Investigation of a Premixed Gas Turbine Combustor Central Body Burner Using OH Planar Laser Induced Fluorescence at Elevated Pressures
(2013) ASME Turbo Expo 2013: Turbine Technical Conference and Exposition Volume 1A: Combustion, Fuels and Emissions.- Abstract
- Experiments were performed on the central body rich-pilotlean
(RPL) burner of a Siemens Industrial Turbomachinary 4th
generation DLE combustor to observe the combustion changes
that may occur when using fuels other than natural gas. Measurements
were taken of temperatures at multiple points along
the RPL body while hydroxyl (OH) radical distribution extending
from the dump plane of the burner was imaged by planar
laser induced fluorescence (PLIF). The RPL burner was run using
four fuels; methane, a generic syngas (67.5% H2, 22.5% CO
and 10% CH4) and dilutions of these with nitrogen to a Wobbe
index of 15 MJ/m3. Each of the fuels was operated at... (More) - Experiments were performed on the central body rich-pilotlean
(RPL) burner of a Siemens Industrial Turbomachinary 4th
generation DLE combustor to observe the combustion changes
that may occur when using fuels other than natural gas. Measurements
were taken of temperatures at multiple points along
the RPL body while hydroxyl (OH) radical distribution extending
from the dump plane of the burner was imaged by planar
laser induced fluorescence (PLIF). The RPL burner was run using
four fuels; methane, a generic syngas (67.5% H2, 22.5% CO
and 10% CH4) and dilutions of these with nitrogen to a Wobbe
index of 15 MJ/m3. Each of the fuels was operated at several
equivalence ratios ranging from f = 0.80 to f = 1.80, for combustion
pressures of 3, 6 and 9 bar. It was found that the flame
position in the RPL, determined from temperature measurement
at the thermocouple positions, was dependent on the fuel, equivalence
ratio and to a lesser extent pressure. A link was established
between the OH distribution in the post burner region and
RPL temperature profiles based on the expected flame behavior
inside the RPL. For all measurement points some combustion occurred
within the burner volume, indicated by thermocouples at
the burner exit. (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/3972279
- author
- Whiddon, Ronald LU ; Sigfrid, Ivan LU ; Collin, Robert LU ; Klingmann, Jens LU and Aldén, Marcus LU
- organization
- publishing date
- 2013
- type
- Chapter in Book/Report/Conference proceeding
- publication status
- published
- subject
- keywords
- OH-LIF, Laser, Combustion, Syngas, Pressure, Experimental
- host publication
- Proceedings of ASME Turbo Expo 2013, GT2013-94443
- volume
- Volume 1A: Combustion, Fuels and Emissions
- pages
- 9 pages
- publisher
- American Society Of Mechanical Engineers (ASME)
- conference name
- ASME Turbo Expo 2013: Turbine Technical Conference and Exposition
- conference location
- San Antonio, United States
- conference dates
- 2013-06-03 - 2013-06-07
- external identifiers
-
- other:GT2013-94443
- scopus:84890227685
- ISBN
- 978-0-7918-5510-2
- DOI
- 10.1115/GT2013-94443
- language
- English
- LU publication?
- yes
- id
- 3d36c395-090a-496d-9bdf-68397385c5ef (old id 3972279)
- date added to LUP
- 2016-04-04 10:01:33
- date last changed
- 2022-01-29 19:42:47
@inproceedings{3d36c395-090a-496d-9bdf-68397385c5ef, abstract = {{Experiments were performed on the central body rich-pilotlean<br/><br> (RPL) burner of a Siemens Industrial Turbomachinary 4th<br/><br> generation DLE combustor to observe the combustion changes<br/><br> that may occur when using fuels other than natural gas. Measurements<br/><br> were taken of temperatures at multiple points along<br/><br> the RPL body while hydroxyl (OH) radical distribution extending<br/><br> from the dump plane of the burner was imaged by planar<br/><br> laser induced fluorescence (PLIF). The RPL burner was run using<br/><br> four fuels; methane, a generic syngas (67.5% H2, 22.5% CO<br/><br> and 10% CH4) and dilutions of these with nitrogen to a Wobbe<br/><br> index of 15 MJ/m3. Each of the fuels was operated at several<br/><br> equivalence ratios ranging from f = 0.80 to f = 1.80, for combustion<br/><br> pressures of 3, 6 and 9 bar. It was found that the flame<br/><br> position in the RPL, determined from temperature measurement<br/><br> at the thermocouple positions, was dependent on the fuel, equivalence<br/><br> ratio and to a lesser extent pressure. A link was established<br/><br> between the OH distribution in the post burner region and<br/><br> RPL temperature profiles based on the expected flame behavior<br/><br> inside the RPL. For all measurement points some combustion occurred<br/><br> within the burner volume, indicated by thermocouples at<br/><br> the burner exit.}}, author = {{Whiddon, Ronald and Sigfrid, Ivan and Collin, Robert and Klingmann, Jens and Aldén, Marcus}}, booktitle = {{Proceedings of ASME Turbo Expo 2013, GT2013-94443}}, isbn = {{978-0-7918-5510-2}}, keywords = {{OH-LIF; Laser; Combustion; Syngas; Pressure; Experimental}}, language = {{eng}}, publisher = {{American Society Of Mechanical Engineers (ASME)}}, title = {{Investigation of a Premixed Gas Turbine Combustor Central Body Burner Using OH Planar Laser Induced Fluorescence at Elevated Pressures}}, url = {{http://dx.doi.org/10.1115/GT2013-94443}}, doi = {{10.1115/GT2013-94443}}, volume = {{Volume 1A: Combustion, Fuels and Emissions}}, year = {{2013}}, }