Fibre directions at a branch-stem junction in Norway spruce : a microscale investigation using X-ray computed tomography
(2022) In Wood Science and Technology 56(1). p.147-169- Abstract
The connection between branch and trunk in a tree must be strong enough to transfer all loads acting on the branch, and it is well known that such branch-stem connections are indeed very strong. In this paper, X-ray computer tomography is employed to investigate the local fibre orientation in the close surrounding of a knot in a Norway spruce specimen to better understand the origins of the mechanical strength of the branch-trunk connection. First, a wood specimen containing an entire knot from pith to bark was imaged with a voxel size of 52 µm. Subsequently, smaller specimens were cut from this original specimen and imaged again with increasingly higher resolution over four levels. With the highest resolution level (2.6 µm voxel size),... (More)
The connection between branch and trunk in a tree must be strong enough to transfer all loads acting on the branch, and it is well known that such branch-stem connections are indeed very strong. In this paper, X-ray computer tomography is employed to investigate the local fibre orientation in the close surrounding of a knot in a Norway spruce specimen to better understand the origins of the mechanical strength of the branch-trunk connection. First, a wood specimen containing an entire knot from pith to bark was imaged with a voxel size of 52 µm. Subsequently, smaller specimens were cut from this original specimen and imaged again with increasingly higher resolution over four levels. With the highest resolution level (2.6 µm voxel size), the tracheids with smallest lumen were successfully traced. The results revealed how the direction of the fibre paths that start below the knot curve around it as the paths progress upwards to the region just above the knot, where the paths divide into two: one set of paths integrating with the knot on its top side and the other set continuing up along the trunk. Fibres that integrate with the knot at its top follow paths just before they continue into the knot, with a radius of curvature of only about 1 mm in both vertical and horizontal directions. No abrupt change of fibre pattern between latewood and earlywood is observed; rather, a continuous change of fibre direction across annual layers can be seen. The detailed characterisation of the local fibre structure around the knot provides new data that can explain the remarkable strength of the branch-trunk connection.
(Less)
- author
- Hu, Min ; Olsson, Anders ; Hall, Stephen LU and Seifert, Thomas
- organization
- publishing date
- 2022-01-11
- type
- Contribution to journal
- publication status
- published
- subject
- in
- Wood Science and Technology
- volume
- 56
- issue
- 1
- pages
- 147 - 169
- publisher
- Springer
- external identifiers
-
- scopus:85122722234
- ISSN
- 0043-7719
- DOI
- 10.1007/s00226-021-01353-y
- language
- English
- LU publication?
- yes
- id
- 411c14f0-7f59-4877-a99f-c07b9f585661
- date added to LUP
- 2022-02-18 12:19:54
- date last changed
- 2022-11-08 08:02:59
@article{411c14f0-7f59-4877-a99f-c07b9f585661,
abstract = {{<p>The connection between branch and trunk in a tree must be strong enough to transfer all loads acting on the branch, and it is well known that such branch-stem connections are indeed very strong. In this paper, X-ray computer tomography is employed to investigate the local fibre orientation in the close surrounding of a knot in a Norway spruce specimen to better understand the origins of the mechanical strength of the branch-trunk connection. First, a wood specimen containing an entire knot from pith to bark was imaged with a voxel size of 52 µm. Subsequently, smaller specimens were cut from this original specimen and imaged again with increasingly higher resolution over four levels. With the highest resolution level (2.6 µm voxel size), the tracheids with smallest lumen were successfully traced. The results revealed how the direction of the fibre paths that start below the knot curve around it as the paths progress upwards to the region just above the knot, where the paths divide into two: one set of paths integrating with the knot on its top side and the other set continuing up along the trunk. Fibres that integrate with the knot at its top follow paths just before they continue into the knot, with a radius of curvature of only about 1 mm in both vertical and horizontal directions. No abrupt change of fibre pattern between latewood and earlywood is observed; rather, a continuous change of fibre direction across annual layers can be seen. The detailed characterisation of the local fibre structure around the knot provides new data that can explain the remarkable strength of the branch-trunk connection.</p>}},
author = {{Hu, Min and Olsson, Anders and Hall, Stephen and Seifert, Thomas}},
issn = {{0043-7719}},
language = {{eng}},
month = {{01}},
number = {{1}},
pages = {{147--169}},
publisher = {{Springer}},
series = {{Wood Science and Technology}},
title = {{Fibre directions at a branch-stem junction in Norway spruce : a microscale investigation using X-ray computed tomography}},
url = {{http://dx.doi.org/10.1007/s00226-021-01353-y}},
doi = {{10.1007/s00226-021-01353-y}},
volume = {{56}},
year = {{2022}},
}