Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

FE simulation and experimental verification of side-flow and burr formation in machining of oxygen-free copper

Olsson, Mike LU orcid ; Persson, Henrik LU ; Agmell, Mathias LU ; Bushlya, Volodymyr LU and Ståhl, Jan Eric LU (2018) 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018 In Procedia CIRP 72. p.1427-1432
Abstract

This article considers the influence of cutting data on burr formation when machining oxygen-free copper in a longitudinal turning operation. Burr formation and side-flow frequently occur in a cutting process, resulting in highly undesirable poor surface integrity and reduced dimensional accuracy of the machined components. Finite Element (FE) simulations of a cutting process were used to simulate radial burr formation for variable cutting depth, feed and major cutting edge angle. The results from FE simulations are compared with the experiments of longitudinal turning. Decrease of depth of cut and major cutting edge angle result in reduced burr formation. Additionally, high speed filming performed during the machining revealed a... (More)

This article considers the influence of cutting data on burr formation when machining oxygen-free copper in a longitudinal turning operation. Burr formation and side-flow frequently occur in a cutting process, resulting in highly undesirable poor surface integrity and reduced dimensional accuracy of the machined components. Finite Element (FE) simulations of a cutting process were used to simulate radial burr formation for variable cutting depth, feed and major cutting edge angle. The results from FE simulations are compared with the experiments of longitudinal turning. Decrease of depth of cut and major cutting edge angle result in reduced burr formation. Additionally, high speed filming performed during the machining revealed a five-stage cycle of burr formation.

(Less)
Please use this url to cite or link to this publication:
author
; ; ; and
organization
publishing date
type
Chapter in Book/Report/Conference proceeding
publication status
published
subject
keywords
Burr formation, copper, Finite Element Method (FEM), machining
host publication
Procedia CIRP
series title
Procedia CIRP
volume
72
pages
6 pages
conference name
51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018
conference location
Stockholm, Sweden
conference dates
2018-05-16 - 2018-05-18
external identifiers
  • scopus:85049580490
ISSN
2212-8271
DOI
10.1016/j.procir.2018.03.165
language
English
LU publication?
yes
id
71cd49d0-98bd-4861-aac7-7c1d991a0105
date added to LUP
2018-07-26 09:32:21
date last changed
2022-03-25 03:11:15
@inproceedings{71cd49d0-98bd-4861-aac7-7c1d991a0105,
  abstract     = {{<p>This article considers the influence of cutting data on burr formation when machining oxygen-free copper in a longitudinal turning operation. Burr formation and side-flow frequently occur in a cutting process, resulting in highly undesirable poor surface integrity and reduced dimensional accuracy of the machined components. Finite Element (FE) simulations of a cutting process were used to simulate radial burr formation for variable cutting depth, feed and major cutting edge angle. The results from FE simulations are compared with the experiments of longitudinal turning. Decrease of depth of cut and major cutting edge angle result in reduced burr formation. Additionally, high speed filming performed during the machining revealed a five-stage cycle of burr formation.</p>}},
  author       = {{Olsson, Mike and Persson, Henrik and Agmell, Mathias and Bushlya, Volodymyr and Ståhl, Jan Eric}},
  booktitle    = {{Procedia CIRP}},
  issn         = {{2212-8271}},
  keywords     = {{Burr formation; copper; Finite Element Method (FEM); machining}},
  language     = {{eng}},
  month        = {{01}},
  pages        = {{1427--1432}},
  series       = {{Procedia CIRP}},
  title        = {{FE simulation and experimental verification of side-flow and burr formation in machining of oxygen-free copper}},
  url          = {{http://dx.doi.org/10.1016/j.procir.2018.03.165}},
  doi          = {{10.1016/j.procir.2018.03.165}},
  volume       = {{72}},
  year         = {{2018}},
}