An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles
Fyhr, Pontus LU ; Hjelm, Rikard LU and Wahlström, Jens LU
(2022)
In Tribology in Industry
44(1).
p.123-131
- Abstract
Drag torque in a disc brake is the residual torque when the brake is not activated. This torque can adversely influence the total energy consumption, life of the brake components, and level of airborne wear particles from vehicles. Drag torque is of special interest for long haul trucking since it could have an effect of the total energy consumption. Drag torque performance of a disc brake is usually evaluated with conventional inertia dynamometers. Vibrations induced by the wheel can help to retract the pads from the disc and decrease the drag torque. It is hard to study this phenomenon with conventional inertia dynamometers since there is usually no system to induce a forced vibration on the brake. Therefore, the aim of the paper is... (More)
Drag torque in a disc brake is the residual torque when the brake is not activated. This torque can adversely influence the total energy consumption, life of the brake components, and level of airborne wear particles from vehicles. Drag torque is of special interest for long haul trucking since it could have an effect of the total energy consumption. Drag torque performance of a disc brake is usually evaluated with conventional inertia dynamometers. Vibrations induced by the wheel can help to retract the pads from the disc and decrease the drag torque. It is hard to study this phenomenon with conventional inertia dynamometers since there is usually no system to induce a forced vibration on the brake. Therefore, the aim of the paper is to investigate the effect of vibrations on the drag torque for a commercial vehicle disc brake with a novel test setup. This is done by comparing test run with and without pads, forced vibrations, and pad retraction springs. The results indicate that the forced vibrations strongly affect the level of measured drag torque. In addition, the introduction of a retraction spring can reduce drag torque with more than 50% when vibrations are induced.
(Less)
- author
- Fyhr, Pontus
LU
; Hjelm, Rikard
LU
and Wahlström, Jens
LU
- organization
- publishing date
- 2022
- type
- Contribution to journal
- publication status
- published
- subject
- keywords
- Disc brake, Drag torque, Heavy commercial vehicles, Testing vibrations
- in
- Tribology in Industry
- volume
- 44
- issue
- 1
- pages
- 9 pages
- publisher
- Masinski Fakultet - Kragujevac
- external identifiers
-
- scopus:85128870764
- ISSN
- 0354-8996
- DOI
- 10.24874/ti.1132.06.21.09
- language
- English
- LU publication?
- yes
- additional info
- Funding Information: The authors would like to thank Haldex Brake Products AB for their valuable support. Publisher Copyright: © 2022 Published by Faculty of Engineering.
- id
- bc0ea695-1dba-4a04-84ed-a54edc599638
- date added to LUP
- 2022-05-08 17:18:17
- date last changed
- 2022-05-12 09:25:27
@article{bc0ea695-1dba-4a04-84ed-a54edc599638,
abstract = {{<p>Drag torque in a disc brake is the residual torque when the brake is not activated. This torque can adversely influence the total energy consumption, life of the brake components, and level of airborne wear particles from vehicles. Drag torque is of special interest for long haul trucking since it could have an effect of the total energy consumption. Drag torque performance of a disc brake is usually evaluated with conventional inertia dynamometers. Vibrations induced by the wheel can help to retract the pads from the disc and decrease the drag torque. It is hard to study this phenomenon with conventional inertia dynamometers since there is usually no system to induce a forced vibration on the brake. Therefore, the aim of the paper is to investigate the effect of vibrations on the drag torque for a commercial vehicle disc brake with a novel test setup. This is done by comparing test run with and without pads, forced vibrations, and pad retraction springs. The results indicate that the forced vibrations strongly affect the level of measured drag torque. In addition, the introduction of a retraction spring can reduce drag torque with more than 50% when vibrations are induced.</p>}},
author = {{Fyhr, Pontus and Hjelm, Rikard and Wahlström, Jens}},
issn = {{0354-8996}},
keywords = {{Disc brake; Drag torque; Heavy commercial vehicles; Testing vibrations}},
language = {{eng}},
number = {{1}},
pages = {{123--131}},
publisher = {{Masinski Fakultet - Kragujevac}},
series = {{Tribology in Industry}},
title = {{An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles}},
url = {{http://dx.doi.org/10.24874/ti.1132.06.21.09}},
doi = {{10.24874/ti.1132.06.21.09}},
volume = {{44}},
year = {{2022}},
}