Optimizing ZnO nanoparticle surface for bulk heterojunction hybrid solar cells
(2013) In Solar Energy Materials and Solar Cells 118. p.43-47- Abstract
- The performance of hybrid solar cells composed of polymer and ZnO is mainly hindered by the defects of ZnO. Here, we investigate the effects of ZnO nanoparticle surface modification with poly(ethylene oxide) (PEO) on the performance of bulk heterojunction hybrid solar cells based on poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and ZnO nanoparticles. The reference device using ZnO nanoparticles as electron acceptor shows an open-circuit voltage (V-OC) of 0.83 V, a short-circuit current J(SC)) of 3.00 mA/cm(2), a fill factor (FF) of 0.46 and a power conversion efficiency (PCE) of 1.15%. After modification with very small amount of PEO, the PCE will be enhanced, which is attributed to less surface traps of ZnO... (More)
- The performance of hybrid solar cells composed of polymer and ZnO is mainly hindered by the defects of ZnO. Here, we investigate the effects of ZnO nanoparticle surface modification with poly(ethylene oxide) (PEO) on the performance of bulk heterojunction hybrid solar cells based on poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and ZnO nanoparticles. The reference device using ZnO nanoparticles as electron acceptor shows an open-circuit voltage (V-OC) of 0.83 V, a short-circuit current J(SC)) of 3.00 mA/cm(2), a fill factor (FF) of 0.46 and a power conversion efficiency (PCE) of 1.15%. After modification with very small amount of PEO, the PCE will be enhanced, which is attributed to less surface traps of ZnO nanoparticles with PEO modification. With optimized PEO (0.05%) modified ZnO nanoparticles as electron acceptors, the device typically shows a V-OC of 0.86 V, a J(SC) of 3.84 mA/cm(2), a FF of 0.51 and a PCE of 1.68% due to less recombination loss of carriers, smaller series resistance, and improved electrical coupling between ZnO nanoparticle and MEH-PPV. However, further increase of PEO content to 0.3% will deteriorate device performance. (C) 2013 Elsevier B.V. All rights reserved. (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/4158040
- author
- Shao, Shuyan ; Zheng, Kaibo LU ; Zidek, Karel LU ; Chabera, Pavel LU ; Pullerits, Tönu LU and Zhang, Fengling
- organization
- publishing date
- 2013
- type
- Contribution to journal
- publication status
- published
- subject
- keywords
- Hybrid solar cells, Surface modification, Trap, ZnO
- in
- Solar Energy Materials and Solar Cells
- volume
- 118
- pages
- 43 - 47
- publisher
- Elsevier
- external identifiers
-
- wos:000325905000007
- scopus:84883385605
- ISSN
- 0927-0248
- DOI
- 10.1016/j.solmat.2013.07.046
- language
- English
- LU publication?
- yes
- additional info
- The information about affiliations in this record was updated in December 2015. The record was previously connected to the following departments: Chemical Physics (S) (011001060)
- id
- 01f7be49-c996-4458-9034-dd095e89de1b (old id 4158040)
- date added to LUP
- 2016-04-01 14:16:33
- date last changed
- 2023-11-13 05:09:04
@article{01f7be49-c996-4458-9034-dd095e89de1b, abstract = {{The performance of hybrid solar cells composed of polymer and ZnO is mainly hindered by the defects of ZnO. Here, we investigate the effects of ZnO nanoparticle surface modification with poly(ethylene oxide) (PEO) on the performance of bulk heterojunction hybrid solar cells based on poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and ZnO nanoparticles. The reference device using ZnO nanoparticles as electron acceptor shows an open-circuit voltage (V-OC) of 0.83 V, a short-circuit current J(SC)) of 3.00 mA/cm(2), a fill factor (FF) of 0.46 and a power conversion efficiency (PCE) of 1.15%. After modification with very small amount of PEO, the PCE will be enhanced, which is attributed to less surface traps of ZnO nanoparticles with PEO modification. With optimized PEO (0.05%) modified ZnO nanoparticles as electron acceptors, the device typically shows a V-OC of 0.86 V, a J(SC) of 3.84 mA/cm(2), a FF of 0.51 and a PCE of 1.68% due to less recombination loss of carriers, smaller series resistance, and improved electrical coupling between ZnO nanoparticle and MEH-PPV. However, further increase of PEO content to 0.3% will deteriorate device performance. (C) 2013 Elsevier B.V. All rights reserved.}}, author = {{Shao, Shuyan and Zheng, Kaibo and Zidek, Karel and Chabera, Pavel and Pullerits, Tönu and Zhang, Fengling}}, issn = {{0927-0248}}, keywords = {{Hybrid solar cells; Surface modification; Trap; ZnO}}, language = {{eng}}, pages = {{43--47}}, publisher = {{Elsevier}}, series = {{Solar Energy Materials and Solar Cells}}, title = {{Optimizing ZnO nanoparticle surface for bulk heterojunction hybrid solar cells}}, url = {{http://dx.doi.org/10.1016/j.solmat.2013.07.046}}, doi = {{10.1016/j.solmat.2013.07.046}}, volume = {{118}}, year = {{2013}}, }