Skip to main content

LUP Student Papers

LUND UNIVERSITY LIBRARIES

Investigation of DROIC Architectures for High Operating Temperature MWIR Photodetectors

Ganesan, Sumith Kumar LU (2026) EITM02 20261
Department of Electrical and Information Technology
Abstract
High-operating-temperature (HOT) infrared photodetectors can reduce the depen
dence on cryogenic cooling in infrared imaging systems, but their operation at el
evated temperature introduces additional challenges for the associated readout in
tegrated circuit, including increased dark current and reduced detector impedance.
These challenges place additional requirements on the detector readout circuitry
and motivate the investigation carried out in this thesis. The work evaluates
and implements suitable components for a Digital Readout Integrated Circuit
(DROIC) signal chain intended to interface with a mid-wavelength infrared pho
todetector developed at Lund University and operating at 300 K.


Based on a literature study of... (More)
High-operating-temperature (HOT) infrared photodetectors can reduce the depen
dence on cryogenic cooling in infrared imaging systems, but their operation at el
evated temperature introduces additional challenges for the associated readout in
tegrated circuit, including increased dark current and reduced detector impedance.
These challenges place additional requirements on the detector readout circuitry
and motivate the investigation carried out in this thesis. The work evaluates
and implements suitable components for a Digital Readout Integrated Circuit
(DROIC) signal chain intended to interface with a mid-wavelength infrared pho
todetector developed at Lund University and operating at 300 K.


Based on a literature study of infrared readout architectures, a Capacitive
Transimpedance Amplifier (CTIA) was selected as the input integrator and a 12
bit hybrid SAR–SS ADC was adopted for analog-to-digital conversion. The CTIA
was implemented in 65 nm CMOS technology using a folded-cascode amplifier
in Cadence Virtuoso, while behavioural Verilog-A models were developed for the
ADC using Cadence Virtuoso and simulated using the Spectre simulator.


The implemented detector-to-digital signal chain was further evaluated to de
termine whether a 1 fA photocurrent variation remains distinguishable at the final
12-bit output and whether the signal acquisition and readout timing are compat
ible with a target frame period of 5 ms when the readout chain is extrapolated to
the intended 1024 × 1024 array under Integration-While-Readout operation. The
results demonstrate the functional feasibility of the investigated DROIC architec
ture and provide a basis for further circuit-level implementation and optimisation
towards a complete infrared focal-plane-array readout (Less)
Popular Abstract
Both ordinary cameras and infrared cameras form images of a scene, but they rely
on different kinds of information. Ordinary cameras record visible light, while in
frared cameras detect radiation associated with the temperature of objects. Since
every object above absolute zero emits infrared radiation, an infrared detector
receives thermal information from the entire scene in front of it. Thousands of
small detector elements work together, each producing a tiny electrical signal cor
responding to a small part of that scene. Forming a useful digital image therefore
depends on preserving the small differences between these signals as they are col
lected and processed.


Detecting these differences becomes more difficult when the... (More)
Both ordinary cameras and infrared cameras form images of a scene, but they rely
on different kinds of information. Ordinary cameras record visible light, while in
frared cameras detect radiation associated with the temperature of objects. Since
every object above absolute zero emits infrared radiation, an infrared detector
receives thermal information from the entire scene in front of it. Thousands of
small detector elements work together, each producing a tiny electrical signal cor
responding to a small part of that scene. Forming a useful digital image therefore
depends on preserving the small differences between these signals as they are col
lected and processed.


Detecting these differences becomes more difficult when the detector itself
produces unwanted electrical current and noise. For this reason, many high
performance infrared detectors are traditionally cooled to very low temperatures,
which helps suppress these effects but adds considerable size, complexity, and
power consumption to the imaging system. High Operating Temperature (HOT)
detectors aim to reduce this dependence on cryogenic cooling by operating at
higher temperatures. The detector considered in this thesis operates at 300 K,
but this advantage places greater demands on the readout electronics because in
creased dark current, detector noise and reduced detector impedance make the
small useful signal more difficult to preserve and convert accurately.


This creates an important question: what kind of electronics should be placed
between such a detector and the digital system that eventually forms the image?
This thesis investigates that intermediate electronic path, commonly referred to
as the readout circuit. Its role is to take the very small current generated by the
detector, convert it into a usable electrical signal, preserve the small differences
that contain the temperature information, and finally turn the signal into a digi
tal number. Several possible approaches for collecting and digitising the detector
signal were studied, after which suitable circuit blocks, including an analog integra
tor, a sampling circuit, and an ADC, were selected, implemented, and simulated
together as a representative detector-to-digital readout chain.


Why does this matter? Developing a new infrared detector is only part of the
challenge; suitable electronics are also needed to read the signals it produces. This
thesis provides an initial design basis for future readout implementations tailored
to the HOT detector investigated here. (Less)
Please use this url to cite or link to this publication:
author
Ganesan, Sumith Kumar LU
supervisor
organization
course
EITM02 20261
year
type
H2 - Master's Degree (Two Years)
subject
keywords
Digital Readout Integrated Circuit, Mid-Wavelength Infrared, High Operating Temperature Photodetectors, Capacitive Transimpedance Amplifier, Hybrid ADC, Successive Approximation ADC, Single-Slope ADC.
report number
LU/LTH-EIT 2026-1194
language
English
id
9251613
date added to LUP
2026-09-23 11:06:31
date last changed
2026-09-23 11:06:31
@misc{9251613,
  abstract     = {{High-operating-temperature (HOT) infrared photodetectors can reduce the depen
dence on cryogenic cooling in infrared imaging systems, but their operation at el
evated temperature introduces additional challenges for the associated readout in
tegrated circuit, including increased dark current and reduced detector impedance.
These challenges place additional requirements on the detector readout circuitry
and motivate the investigation carried out in this thesis. The work evaluates
and implements suitable components for a Digital Readout Integrated Circuit
(DROIC) signal chain intended to interface with a mid-wavelength infrared pho
todetector developed at Lund University and operating at 300 K.


Based on a literature study of infrared readout architectures, a Capacitive
Transimpedance Amplifier (CTIA) was selected as the input integrator and a 12
bit hybrid SAR–SS ADC was adopted for analog-to-digital conversion. The CTIA
was implemented in 65 nm CMOS technology using a folded-cascode amplifier
in Cadence Virtuoso, while behavioural Verilog-A models were developed for the
ADC using Cadence Virtuoso and simulated using the Spectre simulator.


The implemented detector-to-digital signal chain was further evaluated to de
termine whether a 1 fA photocurrent variation remains distinguishable at the final
12-bit output and whether the signal acquisition and readout timing are compat
ible with a target frame period of 5 ms when the readout chain is extrapolated to
the intended 1024 × 1024 array under Integration-While-Readout operation. The
results demonstrate the functional feasibility of the investigated DROIC architec
ture and provide a basis for further circuit-level implementation and optimisation
towards a complete infrared focal-plane-array readout}},
  author       = {{Ganesan, Sumith Kumar}},
  language     = {{eng}},
  note         = {{Student Paper}},
  title        = {{Investigation of DROIC Architectures for High Operating Temperature MWIR Photodetectors}},
  year         = {{2026}},
}