Melt processability and thermomechanical properties of blends based on polyhydroxyalkanoates and poly(butylene adipate-co-terephthalate)
Larsson, Matilda LU ; Markbo, Olivia and Jannasch, Patric LU
(2016)
In RSC Advances
6(50).
p.44354-44363
- Abstract
- The limited thermal stability of polyhydroxyalkanoates (PHAs) hinders their wide applicability, and methods to improve the processability of these biopolyesters are needed for efficient processing, e.g. by melt extrusion. In the present study we have shown by isothermal gravimetry, dynamic rheology and molecular weight analysis that the thermal stability of the PHAs at the processing temperature can be dramatically improved by simply washing the materials in a 1 mM aqueous HCl solution. Hence, the thermal decomposition temperature increased by up to 50 °C after the treatment. Subsequently, treated poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) were blended with different amounts of poly(butylene... (More)
- The limited thermal stability of polyhydroxyalkanoates (PHAs) hinders their wide applicability, and methods to improve the processability of these biopolyesters are needed for efficient processing, e.g. by melt extrusion. In the present study we have shown by isothermal gravimetry, dynamic rheology and molecular weight analysis that the thermal stability of the PHAs at the processing temperature can be dramatically improved by simply washing the materials in a 1 mM aqueous HCl solution. Hence, the thermal decomposition temperature increased by up to 50 °C after the treatment. Subsequently, treated poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) were blended with different amounts of poly(butylene adipate-co-terephthalate) by melt extrusion in order to further enhance the processability and thermomechanical properties. Microscopy of freeze fractured samples of the biodegradable blends showed phase separated blends with poor interfacial adhesion. Melt rheology and dynamic mechanical analysis results indicated a phase inversion between 60 and 80 wt% of the respective PHA. After adding dicumyl peroxide during the extrusion, the interfacial adhesion improved significantly, and the dynamic shear and tensile storage modulii increased with increasing content of the peroxide. The results of the present study demonstrate that an acid wash may significantly improve processability of PHAs, and that combinations of blending and reactive extrusion can be employed to further enhance and tune the thermomechanical properties of the materials. (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/78cb0c63-7bd4-42c6-8c23-4493fa275f6a
- author
- Larsson, Matilda
LU
; Markbo, Olivia
and Jannasch, Patric
LU
- organization
- publishing date
- 2016-04-28
- type
- Contribution to journal
- publication status
- published
- subject
- in
- RSC Advances
- volume
- 6
- issue
- 50
- pages
- 10 pages
- publisher
- Royal Society of Chemistry
- external identifiers
-
- scopus:84971350778
- wos:000376119000061
- ISSN
- 2046-2069
- DOI
- 10.1039/C6RA06282B
- language
- English
- LU publication?
- yes
- additional info
- Electronic supplementary information (ESI) available: Additional data and graphs. See DOI: 10.1039/c6ra06282b
- id
- 78cb0c63-7bd4-42c6-8c23-4493fa275f6a
- date added to LUP
- 2016-04-28 12:36:21
- date last changed
- 2022-03-23 22:43:24
@article{78cb0c63-7bd4-42c6-8c23-4493fa275f6a,
abstract = {{The limited thermal stability of polyhydroxyalkanoates (PHAs) hinders their wide applicability, and methods to improve the processability of these biopolyesters are needed for efficient processing, e.g. by melt extrusion. In the present study we have shown by isothermal gravimetry, dynamic rheology and molecular weight analysis that the thermal stability of the PHAs at the processing temperature can be dramatically improved by simply washing the materials in a 1 mM aqueous HCl solution. Hence, the thermal decomposition temperature increased by up to 50 °C after the treatment. Subsequently, treated poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-<i>co</i>-4-hydroxybutyrate) were blended with different amounts of poly(butylene adipate-co-terephthalate) by melt extrusion in order to further enhance the processability and thermomechanical properties. Microscopy of freeze fractured samples of the biodegradable blends showed phase separated blends with poor interfacial adhesion. Melt rheology and dynamic mechanical analysis results indicated a phase inversion between 60 and 80 wt% of the respective PHA. After adding dicumyl peroxide during the extrusion, the interfacial adhesion improved significantly, and the dynamic shear and tensile storage modulii increased with increasing content of the peroxide. The results of the present study demonstrate that an acid wash may significantly improve processability of PHAs, and that combinations of blending and reactive extrusion can be employed to further enhance and tune the thermomechanical properties of the materials.}},
author = {{Larsson, Matilda and Markbo, Olivia and Jannasch, Patric}},
issn = {{2046-2069}},
language = {{eng}},
month = {{04}},
number = {{50}},
pages = {{44354--44363}},
publisher = {{Royal Society of Chemistry}},
series = {{RSC Advances}},
title = {{Melt processability and thermomechanical properties of blends based on polyhydroxyalkanoates and poly(butylene adipate-<i>co</i>-terephthalate)}},
url = {{http://dx.doi.org/10.1039/C6RA06282B}},
doi = {{10.1039/C6RA06282B}},
volume = {{6}},
year = {{2016}},
}