Processing and characterization of large area InP nanowire photovoltaic devices
(2023) In Nanotechnology 34(29).- Abstract
III−V nanowire (NW) photovoltaic devices promise high efficiencies at reduced materials usage. However, research has so far focused on small devices, mostly ≤1 mm2. In this study, the upscaling potential of axial junction InP NW photovoltaic devices is investigated. Device processing was carried out on a full 2″ wafer, with device sizes up to 1 cm2, which is a significant increase from the mm-scale III−V NW photovoltaic devices published previously. The short-circuit current density of the largest 1 cm2 devices, in which 460 million NWs are contacted in parallel, is on par with smaller devices. This enables a record power generation of 6.0 mW under AM1.5 G illumination, more than one order of magnitude... (More)
III−V nanowire (NW) photovoltaic devices promise high efficiencies at reduced materials usage. However, research has so far focused on small devices, mostly ≤1 mm2. In this study, the upscaling potential of axial junction InP NW photovoltaic devices is investigated. Device processing was carried out on a full 2″ wafer, with device sizes up to 1 cm2, which is a significant increase from the mm-scale III−V NW photovoltaic devices published previously. The short-circuit current density of the largest 1 cm2 devices, in which 460 million NWs are contacted in parallel, is on par with smaller devices. This enables a record power generation of 6.0 mW under AM1.5 G illumination, more than one order of magnitude higher than previous III−V NW photovoltaic devices. On the other hand, the fill factor of the larger devices is lower in comparison with smaller devices, which affects the device efficiency. By use of electroluminescence mapping, resistive losses in the indium tin oxide (ITO) front contact are found to limit the fill factor of the large devices. We use combined light-beam induced current (LBIC) and photoluminescence (PL) mapping as a powerful characterization tool for NW photovoltaic devices. From the LBIC and PL maps, local defects can be identified on the fully processed devices.
(Less)
- author
- Alcer, David
LU
; Hrachowina, Lukas LU ; Hessman, Dan LU and Borgström, Magnus T. LU
- organization
- publishing date
- 2023-07-16
- type
- Contribution to journal
- publication status
- published
- subject
- keywords
- InP, light-beam induced current (LBIC), nanowire photovoltaics, photoluminescence (PL) mapping
- in
- Nanotechnology
- volume
- 34
- issue
- 29
- article number
- 295402
- publisher
- IOP Publishing
- external identifiers
-
- pmid:37044082
- scopus:85158863291
- ISSN
- 0957-4484
- DOI
- 10.1088/1361-6528/accc37
- language
- English
- LU publication?
- yes
- id
- 31d12358-e72a-4aea-830f-fc9cba90967a
- date added to LUP
- 2023-08-10 10:55:21
- date last changed
- 2024-09-07 13:30:02
@article{31d12358-e72a-4aea-830f-fc9cba90967a, abstract = {{<p>III−V nanowire (NW) photovoltaic devices promise high efficiencies at reduced materials usage. However, research has so far focused on small devices, mostly ≤1 mm<sup>2</sup>. In this study, the upscaling potential of axial junction InP NW photovoltaic devices is investigated. Device processing was carried out on a full 2″ wafer, with device sizes up to 1 cm<sup>2</sup>, which is a significant increase from the mm-scale III−V NW photovoltaic devices published previously. The short-circuit current density of the largest 1 cm<sup>2</sup> devices, in which 460 million NWs are contacted in parallel, is on par with smaller devices. This enables a record power generation of 6.0 mW under AM1.5 G illumination, more than one order of magnitude higher than previous III−V NW photovoltaic devices. On the other hand, the fill factor of the larger devices is lower in comparison with smaller devices, which affects the device efficiency. By use of electroluminescence mapping, resistive losses in the indium tin oxide (ITO) front contact are found to limit the fill factor of the large devices. We use combined light-beam induced current (LBIC) and photoluminescence (PL) mapping as a powerful characterization tool for NW photovoltaic devices. From the LBIC and PL maps, local defects can be identified on the fully processed devices.</p>}}, author = {{Alcer, David and Hrachowina, Lukas and Hessman, Dan and Borgström, Magnus T.}}, issn = {{0957-4484}}, keywords = {{InP; light-beam induced current (LBIC); nanowire photovoltaics; photoluminescence (PL) mapping}}, language = {{eng}}, month = {{07}}, number = {{29}}, publisher = {{IOP Publishing}}, series = {{Nanotechnology}}, title = {{Processing and characterization of large area InP nanowire photovoltaic devices}}, url = {{http://dx.doi.org/10.1088/1361-6528/accc37}}, doi = {{10.1088/1361-6528/accc37}}, volume = {{34}}, year = {{2023}}, }