula-tion file, mapping resources, exchanging information between suppliers and contrac-tors, and understanding theoretical concepts. The challenges have a general low threshold, meaning that the challenges were overcome with simple means. The study also identified areas for improvement in the climate calculation tool. There was, however, an overall positive attitude towards the implementation and development of the law of climate declaration, which enabled SMEs to gain better insights into a building’s climate impact.}},
  author       = {{Taheri, Armin and Terje Stiefler, Isak}},
  language     = {{swe}},
  note         = {{Student Paper}},
  series       = {{TVIT-5000}},
  title        = {{Klimatberäkning i små- och medelstora företag}},
  year         = {{2023}},
}