Influence of physical properties of phases on hydrodynamics and mass transfer characteristics of a liquid-liquid circular microchannel
(2016) ASME 2016 Heat Transfer Summer Conference, HT 2016, collocated with the ASME 2016 Fluids Engineering Division Summer Meeting and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels- Abstract
The influences of operating conditions and physical properties of the two phases on the hydrodynamics and mass transfer in a circular liquid-liquid microchannel have been investigated. The polytetrafluoroethylene (PTFE) microchannel has an internal diameter of 0.7 mm and a T-shaped mixing junction. Sodium hydroxide solution was used as the aqueous phase. N-hexane and toluene were employed as the organic phases to investigate the effect of physical properties. Regarding the results, at constant total flow rate, raising the flow rate ratio enhanced the overall volumetric mass transfer coefficient. Using toluene as the organic solvent enhanced the overall volumetric mass transfer coefficient in average by 64.7% and 100.27% comparing to... (More)
The influences of operating conditions and physical properties of the two phases on the hydrodynamics and mass transfer in a circular liquid-liquid microchannel have been investigated. The polytetrafluoroethylene (PTFE) microchannel has an internal diameter of 0.7 mm and a T-shaped mixing junction. Sodium hydroxide solution was used as the aqueous phase. N-hexane and toluene were employed as the organic phases to investigate the effect of physical properties. Regarding the results, at constant total flow rate, raising the flow rate ratio enhanced the overall volumetric mass transfer coefficient. Using toluene as the organic solvent enhanced the overall volumetric mass transfer coefficient in average by 64.7% and 100.27% comparing to n-hexane-water at flow rate ratio of 1 and 0.5, respectively. This increment resulted in a decrement in the required mass transfer time and length in the microchannel. The length of the slugs had no considerable variation as n-hexane was replaced with toluene. Thus, the significant improvement of the overall volumetric mass transfer coefficient was because of the increment of the overall mass transfer coefficient, not the specific interfacial area.
(Less)
- author
- Sattari, Mehdi LU ; Sundén, Bengt LU ; Wu, Zan LU and Esfahany, Mohsen Nasr
- organization
- publishing date
- 2016
- type
- Chapter in Book/Report/Conference proceeding
- publication status
- published
- subject
- host publication
- ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2016, collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting
- article number
- 7954
- publisher
- American Society Of Mechanical Engineers (ASME)
- conference name
- ASME 2016 Heat Transfer Summer Conference, HT 2016, collocated with the ASME 2016 Fluids Engineering Division Summer Meeting and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels
- conference location
- Washington, United States
- conference dates
- 2016-07-10 - 2016-07-14
- external identifiers
-
- scopus:85001849005
- ISBN
- 9780791850343
- DOI
- 10.1115/ICNMM2016-7954
- language
- English
- LU publication?
- yes
- id
- 36da8a01-f55b-4d16-9836-ead171894784
- date added to LUP
- 2017-02-24 10:27:09
- date last changed
- 2022-04-24 22:10:55
@inproceedings{36da8a01-f55b-4d16-9836-ead171894784, abstract = {{<p>The influences of operating conditions and physical properties of the two phases on the hydrodynamics and mass transfer in a circular liquid-liquid microchannel have been investigated. The polytetrafluoroethylene (PTFE) microchannel has an internal diameter of 0.7 mm and a T-shaped mixing junction. Sodium hydroxide solution was used as the aqueous phase. N-hexane and toluene were employed as the organic phases to investigate the effect of physical properties. Regarding the results, at constant total flow rate, raising the flow rate ratio enhanced the overall volumetric mass transfer coefficient. Using toluene as the organic solvent enhanced the overall volumetric mass transfer coefficient in average by 64.7% and 100.27% comparing to n-hexane-water at flow rate ratio of 1 and 0.5, respectively. This increment resulted in a decrement in the required mass transfer time and length in the microchannel. The length of the slugs had no considerable variation as n-hexane was replaced with toluene. Thus, the significant improvement of the overall volumetric mass transfer coefficient was because of the increment of the overall mass transfer coefficient, not the specific interfacial area.</p>}}, author = {{Sattari, Mehdi and Sundén, Bengt and Wu, Zan and Esfahany, Mohsen Nasr}}, booktitle = {{ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2016, collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 Fluids Engineering Division Summer Meeting}}, isbn = {{9780791850343}}, language = {{eng}}, publisher = {{American Society Of Mechanical Engineers (ASME)}}, title = {{Influence of physical properties of phases on hydrodynamics and mass transfer characteristics of a liquid-liquid circular microchannel}}, url = {{http://dx.doi.org/10.1115/ICNMM2016-7954}}, doi = {{10.1115/ICNMM2016-7954}}, year = {{2016}}, }