Advanced

Hygroscopic properties of aerosol particles in the northeastern Atlantic during ACE-2

Swietlicki, Erik LU ; Zhou, Jingchuan LU ; Covert, David S. ; Hämeri, Kaarle ; Busch, Bernhard ; Väkeva, Minna ; Dusek, Ulrike ; Berg, Olle H. ; Wiedensohler, Alfred and Aalto, Pasi , et al. (2000) In Tellus, Series B: Chemical and Physical Meteorology 52(2). p.201-227
Abstract

Measurements of the hygroscopic properties of sub-micrometer atmospheric aerosol particles were performed with hygroscopic tandem differential mobility analysers (H-TDMA) at 5 sites in the subtropical north-eastern Atlantic during the second Aerosol Characterization Experiment (ACE-2) from 16 June to 25 July 1997. Four of the sites were in the marine boundary layer and one was, at least occasionally, in the lower free troposphere. The hygroscopic diameter growth factors of individual aerosol particles in the dry particle diameter range 10-440 nm were generally measured for changes in relative humidity (RH) from <10% to 90%. In the marine boundary layer, growth factors at 90% RH were dependent on location, air mass type and particle... (More)

Measurements of the hygroscopic properties of sub-micrometer atmospheric aerosol particles were performed with hygroscopic tandem differential mobility analysers (H-TDMA) at 5 sites in the subtropical north-eastern Atlantic during the second Aerosol Characterization Experiment (ACE-2) from 16 June to 25 July 1997. Four of the sites were in the marine boundary layer and one was, at least occasionally, in the lower free troposphere. The hygroscopic diameter growth factors of individual aerosol particles in the dry particle diameter range 10-440 nm were generally measured for changes in relative humidity (RH) from <10% to 90%. In the marine boundary layer, growth factors at 90% RH were dependent on location, air mass type and particle size. The data was dominated by a unimodal growth distribution of more-hygroscopic particles, although a bimodal growth distribution including less-hygroscopic particles was observed at times, most often in the more polluted air masses. In clean marine air masses the more-hygroscopic growth factors ranged from about 1.6 to 1.8 with a consistent increase in growth factor with increasing particle size. There was also a tendency toward higher growth factors as sodium to sulphate molar ratio increased with increasing sea-salt contribution at higher wind speeds. During outbreaks of European pollution in the ACE-2 region, the growth factors of the largest particles were reduced, but only slightly. Growth factors at all sizes in both clean and polluted air masses were markedly lower at the Sagres, Portugal site due to more proximate continental influences. The frequency of occurrence of less-hygroscopic particles with a growth factor of ca. 1.15 was greatest during polluted conditions at Sagres. The free tropospheric 50 nm particles were predominately less-hygroscopic, with an intermediate growth factor of 1.4, but more-hygroscopic particles with growth factors of about 1.6 were also frequent. While these particles probably originate from within the marine boundary layer, the less-hygroscopic particles are probably more characteristic of lower free tropospheric air masses. For those occasions when measurements were made at 90% and an intermediate 60% or 70% RH, the growth factor G(RH) of the more-hygroscopic particles could be modelled empirically by a power law expression. For the ubiquitous more-hygroscopic particles, the expressions G(RH) = (1 - RH/100)-0.210 for 50 nm Aitken mode particles and G(RH) = (1 - RH/100)-0.233 for 166 nm accumulation mode particles are recommended for clean marine air masses in the north-eastern Atlantic within the range 0 < RH < 95%, and for wind speeds for which the local sea-salt production is small (< ca. 8 m s-1).

(Less)
Please use this url to cite or link to this publication:
author
, et al. (More)
(Less)
organization
publishing date
type
Contribution to journal
publication status
published
subject
in
Tellus, Series B: Chemical and Physical Meteorology
volume
52
issue
2
pages
27 pages
publisher
Taylor & Francis
external identifiers
  • scopus:0034074207
ISSN
0280-6509
DOI
10.3402/tellusb.v52i2.16093
language
English
LU publication?
yes
id
de91d38e-b2be-4a45-b6ee-178862898097
date added to LUP
2019-05-16 09:06:25
date last changed
2019-11-27 03:11:42
@article{de91d38e-b2be-4a45-b6ee-178862898097,
  abstract     = {<p>Measurements of the hygroscopic properties of sub-micrometer atmospheric aerosol particles were performed with hygroscopic tandem differential mobility analysers (H-TDMA) at 5 sites in the subtropical north-eastern Atlantic during the second Aerosol Characterization Experiment (ACE-2) from 16 June to 25 July 1997. Four of the sites were in the marine boundary layer and one was, at least occasionally, in the lower free troposphere. The hygroscopic diameter growth factors of individual aerosol particles in the dry particle diameter range 10-440 nm were generally measured for changes in relative humidity (RH) from &lt;10% to 90%. In the marine boundary layer, growth factors at 90% RH were dependent on location, air mass type and particle size. The data was dominated by a unimodal growth distribution of more-hygroscopic particles, although a bimodal growth distribution including less-hygroscopic particles was observed at times, most often in the more polluted air masses. In clean marine air masses the more-hygroscopic growth factors ranged from about 1.6 to 1.8 with a consistent increase in growth factor with increasing particle size. There was also a tendency toward higher growth factors as sodium to sulphate molar ratio increased with increasing sea-salt contribution at higher wind speeds. During outbreaks of European pollution in the ACE-2 region, the growth factors of the largest particles were reduced, but only slightly. Growth factors at all sizes in both clean and polluted air masses were markedly lower at the Sagres, Portugal site due to more proximate continental influences. The frequency of occurrence of less-hygroscopic particles with a growth factor of ca. 1.15 was greatest during polluted conditions at Sagres. The free tropospheric 50 nm particles were predominately less-hygroscopic, with an intermediate growth factor of 1.4, but more-hygroscopic particles with growth factors of about 1.6 were also frequent. While these particles probably originate from within the marine boundary layer, the less-hygroscopic particles are probably more characteristic of lower free tropospheric air masses. For those occasions when measurements were made at 90% and an intermediate 60% or 70% RH, the growth factor G(RH) of the more-hygroscopic particles could be modelled empirically by a power law expression. For the ubiquitous more-hygroscopic particles, the expressions G(RH) = (1 - RH/100)<sup>-0.210</sup> for 50 nm Aitken mode particles and G(RH) = (1 - RH/100)<sup>-0.233</sup> for 166 nm accumulation mode particles are recommended for clean marine air masses in the north-eastern Atlantic within the range 0 &lt; RH &lt; 95%, and for wind speeds for which the local sea-salt production is small (&lt; ca. 8 m s<sup>-1</sup>).</p>},
  author       = {Swietlicki, Erik and Zhou, Jingchuan and Covert, David S. and Hämeri, Kaarle and Busch, Bernhard and Väkeva, Minna and Dusek, Ulrike and Berg, Olle H. and Wiedensohler, Alfred and Aalto, Pasi and Mäkelä, Jyrki and Martinsson, Bengt G. and Papaspiropoulos, Giorgos and Mentes, Besim and Frank, Göran and Stratmann, Frank},
  issn         = {0280-6509},
  language     = {eng},
  number       = {2},
  pages        = {201--227},
  publisher    = {Taylor & Francis},
  series       = {Tellus, Series B: Chemical and Physical Meteorology},
  title        = {Hygroscopic properties of aerosol particles in the northeastern Atlantic during ACE-2},
  url          = {http://dx.doi.org/10.3402/tellusb.v52i2.16093},
  doi          = {10.3402/tellusb.v52i2.16093},
  volume       = {52},
  year         = {2000},
}