Investigation on thermal performance of a high-temperature heat-pipe thermal protection structure
(2016) In Journal of Engineering Thermophysics 25(3). p.359-376- Abstract
Sharp leading edges with a millimeter-scale radius are required for hypersonic vehicles from aerodynamic reasons. However, with the leading edges being so sharp, stagnation regions at wing and tail leading edges suffer a hostile thermal environment. Therefore, a high-temperature heat pipe is considered to be integrated into the structure of the leading edge to reduce the temperature of the stagnation point. In this paper, a superalloy-refractory composite-container-“wall” combined with the wick and working fluid structure is proposed, which is proved to be a feasible design of a heat pipe for the semi-passive thermal protection system (TPS). The effects of different material of the exterior surface on the temperature distributions are... (More)
Sharp leading edges with a millimeter-scale radius are required for hypersonic vehicles from aerodynamic reasons. However, with the leading edges being so sharp, stagnation regions at wing and tail leading edges suffer a hostile thermal environment. Therefore, a high-temperature heat pipe is considered to be integrated into the structure of the leading edge to reduce the temperature of the stagnation point. In this paper, a superalloy-refractory composite-container-“wall” combined with the wick and working fluid structure is proposed, which is proved to be a feasible design of a heat pipe for the semi-passive thermal protection system (TPS). The effects of different material of the exterior surface on the temperature distributions are investigated. The effect of the half wedge angle, the design length and porosity of the wick is also investigated to find the effect of the geometry of the structure of the leading edge on the operation of the heat pipe.
(Less)
- author
- Xie, G. LU ; Ji, T. ; Sunden, B. LU ; Qin, J. and Lorenzini, G.
- organization
- publishing date
- 2016-07-01
- type
- Contribution to journal
- publication status
- published
- subject
- in
- Journal of Engineering Thermophysics
- volume
- 25
- issue
- 3
- pages
- 18 pages
- publisher
- Springer
- external identifiers
-
- wos:000384843200006
- scopus:84983063649
- ISSN
- 1810-2328
- DOI
- 10.1134/S1810232816030061
- language
- English
- LU publication?
- yes
- id
- fa7b20cd-e0d5-4979-8085-283946951070
- date added to LUP
- 2017-01-18 09:28:56
- date last changed
- 2024-09-08 05:29:49
@article{fa7b20cd-e0d5-4979-8085-283946951070, abstract = {{<p>Sharp leading edges with a millimeter-scale radius are required for hypersonic vehicles from aerodynamic reasons. However, with the leading edges being so sharp, stagnation regions at wing and tail leading edges suffer a hostile thermal environment. Therefore, a high-temperature heat pipe is considered to be integrated into the structure of the leading edge to reduce the temperature of the stagnation point. In this paper, a superalloy-refractory composite-container-“wall” combined with the wick and working fluid structure is proposed, which is proved to be a feasible design of a heat pipe for the semi-passive thermal protection system (TPS). The effects of different material of the exterior surface on the temperature distributions are investigated. The effect of the half wedge angle, the design length and porosity of the wick is also investigated to find the effect of the geometry of the structure of the leading edge on the operation of the heat pipe.</p>}}, author = {{Xie, G. and Ji, T. and Sunden, B. and Qin, J. and Lorenzini, G.}}, issn = {{1810-2328}}, language = {{eng}}, month = {{07}}, number = {{3}}, pages = {{359--376}}, publisher = {{Springer}}, series = {{Journal of Engineering Thermophysics}}, title = {{Investigation on thermal performance of a high-temperature heat-pipe thermal protection structure}}, url = {{http://dx.doi.org/10.1134/S1810232816030061}}, doi = {{10.1134/S1810232816030061}}, volume = {{25}}, year = {{2016}}, }