Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

Analytical and Experimental Determination of the Ra Surface Roughness during Turning

Ståhl, Jan-Eric LU ; Schultheiss, Fredrik LU and Hägglund, Sören (2011) 1st CIRP Conference on Surface Integrity, 2012 In Procedia Engineering p.349-356
Abstract
In this article an analytical equation for calculating the theoretical arithmetic mean surface roughness, Ra, in the case of turning using a tool with a circular nose radius is presented. The deviation that often occurs between the expected and the obtained surface roughness during these machining operations is investigated. Influence of the minimum chip thickness is discussed especially in regards to the related phenomenon of so called side flow of material on the machined surface. Three different kinds of workpiece materials have been investigated in order to gain a better understanding of their influence on the obtained surface roughness. The obtained results show that the surface roughness could be considered as being inside an... (More)
In this article an analytical equation for calculating the theoretical arithmetic mean surface roughness, Ra, in the case of turning using a tool with a circular nose radius is presented. The deviation that often occurs between the expected and the obtained surface roughness during these machining operations is investigated. Influence of the minimum chip thickness is discussed especially in regards to the related phenomenon of so called side flow of material on the machined surface. Three different kinds of workpiece materials have been investigated in order to gain a better understanding of their influence on the obtained surface roughness. The obtained results show that the surface roughness could be considered as being inside an interval of two analytically determined Ra-values. (Less)
Please use this url to cite or link to this publication:
author
; and
organization
publishing date
type
Chapter in Book/Report/Conference proceeding
publication status
published
subject
keywords
Machining, Turning, Surface Roughness, Surface Integrity
host publication
1st CIRP Conference on Surface Integrity (CSI)
series title
Procedia Engineering
issue
19
pages
349 - 356
publisher
Elsevier
conference name
1st CIRP Conference on Surface Integrity, 2012
conference location
Bremen, Germany
conference dates
2012-01-30 - 2020-02-01
external identifiers
  • wos:000300398200054
  • scopus:83755207247
ISSN
1877-7058
DOI
10.1016/j.proeng.2011.11.124
language
English
LU publication?
yes
additional info
Proceedia engineering, volume 19, Pages 1-414 (2011) 1st CIRP Conference on Surface Integrity (CSI) Edited by Ekkard Brinksmeier, Ibrahim S. Jawahir and Daniel Meyer
id
d25f1779-d5fc-458c-87ec-4ddc619ccb73 (old id 2225097)
date added to LUP
2016-04-01 13:28:42
date last changed
2022-04-11 20:48:13
@inproceedings{d25f1779-d5fc-458c-87ec-4ddc619ccb73,
  abstract     = {{In this article an analytical equation for calculating the theoretical arithmetic mean surface roughness, Ra, in the case of turning using a tool with a circular nose radius is presented. The deviation that often occurs between the expected and the obtained surface roughness during these machining operations is investigated. Influence of the minimum chip thickness is discussed especially in regards to the related phenomenon of so called side flow of material on the machined surface. Three different kinds of workpiece materials have been investigated in order to gain a better understanding of their influence on the obtained surface roughness. The obtained results show that the surface roughness could be considered as being inside an interval of two analytically determined Ra-values.}},
  author       = {{Ståhl, Jan-Eric and Schultheiss, Fredrik and Hägglund, Sören}},
  booktitle    = {{1st CIRP Conference on Surface Integrity (CSI)}},
  issn         = {{1877-7058}},
  keywords     = {{Machining; Turning; Surface Roughness; Surface Integrity}},
  language     = {{eng}},
  number       = {{19}},
  pages        = {{349--356}},
  publisher    = {{Elsevier}},
  series       = {{Procedia Engineering}},
  title        = {{Analytical and Experimental Determination of the Ra Surface Roughness during Turning}},
  url          = {{http://dx.doi.org/10.1016/j.proeng.2011.11.124}},
  doi          = {{10.1016/j.proeng.2011.11.124}},
  year         = {{2011}},
}