Optimization of melting performance of a heat storage tank under rotation conditions : Based on taguchi design and response surface method
(2023) In Energy 271.- Abstract
The melting performance of a rotating triplex-tube latent heat thermal energy storage unit is studied by numerical simulation method. The Taguchi design and response surface method are applied to its optimized design. Firstly, the Taguchi design method is used to quantitatively reveal the specific effects of fin distribution, fin number, and fin material on the melting performance of the unit. Compared with all-inner tube-fin or all-outer tube-fin structures, the melting time of alternating inside and outside fin structures is shortened by 52.64% and 32.42%, the average heat absorption rate is greatly increased by 105.56% and 47.26%, and the total heat is reduced by 2.64% and 2.17%, respectively. Then, the response surface method is... (More)
The melting performance of a rotating triplex-tube latent heat thermal energy storage unit is studied by numerical simulation method. The Taguchi design and response surface method are applied to its optimized design. Firstly, the Taguchi design method is used to quantitatively reveal the specific effects of fin distribution, fin number, and fin material on the melting performance of the unit. Compared with all-inner tube-fin or all-outer tube-fin structures, the melting time of alternating inside and outside fin structures is shortened by 52.64% and 32.42%, the average heat absorption rate is greatly increased by 105.56% and 47.26%, and the total heat is reduced by 2.64% and 2.17%, respectively. Then, the response surface method is applied to the eight alternating fins obtained by the Taguchi design, and the effects of fin length, width, and rotation angle on the melting time and average heat absorption rate of the unit are studied. Compared with the original structure, the optimal structure reduces the total melting time by 7.37% and increases the average heat absorption rate by 7.23%. The geometric parameters’ interaction with the relevant target response is studied, and the corresponding fluid-structure interaction equation is fitted. Finally, the melt growth phenomenon near the wall is found in the initial melting stage of the optimized model by mechanism analysis.
(Less)
- author
- Huang, Xinyu ; Li, Fangfei ; Li, Yuanji ; Meng, Xiangzhao ; Yang, Xiaohu and Sundén, Bengt LU
- organization
- publishing date
- 2023-05-15
- type
- Contribution to journal
- publication status
- published
- subject
- keywords
- Design and optimization, Latent heat energy storage, Melting performance, Rotation conditions
- in
- Energy
- volume
- 271
- article number
- 127100
- publisher
- Elsevier
- external identifiers
-
- scopus:85149387617
- ISSN
- 0360-5442
- DOI
- 10.1016/j.energy.2023.127100
- language
- English
- LU publication?
- yes
- additional info
- Publisher Copyright: © 2023 Elsevier Ltd
- id
- 1efe2d1d-caff-4713-8dee-2aa6d46df744
- date added to LUP
- 2024-01-12 14:02:16
- date last changed
- 2024-01-12 14:03:55
@article{1efe2d1d-caff-4713-8dee-2aa6d46df744,
abstract = {{<p>The melting performance of a rotating triplex-tube latent heat thermal energy storage unit is studied by numerical simulation method. The Taguchi design and response surface method are applied to its optimized design. Firstly, the Taguchi design method is used to quantitatively reveal the specific effects of fin distribution, fin number, and fin material on the melting performance of the unit. Compared with all-inner tube-fin or all-outer tube-fin structures, the melting time of alternating inside and outside fin structures is shortened by 52.64% and 32.42%, the average heat absorption rate is greatly increased by 105.56% and 47.26%, and the total heat is reduced by 2.64% and 2.17%, respectively. Then, the response surface method is applied to the eight alternating fins obtained by the Taguchi design, and the effects of fin length, width, and rotation angle on the melting time and average heat absorption rate of the unit are studied. Compared with the original structure, the optimal structure reduces the total melting time by 7.37% and increases the average heat absorption rate by 7.23%. The geometric parameters’ interaction with the relevant target response is studied, and the corresponding fluid-structure interaction equation is fitted. Finally, the melt growth phenomenon near the wall is found in the initial melting stage of the optimized model by mechanism analysis.</p>}},
author = {{Huang, Xinyu and Li, Fangfei and Li, Yuanji and Meng, Xiangzhao and Yang, Xiaohu and Sundén, Bengt}},
issn = {{0360-5442}},
keywords = {{Design and optimization; Latent heat energy storage; Melting performance; Rotation conditions}},
language = {{eng}},
month = {{05}},
publisher = {{Elsevier}},
series = {{Energy}},
title = {{Optimization of melting performance of a heat storage tank under rotation conditions : Based on taguchi design and response surface method}},
url = {{http://dx.doi.org/10.1016/j.energy.2023.127100}},
doi = {{10.1016/j.energy.2023.127100}},
volume = {{271}},
year = {{2023}},
}