Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

Obstacle contained system (OCS) design method and its application in valve core orifice design of pilot-control globe valve

Qian, Jin Yuan LU orcid and Jin, Zhi Jiang (2017) In Chinese Journal of Engineering Design 24(5). p.496-502
Abstract

With the development of the society and the times, traditional parametric design methods are witnessing a severe challenge due to the more and more complex physical systems. Thus, developing novel parametric analysis methods is very important for dealing with complex physical systems, refining useful parameters from numerous data, and proposing accurate prediction formulas. A spring slider system, a direct-current circuit system, a pipeline pressure drop system and a steady heat transfer model of flat plate system were described from the point of systemic parametric analysis method. Then, the key physical parameters in above four systems were summarized. Based on the comparative results, a novel systemic parametric design method,... (More)

With the development of the society and the times, traditional parametric design methods are witnessing a severe challenge due to the more and more complex physical systems. Thus, developing novel parametric analysis methods is very important for dealing with complex physical systems, refining useful parameters from numerous data, and proposing accurate prediction formulas. A spring slider system, a direct-current circuit system, a pipeline pressure drop system and a steady heat transfer model of flat plate system were described from the point of systemic parametric analysis method. Then, the key physical parameters in above four systems were summarized. Based on the comparative results, a novel systemic parametric design method, obstacle contained system (OCS) design method, was proposed. The OCS was made up of three elements:an obstacle element, a pass body element and a D-value element. With an abundant accurate data pole, the OCS design method could build the direct relationship of the obstacle element and the D-value element, which meant the simplification of the physical models and much easier to get relatively accurate results. Meanwhile, the design of pilot-control globe valve orifice was checked with both the OCS design method and the numerical simulation. The diameter of orifice on the valve core could influence the pressure difference and the maximum vapor rate inside pilot-control globe valves. Achieved by two different methods, the OCS design method and the numerical simulation, the results showed that the effects of orifice diameters on the pressure difference and the maximum vapor rate under different inlet velocities, were within 2% errors, which was reasonable and acceptable for the engineering application. In other words, the OCS design method was credible for parametric analysis. In future, the OCS design method has a broad application prospect to analyze various types of physical models especially in the era of big data.

(Less)
Please use this url to cite or link to this publication:
author
and
organization
publishing date
type
Contribution to journal
publication status
published
subject
keywords
Maximum vapor rate, Obstacle contained system, Pilot-control globe valve, Pressure difference, System design method
in
Chinese Journal of Engineering Design
volume
24
issue
5
pages
7 pages
publisher
Zhejiang Daxue Chubanshe
external identifiers
  • scopus:85033483337
ISSN
1006-754X
DOI
10.3785/j.issn.1006-754X.2017.05.002
language
English
LU publication?
yes
id
bdd5f43a-013e-49cd-9fed-42978e34503d
date added to LUP
2017-11-21 07:44:25
date last changed
2022-03-09 07:29:13
@article{bdd5f43a-013e-49cd-9fed-42978e34503d,
  abstract     = {{<p>With the development of the society and the times, traditional parametric design methods are witnessing a severe challenge due to the more and more complex physical systems. Thus, developing novel parametric analysis methods is very important for dealing with complex physical systems, refining useful parameters from numerous data, and proposing accurate prediction formulas. A spring slider system, a direct-current circuit system, a pipeline pressure drop system and a steady heat transfer model of flat plate system were described from the point of systemic parametric analysis method. Then, the key physical parameters in above four systems were summarized. Based on the comparative results, a novel systemic parametric design method, obstacle contained system (OCS) design method, was proposed. The OCS was made up of three elements:an obstacle element, a pass body element and a D-value element. With an abundant accurate data pole, the OCS design method could build the direct relationship of the obstacle element and the D-value element, which meant the simplification of the physical models and much easier to get relatively accurate results. Meanwhile, the design of pilot-control globe valve orifice was checked with both the OCS design method and the numerical simulation. The diameter of orifice on the valve core could influence the pressure difference and the maximum vapor rate inside pilot-control globe valves. Achieved by two different methods, the OCS design method and the numerical simulation, the results showed that the effects of orifice diameters on the pressure difference and the maximum vapor rate under different inlet velocities, were within 2% errors, which was reasonable and acceptable for the engineering application. In other words, the OCS design method was credible for parametric analysis. In future, the OCS design method has a broad application prospect to analyze various types of physical models especially in the era of big data.</p>}},
  author       = {{Qian, Jin Yuan and Jin, Zhi Jiang}},
  issn         = {{1006-754X}},
  keywords     = {{Maximum vapor rate; Obstacle contained system; Pilot-control globe valve; Pressure difference; System design method}},
  language     = {{eng}},
  month        = {{10}},
  number       = {{5}},
  pages        = {{496--502}},
  publisher    = {{Zhejiang Daxue Chubanshe}},
  series       = {{Chinese Journal of Engineering Design}},
  title        = {{Obstacle contained system (OCS) design method and its application in valve core orifice design of pilot-control globe valve}},
  url          = {{http://dx.doi.org/10.3785/j.issn.1006-754X.2017.05.002}},
  doi          = {{10.3785/j.issn.1006-754X.2017.05.002}},
  volume       = {{24}},
  year         = {{2017}},
}