Oleksandr Gutnichenko
1 – 34 of 34
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
A Methodology Using Monte-Carlo Simulation on Nanoindentation Deconvolution for Metal Classification
2024) 11th Swedish Production Symposium In Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning 52. p.613-627(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Wear mechanisms in Ti(C,N)-Al2O3 coated carbide during sustainable machining CGI
(
- Contribution to journal › Article
- 2021
-
Mark
Improvement of tool utilization when hard turning with cBN tools at varying process parameters
(
- Contribution to journal › Article
-
Mark
Evolution of magnetic properties during tempering
2021) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
- 2020
-
Mark
Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications
(
- Contribution to journal › Article
-
Mark
Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718
(
- Contribution to journal › Article
- 2019
-
Mark
Determining process parameters for successful material reclamation of lead-free brass chips using hot forging operations: Lubrication
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2018
-
Mark
An inverse problem for retrieving time dependency of heat flux in metal cutting via linear programming
(
- Contribution to journal › Article
-
Mark
Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat flux in metal cutting : Experiment, model, and comparative analysis
(
- Contribution to journal › Article
-
Mark
Minimum quantity lubrication (MQL) with carbon nanostructured additives in sheet metal forming
(
- Contribution to journal › Article
-
Mark
Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718
(
- Contribution to journal › Article
- 2017
-
Mark
The influence of tool micro-geometry on stress distribution in turning operations of AISI 4140 by FE analysis
(
- Contribution to journal › Article
-
Mark
Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools
(
- Contribution to journal › Article
-
Mark
Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite
(
- Contribution to journal › Article
-
Mark
Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.122-127(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling of Force Build-up Process and Optimization of Tool Geometry when Intermittent Turning
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.393-398(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2016
-
Mark
Influence of Cutting Edge Geometry on Force Build-up Process in Intermittent Turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Wear and Vibrations Generated When Turning High-chromium White Cast Iron with pCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters under Variation of Side and Back Rake Angle
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 2: Variation of Tool Geometry along the Edge Line
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance assessment of pCBN and bCBN tools in machining of high-chromium white cast iron
(
- Contribution to journal › Article
- 2014
-
Mark
Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel
(
- Contribution to journal › Article
-
Mark
Machinability and process stability when turning Alloy 718 with standard and produced by selective laser sintering toolholders
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Nano graphite flakes as lubricant additive
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Self-generated vibrations and process stability when turning high chromium white cast iron with PCBN tools
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of cutting speed and tool wear on vibrations and process stability when turning Inconel 718 with PCBN tools
(
- Contribution to journal › Article
- 2013
-
Mark
Dynamic Stability of the Process of Turning Nickel Superalloys Using a Toolholder Produced by Selective Laser Sintering
(
- Contribution to journal › Article
-
Mark
Effects of Cutting Speed when Turning Age Hardened Inconel 718 with PCBN Tools of Binderless and Low-CBN Grades
(
- Contribution to journal › Article
-
Mark
Tool wear and tool life of conventional pcBN, binderless cBN and wBN-cBN tool materials in continuous finish hard turning of cold work tool steel
2013) 16-th International Conference Rock- and materials-processing tools: engineering, technology and application(
- Contribution to conference › Paper, not in proceeding
- 2012
-
Mark
Comprehensive dynamic analysis of vibration and stability when ultrahigh speed turning Inconel 718 with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding