Advanced

Improvement in Time-domain IP Data Quality with Multi-electrode Systems by Separating Current and Potential Cables

Dahlin, Torleif LU and Leroux, Virginie LU (2011) Near Surface 2011 - the 17th European Meeting of Environmental and Engineering Geophysics p.01-01
Abstract
Good quality time-domain IP data can be obtained using multi-electrode resistivity-IP equipment and standard electrode cable layouts at sites with favourable electrode contact. High contact resistances often result in low signal levels and capacitive coupling problems making the IP signals drown in noise. We tested an approach for measuring with separated cable spreads for current transmission and potential measurement with an instrument with transmitter, receiver and relay switch housed in the same box. Stainless electrodes and standard non-shielded multi-electrode cables with were used throughout. Data quality assessment was done via pseudosections, IP decay curves and full waveform plots. The results show that it is possible to improve... (More)
Good quality time-domain IP data can be obtained using multi-electrode resistivity-IP equipment and standard electrode cable layouts at sites with favourable electrode contact. High contact resistances often result in low signal levels and capacitive coupling problems making the IP signals drown in noise. We tested an approach for measuring with separated cable spreads for current transmission and potential measurement with an instrument with transmitter, receiver and relay switch housed in the same box. Stainless electrodes and standard non-shielded multi-electrode cables with were used throughout. Data quality assessment was done via pseudosections, IP decay curves and full waveform plots. The results show that it is possible to improve the IP data quality at a site with unfavourable electrode grounding conditions. The results suggest that most of the coupling problems arise in the multi-core electrode cables, and that the problems can be reduced dramatically by separating the cable spreads for transmitting current and measuring potentials. The procedure used is relatively simple and applicable for current field measurements. Inversion of the recorded data results in low residuals and produces models that fit well with the geology at the site, although more detailed information would be needed to fully explain the observed phenomena. ... (Less)
Please use this url to cite or link to this publication:
author
organization
publishing date
type
Contribution to conference
publication status
published
subject
pages
01 - 01
conference name
Near Surface 2011 - the 17th European Meeting of Environmental and Engineering Geophysics
external identifiers
  • Scopus:84897554712
language
English
LU publication?
yes
id
62f8b945-b726-43b6-8cce-3c1aa9af8872 (old id 2344629)
date added to LUP
2012-02-27 12:07:08
date last changed
2016-10-13 05:01:35
@misc{62f8b945-b726-43b6-8cce-3c1aa9af8872,
  abstract     = {Good quality time-domain IP data can be obtained using multi-electrode resistivity-IP equipment and standard electrode cable layouts at sites with favourable electrode contact. High contact resistances often result in low signal levels and capacitive coupling problems making the IP signals drown in noise. We tested an approach for measuring with separated cable spreads for current transmission and potential measurement with an instrument with transmitter, receiver and relay switch housed in the same box. Stainless electrodes and standard non-shielded multi-electrode cables with were used throughout. Data quality assessment was done via pseudosections, IP decay curves and full waveform plots. The results show that it is possible to improve the IP data quality at a site with unfavourable electrode grounding conditions. The results suggest that most of the coupling problems arise in the multi-core electrode cables, and that the problems can be reduced dramatically by separating the cable spreads for transmitting current and measuring potentials. The procedure used is relatively simple and applicable for current field measurements. Inversion of the recorded data results in low residuals and produces models that fit well with the geology at the site, although more detailed information would be needed to fully explain the observed phenomena. ...},
  author       = {Dahlin, Torleif and Leroux, Virginie},
  language     = {eng},
  pages        = {01--01},
  title        = {Improvement in Time-domain IP Data Quality with Multi-electrode Systems by Separating Current and Potential Cables},
  year         = {2011},
}