High resolution strain mapping of a single axially heterostructured nanowire using scanning X-ray diffraction
(2020) In Nano Research 13(9). p.2460-2468- Abstract
Axially heterostructured nanowires are a promising platform for next generation electronic and optoelectronic devices. Reports based on theoretical modeling have predicted more complex strain distributions and increased critical layer thicknesses than in thin films, due to lateral strain relaxation at the surface, but the understanding of the growth and strain distributions in these complex structures is hampered by the lack of high-resolution characterization techniques. Here, we demonstrate strain mapping of an axially segmented GaInP-InP 190 nm diameter nanowire heterostructure using scanning X-ray diffraction. We systematically investigate the strain distribution and lattice tilt in three different segment lengths from 45 to 170 nm,... (More)
Axially heterostructured nanowires are a promising platform for next generation electronic and optoelectronic devices. Reports based on theoretical modeling have predicted more complex strain distributions and increased critical layer thicknesses than in thin films, due to lateral strain relaxation at the surface, but the understanding of the growth and strain distributions in these complex structures is hampered by the lack of high-resolution characterization techniques. Here, we demonstrate strain mapping of an axially segmented GaInP-InP 190 nm diameter nanowire heterostructure using scanning X-ray diffraction. We systematically investigate the strain distribution and lattice tilt in three different segment lengths from 45 to 170 nm, obtaining strain maps with about 10−4 relative strain sensitivity. The experiments were performed using the 90 nm diameter nanofocus at the NanoMAX beamline, taking advantage of the high coherent flux from the first diffraction limited storage ring MAX IV. The experimental results are in good agreement with a full simulation of the experiment based on a three-dimensional (3D) finite element model. The largest segments show a complex profile, where the lateral strain relaxation at the surface leads to a dome-shaped strain distribution from the mismatched interfaces, and a change from tensile to compressive strain within a single segment. The lattice tilt maps show a cross-shaped profile with excellent qualitative and quantitative agreement with the simulations. In contrast, the shortest measured InP segment is almost fully adapted to the surrounding GaInP segments. [Figure not available: see fulltext.].
(Less)
- author
- organization
- publishing date
- 2020-09
- type
- Contribution to journal
- publication status
- published
- subject
- keywords
- finite element modeling, heterostructure, MAX IV, nanowire, strain mapping, X-ray diffraction (XRD)
- in
- Nano Research
- volume
- 13
- issue
- 9
- pages
- 9 pages
- publisher
- Springer
- external identifiers
-
- scopus:85087078261
- ISSN
- 1998-0124
- DOI
- 10.1007/s12274-020-2878-6
- language
- English
- LU publication?
- yes
- id
- a142a076-a050-405a-9df7-7ada05322f3e
- date added to LUP
- 2020-07-06 08:48:16
- date last changed
- 2023-11-20 07:40:26
@article{a142a076-a050-405a-9df7-7ada05322f3e,
abstract = {{<p>Axially heterostructured nanowires are a promising platform for next generation electronic and optoelectronic devices. Reports based on theoretical modeling have predicted more complex strain distributions and increased critical layer thicknesses than in thin films, due to lateral strain relaxation at the surface, but the understanding of the growth and strain distributions in these complex structures is hampered by the lack of high-resolution characterization techniques. Here, we demonstrate strain mapping of an axially segmented GaInP-InP 190 nm diameter nanowire heterostructure using scanning X-ray diffraction. We systematically investigate the strain distribution and lattice tilt in three different segment lengths from 45 to 170 nm, obtaining strain maps with about 10<sup>−4</sup> relative strain sensitivity. The experiments were performed using the 90 nm diameter nanofocus at the NanoMAX beamline, taking advantage of the high coherent flux from the first diffraction limited storage ring MAX IV. The experimental results are in good agreement with a full simulation of the experiment based on a three-dimensional (3D) finite element model. The largest segments show a complex profile, where the lateral strain relaxation at the surface leads to a dome-shaped strain distribution from the mismatched interfaces, and a change from tensile to compressive strain within a single segment. The lattice tilt maps show a cross-shaped profile with excellent qualitative and quantitative agreement with the simulations. In contrast, the shortest measured InP segment is almost fully adapted to the surrounding GaInP segments. [Figure not available: see fulltext.].</p>}},
author = {{Hammarberg, Susanna and Dagytė, Vilgailė and Chayanun, Lert and Hill, Megan O. and Wyke, Alexander and Björling, Alexander and Johansson, Ulf and Kalbfleisch, Sebastian and Heurlin, Magnus and Lauhon, Lincoln J. and Borgström, Magnus T. and Wallentin, Jesper}},
issn = {{1998-0124}},
keywords = {{finite element modeling; heterostructure; MAX IV; nanowire; strain mapping; X-ray diffraction (XRD)}},
language = {{eng}},
number = {{9}},
pages = {{2460--2468}},
publisher = {{Springer}},
series = {{Nano Research}},
title = {{High resolution strain mapping of a single axially heterostructured nanowire using scanning X-ray diffraction}},
url = {{http://dx.doi.org/10.1007/s12274-020-2878-6}},
doi = {{10.1007/s12274-020-2878-6}},
volume = {{13}},
year = {{2020}},
}