Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

An analysis of pool boiling heat transfer on nanoparticle-coated surfaces

Cao, Zhen LU ; Wu, Zan LU ; Abdul Fattah Abood, Sahar LU and Sundén, Bengt LU (2019) In Energy Procedia 159. p.5880-5887
Abstract
In the present study, copper surfaces were deposited with Cu-Zinc nanoparticles of 0.6 mg by an electrophoretic deposition method (EPD). Two deposition patterns were designed, i.e., fully deposition (EPD-F) and channel-pattern deposition (EPD-C). In the channel-pattern deposition, the smooth channel and the deposition channel occur alternatively, by keeping the width of the smooth channel as 3 mm, but the width of the deposition channel as 1 mm (EPD-C1) and 3 mm (EPD-C2), respectively. Pool boiling of HFE-7200 was studied on a smooth surface and the nanoparticle-coating surfaces. The results showed that the surface with fully deposition (EPD-F) had the highest heat transfer coefficient, around 100% enhancement compared with the smooth... (More)
In the present study, copper surfaces were deposited with Cu-Zinc nanoparticles of 0.6 mg by an electrophoretic deposition method (EPD). Two deposition patterns were designed, i.e., fully deposition (EPD-F) and channel-pattern deposition (EPD-C). In the channel-pattern deposition, the smooth channel and the deposition channel occur alternatively, by keeping the width of the smooth channel as 3 mm, but the width of the deposition channel as 1 mm (EPD-C1) and 3 mm (EPD-C2), respectively. Pool boiling of HFE-7200 was studied on a smooth surface and the nanoparticle-coating surfaces. The results showed that the surface with fully deposition (EPD-F) had the highest heat transfer coefficient, around 100% enhancement compared with the smooth surface, while the surface with channel-pattern deposition (EPD-C2) had the highest critical heat flux, around 33.3% enhancement in comparison to the smooth surface. A high speed camera was used to study bubble dynamics, which indicated that the nanoparticle-coating surfaces had smaller bubble departure diameters and higher departure frequencies. A heat transfer model, considering natural convection, re-formation of thermal boundary layer and microlayer evaporation, was formulated to predict the heat transfer on the test surfaces, showing good prediction at low and moderate heat fluxes. CHF was analyzed from the perspective of the Rayleigh-Taylor instability.

(Less)
Please use this url to cite or link to this publication:
author
; ; and
organization
publishing date
type
Contribution to journal
publication status
published
subject
keywords
pool boiling, Heat transer, Nanoparticles, Bubble dynamics
in
Energy Procedia
volume
159
pages
7 pages
publisher
Elsevier
external identifiers
  • scopus:85063917927
ISSN
1876-6102
DOI
10.1016/j.egypro.2019.01.537
language
English
LU publication?
yes
id
1b32219d-b9a6-4b08-b85d-9b3acfabca40
date added to LUP
2018-09-17 10:24:12
date last changed
2023-11-18 18:06:52
@article{1b32219d-b9a6-4b08-b85d-9b3acfabca40,
  abstract     = {{In the present study, copper surfaces were deposited with Cu-Zinc nanoparticles of 0.6 mg by an electrophoretic deposition method (EPD). Two deposition patterns were designed, i.e., fully deposition (EPD-F) and channel-pattern deposition (EPD-C). In the channel-pattern deposition, the smooth channel and the deposition channel occur alternatively, by keeping the width of the smooth channel as 3 mm, but the width of the deposition channel as 1 mm (EPD-C1) and 3 mm (EPD-C2), respectively. Pool boiling of HFE-7200 was studied on a smooth surface and the nanoparticle-coating surfaces. The results showed that the surface with fully deposition (EPD-F) had the highest heat transfer coefficient, around 100% enhancement compared with the smooth surface, while the surface with channel-pattern deposition (EPD-C2) had the highest critical heat flux, around 33.3% enhancement in comparison to the smooth surface. A high speed camera was used to study bubble dynamics, which indicated that the nanoparticle-coating surfaces had smaller bubble departure diameters and higher departure frequencies. A heat transfer model, considering natural convection, re-formation of thermal boundary layer and microlayer evaporation, was formulated to predict the heat transfer on the test surfaces, showing good prediction at low and moderate heat fluxes. CHF was analyzed from the perspective of the Rayleigh-Taylor instability.<br/><br/>}},
  author       = {{Cao, Zhen and Wu, Zan and Abdul Fattah Abood, Sahar and Sundén, Bengt}},
  issn         = {{1876-6102}},
  keywords     = {{pool boiling; Heat transer; Nanoparticles; Bubble dynamics}},
  language     = {{eng}},
  pages        = {{5880--5887}},
  publisher    = {{Elsevier}},
  series       = {{Energy Procedia}},
  title        = {{An analysis of pool boiling heat transfer on nanoparticle-coated surfaces}},
  url          = {{http://dx.doi.org/10.1016/j.egypro.2019.01.537}},
  doi          = {{10.1016/j.egypro.2019.01.537}},
  volume       = {{159}},
  year         = {{2019}},
}