The effect on workload by using a support arm in parlour milking
(2003) In International Journal of Industrial Ergonomics 32(2). p.121-132- Abstract
- Swedish agriculture is currently undergoing radical changes with respect to the working environment. New production milking systems may alter the physical workload and thus have an effect on the development of musculoskeletal disorders. Earlier studies have shown that there is a manifest risk of suffering injury to the forearm, wrist and hand during machine milking especially during the attaching task (when holding the milking cluster in one hand while attaching the four teat-cups to the udder). High degrees of dorsiflexion and deviation of the wrist in combination with peak values of muscle activity in the forearm during milking might contribute injuries to the wrist and hand. Large-scale milk production increases the time spent... (More)
- Swedish agriculture is currently undergoing radical changes with respect to the working environment. New production milking systems may alter the physical workload and thus have an effect on the development of musculoskeletal disorders. Earlier studies have shown that there is a manifest risk of suffering injury to the forearm, wrist and hand during machine milking especially during the attaching task (when holding the milking cluster in one hand while attaching the four teat-cups to the udder). High degrees of dorsiflexion and deviation of the wrist in combination with peak values of muscle activity in the forearm during milking might contribute injuries to the wrist and hand. Large-scale milk production increases the time spent performing the tasks involved. As a consequence, the cumulative engagement in extreme positions and rapid movements, and high level of muscular load on the upper extremities will also increase. The aim of this study was to investigate the impact of the workload on the milker's forearm, wrist and hands resulting from using the prototype of a device designed to facilitate the attaching task. The device is constructed as a support arm where the milking cluster is suspended in order to reduce the workload. The study was carried out in a loose-housing system where the cows come to be milked in a parlour. Eleven milkers participated in the study. The muscle activity in the biceps and the forearm flexors, as well as positions and movements of the wrists were measured by electromyography and electrogoniometry. The attaching task was measured both with and without the device. When the prototype was used only a minor decrease in the muscular load on the holding side was recorded. Surprisingly, the effect on the wrist positions and movements was small. This marginal effect could be due to the fact that all the milkers were used to milking without the support arm and despite the training period, they were unable to make full use of the device. (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/307219
- author
- Stal, M ; Pinzke, S and Hansson, Gert-Åke LU
- organization
- publishing date
- 2003
- type
- Contribution to journal
- publication status
- published
- subject
- keywords
- musculoskeletal disorders, work related, upper extremities, physical workload, milking device, new, electrogoniometry, direct technical measurement, electromyography
- in
- International Journal of Industrial Ergonomics
- volume
- 32
- issue
- 2
- pages
- 121 - 132
- publisher
- Elsevier
- external identifiers
-
- wos:000183901400006
- scopus:0038141076
- ISSN
- 0169-8141
- DOI
- 10.1016/S0169-8141(03)00046-5
- language
- English
- LU publication?
- yes
- id
- e0d56511-d0b6-4050-864f-35f8f0369a42 (old id 307219)
- date added to LUP
- 2016-04-01 16:46:13
- date last changed
- 2022-02-05 18:26:28
@article{e0d56511-d0b6-4050-864f-35f8f0369a42, abstract = {{Swedish agriculture is currently undergoing radical changes with respect to the working environment. New production milking systems may alter the physical workload and thus have an effect on the development of musculoskeletal disorders. Earlier studies have shown that there is a manifest risk of suffering injury to the forearm, wrist and hand during machine milking especially during the attaching task (when holding the milking cluster in one hand while attaching the four teat-cups to the udder). High degrees of dorsiflexion and deviation of the wrist in combination with peak values of muscle activity in the forearm during milking might contribute injuries to the wrist and hand. Large-scale milk production increases the time spent performing the tasks involved. As a consequence, the cumulative engagement in extreme positions and rapid movements, and high level of muscular load on the upper extremities will also increase. The aim of this study was to investigate the impact of the workload on the milker's forearm, wrist and hands resulting from using the prototype of a device designed to facilitate the attaching task. The device is constructed as a support arm where the milking cluster is suspended in order to reduce the workload. The study was carried out in a loose-housing system where the cows come to be milked in a parlour. Eleven milkers participated in the study. The muscle activity in the biceps and the forearm flexors, as well as positions and movements of the wrists were measured by electromyography and electrogoniometry. The attaching task was measured both with and without the device. When the prototype was used only a minor decrease in the muscular load on the holding side was recorded. Surprisingly, the effect on the wrist positions and movements was small. This marginal effect could be due to the fact that all the milkers were used to milking without the support arm and despite the training period, they were unable to make full use of the device.}}, author = {{Stal, M and Pinzke, S and Hansson, Gert-Åke}}, issn = {{0169-8141}}, keywords = {{musculoskeletal disorders; work related; upper extremities; physical workload; milking device; new; electrogoniometry; direct technical measurement; electromyography}}, language = {{eng}}, number = {{2}}, pages = {{121--132}}, publisher = {{Elsevier}}, series = {{International Journal of Industrial Ergonomics}}, title = {{The effect on workload by using a support arm in parlour milking}}, url = {{http://dx.doi.org/10.1016/S0169-8141(03)00046-5}}, doi = {{10.1016/S0169-8141(03)00046-5}}, volume = {{32}}, year = {{2003}}, }