All-ceramic fixed partial dentures designed according to the DC-Zirkon (R) technique. A 2-year clinical study
(2005) In Journal of Oral Rehabilitation 32(3). p.180-187- Abstract
- The aim of the study was to investigate whether the properties of a pre-sintered, hot iso-static post-compacted ( HIP) ZrO2 are adequate for use in three-five-unit fixed partial dentures (FPDs) and to evaluate the clinical results. Twenty three five-unit FPDs were fabricated for 18 patients on a total of 56 abutments. They were all made on abutments cut with a shoulder preparation and cemented with a zinc phosphate cement. They were clinically followed for 24 months. After 24 months all FPDs were still in use without any fractures or clinical wear but in three cases (15%) minor chip-of fractures were observed. Marginal integrity was rated excellent at 45 abutments and acceptable at 11. Within the limitations of this 2-year clinical... (More)
- The aim of the study was to investigate whether the properties of a pre-sintered, hot iso-static post-compacted ( HIP) ZrO2 are adequate for use in three-five-unit fixed partial dentures (FPDs) and to evaluate the clinical results. Twenty three five-unit FPDs were fabricated for 18 patients on a total of 56 abutments. They were all made on abutments cut with a shoulder preparation and cemented with a zinc phosphate cement. They were clinically followed for 24 months. After 24 months all FPDs were still in use without any fractures or clinical wear but in three cases (15%) minor chip-of fractures were observed. Marginal integrity was rated excellent at 45 abutments and acceptable at 11. Within the limitations of this 2-year clinical follow-up study, FPDs made of pre-sintered HIP ZrO2 core material veneered with a compatible ceramic is an acceptable alternative in the fabrication of FPDs with the extensions investigated in this study. Special attention, however, must be paid to designing the core for an occlusal shape that provides sufficient support for the veneer. (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/253566
- author
- Vult von Steyern, Fredrik LU ; Carlson, P and Nilner, K
- organization
- publishing date
- 2005
- type
- Contribution to journal
- publication status
- published
- subject
- keywords
- dental porcelain, all ceramics, fixed partial dentures
- in
- Journal of Oral Rehabilitation
- volume
- 32
- issue
- 3
- pages
- 180 - 187
- publisher
- Wiley-Blackwell
- external identifiers
-
- wos:000226965100004
- scopus:14844364021
- pmid:15707428
- ISSN
- 0305-182X
- DOI
- 10.1111/j.1365-2842.2004.01437.x
- language
- English
- LU publication?
- yes
- additional info
- The information about affiliations in this record was updated in December 2015. The record was previously connected to the following departments: Faculty of Odontology (ceased) (LUR000034), Department of Orthopaedics (Lund) (013028000)
- id
- 38b58f97-c2e6-4cc3-813f-65df4ea6f3a3 (old id 253566)
- date added to LUP
- 2016-04-01 17:08:47
- date last changed
- 2022-03-22 23:39:11
@article{38b58f97-c2e6-4cc3-813f-65df4ea6f3a3, abstract = {{The aim of the study was to investigate whether the properties of a pre-sintered, hot iso-static post-compacted ( HIP) ZrO2 are adequate for use in three-five-unit fixed partial dentures (FPDs) and to evaluate the clinical results. Twenty three five-unit FPDs were fabricated for 18 patients on a total of 56 abutments. They were all made on abutments cut with a shoulder preparation and cemented with a zinc phosphate cement. They were clinically followed for 24 months. After 24 months all FPDs were still in use without any fractures or clinical wear but in three cases (15%) minor chip-of fractures were observed. Marginal integrity was rated excellent at 45 abutments and acceptable at 11. Within the limitations of this 2-year clinical follow-up study, FPDs made of pre-sintered HIP ZrO2 core material veneered with a compatible ceramic is an acceptable alternative in the fabrication of FPDs with the extensions investigated in this study. Special attention, however, must be paid to designing the core for an occlusal shape that provides sufficient support for the veneer.}}, author = {{Vult von Steyern, Fredrik and Carlson, P and Nilner, K}}, issn = {{0305-182X}}, keywords = {{dental porcelain; all ceramics; fixed partial dentures}}, language = {{eng}}, number = {{3}}, pages = {{180--187}}, publisher = {{Wiley-Blackwell}}, series = {{Journal of Oral Rehabilitation}}, title = {{All-ceramic fixed partial dentures designed according to the DC-Zirkon (R) technique. A 2-year clinical study}}, url = {{http://dx.doi.org/10.1111/j.1365-2842.2004.01437.x}}, doi = {{10.1111/j.1365-2842.2004.01437.x}}, volume = {{32}}, year = {{2005}}, }