Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I : Mechanical properties and deformation textures

Orlov, Dmitry LU orcid ; Pougis, Arnaud ; Lapovok, Rimma ; Toth, Laszlo S. ; Timokhina, Ilana B. ; Hodgson, Peter D. ; Haldar, Arunansu and Bhattacharjee, Debashish (2013) In Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science 44(9). p.4346-4359
Abstract

IF steel sheets were processed by conventional symmetric and asymmetric rolling (ASR) at ambient temperature. The asymmetry was introduced in a geometric way using differential roll diameters with a number of different ratios. The material strength was measured by tensile testing and the microstructure was analyzed by optical and transmission electron microscopy as well as electron backscatter diffraction (EBSD) analysis. Texture was also successfully measured by EBSD using large surface areas. Finite element (FE) simulations were carried out for multiple passes to obtain the strain distribution after rolling. From the FE results, the velocity gradient along selected flow lines was extracted and the evolution of the texture was... (More)

IF steel sheets were processed by conventional symmetric and asymmetric rolling (ASR) at ambient temperature. The asymmetry was introduced in a geometric way using differential roll diameters with a number of different ratios. The material strength was measured by tensile testing and the microstructure was analyzed by optical and transmission electron microscopy as well as electron backscatter diffraction (EBSD) analysis. Texture was also successfully measured by EBSD using large surface areas. Finite element (FE) simulations were carried out for multiple passes to obtain the strain distribution after rolling. From the FE results, the velocity gradient along selected flow lines was extracted and the evolution of the texture was simulated using polycrystal plasticity modeling. The best mechanical properties were obtained after ASR using a roll diameter ratio of 2. The textures appeared to be tilted up to 12 deg around the transverse direction, which were simulated with the FE-combined polycrystal plasticity modeling in good agreement with measurements. The simulation work revealed that the shear component introduced by ASR was about the same magnitude as the normal component of the rolling strain tensor.

(Less)
Please use this url to cite or link to this publication:
author
; ; ; ; ; ; and
publishing date
type
Contribution to journal
publication status
published
subject
in
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science
volume
44
issue
9
pages
14 pages
publisher
Springer
external identifiers
  • scopus:84881086738
ISSN
1073-5623
DOI
10.1007/s11661-013-1791-y
language
English
LU publication?
no
id
c9b0cab2-f001-4c70-ae59-e4387cfc0c48
date added to LUP
2016-06-20 15:34:45
date last changed
2022-03-16 06:39:13
@article{c9b0cab2-f001-4c70-ae59-e4387cfc0c48,
  abstract     = {{<p>IF steel sheets were processed by conventional symmetric and asymmetric rolling (ASR) at ambient temperature. The asymmetry was introduced in a geometric way using differential roll diameters with a number of different ratios. The material strength was measured by tensile testing and the microstructure was analyzed by optical and transmission electron microscopy as well as electron backscatter diffraction (EBSD) analysis. Texture was also successfully measured by EBSD using large surface areas. Finite element (FE) simulations were carried out for multiple passes to obtain the strain distribution after rolling. From the FE results, the velocity gradient along selected flow lines was extracted and the evolution of the texture was simulated using polycrystal plasticity modeling. The best mechanical properties were obtained after ASR using a roll diameter ratio of 2. The textures appeared to be tilted up to 12 deg around the transverse direction, which were simulated with the FE-combined polycrystal plasticity modeling in good agreement with measurements. The simulation work revealed that the shear component introduced by ASR was about the same magnitude as the normal component of the rolling strain tensor.</p>}},
  author       = {{Orlov, Dmitry and Pougis, Arnaud and Lapovok, Rimma and Toth, Laszlo S. and Timokhina, Ilana B. and Hodgson, Peter D. and Haldar, Arunansu and Bhattacharjee, Debashish}},
  issn         = {{1073-5623}},
  language     = {{eng}},
  number       = {{9}},
  pages        = {{4346--4359}},
  publisher    = {{Springer}},
  series       = {{Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science}},
  title        = {{Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I : Mechanical properties and deformation textures}},
  url          = {{http://dx.doi.org/10.1007/s11661-013-1791-y}},
  doi          = {{10.1007/s11661-013-1791-y}},
  volume       = {{44}},
  year         = {{2013}},
}