Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

CFD investigation of the effects of different diluents on the emissions in a swirl stabilized premixed combustion system

Engdar, Ulf LU ; Gabrielsson, Rolf LU ; Hermann, Fredrik LU and Klingmann, Jens LU (2005) ASME Turbo Expo 2005 - Gas Turbie Technology: Focus for the Future 2. p.507-516
Abstract
Recently, new cycles for power generation, such as wet cycles and cycles for CO<sub>2</sub> capture, have gained increasing interest. These new cycles use some sort of dilution in the air/fuel mixture, e.g. steam or CO<sub>2</sub>. Gas turbine cycles using LCV gases can also be said to fit this description. Almost all modern gas turbines use a lean premixed combustion system, since it combines low NO<sub>X</sub> emissions with high combustion efficiency. The main objective of this paper is to study the influence of different diluents on the NO<sub>X</sub> and CO emissions at different inlet temperature, equivalence ratio, pressure and mass flow. The studied combustor was a premixed swirl... (More)
Recently, new cycles for power generation, such as wet cycles and cycles for CO<sub>2</sub> capture, have gained increasing interest. These new cycles use some sort of dilution in the air/fuel mixture, e.g. steam or CO<sub>2</sub>. Gas turbine cycles using LCV gases can also be said to fit this description. Almost all modern gas turbines use a lean premixed combustion system, since it combines low NO<sub>X</sub> emissions with high combustion efficiency. The main objective of this paper is to study the influence of different diluents on the NO<sub>X</sub> and CO emissions at different inlet temperature, equivalence ratio, pressure and mass flow. The studied combustor was a premixed swirl stabilized combustor with optical access and emission sampling equipment. The combustor uses Danish natural gas as its main fuel. Computational fluid dynamics (CFD) has been employed to perform the investigations. It is common knowledge that turbulence models based on the Buissinesq assumption are not generally capable of handling a highly swirling flow in a correct way. Therefore, a differential Reynolds stress model (DRSM) has been employed for modeling of the turbulence. The turbulent combustion has been modeled with the level-set flamelet library approach (FLA). In this approach a laminar flamelet is linked to turbulent flow field via a non-reacting scalar G and its variance. The laminar flamelet is modeled with separate code. This code solves the combustion development with a detailed reaction mechanism for a laminar, non-stretched and premised one-dimensional flame. This is of great importance when emissions are to be predicted. All fluid dynamics computations were performed with the commercial CFD code Star-CD, version 3.20, where the FLA combustion model was implemented through Fortran based user subroutines. The computed flow field was validated against experimental data during non-reaction flow conditions. The computations showed good agreement with the experimental data. The computed CO and NO<sub>X</sub> emissions showed the same trends as the experimental data for the reacting case with an undiluted flame, when the equivalence ratio was altered. The computed emissions were used to build up an emission map for different dilutions during different operation conditions. Copyright (Less)
Please use this url to cite or link to this publication:
author
; ; and
organization
publishing date
type
Chapter in Book/Report/Conference proceeding
publication status
published
subject
keywords
Inlet temperature, Turbulent combustion, Premixed swirl, Wet cycles
host publication
Proceedings of the ASME Turbo Expo
volume
2
pages
507 - 516
publisher
American Society Of Mechanical Engineers (ASME)
conference name
ASME Turbo Expo 2005 - Gas Turbie Technology: Focus for the Future
conference location
Reno-Tahoe, NV, United States
conference dates
2005-06-06 - 2005-06-09
external identifiers
  • wos:000243376400048
  • scopus:27744607392
language
English
LU publication?
yes
id
f5a30e86-b035-4691-be34-3e0b592bacbd (old id 616013)
date added to LUP
2016-04-04 12:23:31
date last changed
2022-03-16 00:45:59
@inproceedings{f5a30e86-b035-4691-be34-3e0b592bacbd,
  abstract     = {{Recently, new cycles for power generation, such as wet cycles and cycles for CO&lt;sub&gt;2&lt;/sub&gt; capture, have gained increasing interest. These new cycles use some sort of dilution in the air/fuel mixture, e.g. steam or CO&lt;sub&gt;2&lt;/sub&gt;. Gas turbine cycles using LCV gases can also be said to fit this description. Almost all modern gas turbines use a lean premixed combustion system, since it combines low NO&lt;sub&gt;X&lt;/sub&gt; emissions with high combustion efficiency. The main objective of this paper is to study the influence of different diluents on the NO&lt;sub&gt;X&lt;/sub&gt; and CO emissions at different inlet temperature, equivalence ratio, pressure and mass flow. The studied combustor was a premixed swirl stabilized combustor with optical access and emission sampling equipment. The combustor uses Danish natural gas as its main fuel. Computational fluid dynamics (CFD) has been employed to perform the investigations. It is common knowledge that turbulence models based on the Buissinesq assumption are not generally capable of handling a highly swirling flow in a correct way. Therefore, a differential Reynolds stress model (DRSM) has been employed for modeling of the turbulence. The turbulent combustion has been modeled with the level-set flamelet library approach (FLA). In this approach a laminar flamelet is linked to turbulent flow field via a non-reacting scalar G and its variance. The laminar flamelet is modeled with separate code. This code solves the combustion development with a detailed reaction mechanism for a laminar, non-stretched and premised one-dimensional flame. This is of great importance when emissions are to be predicted. All fluid dynamics computations were performed with the commercial CFD code Star-CD, version 3.20, where the FLA combustion model was implemented through Fortran based user subroutines. The computed flow field was validated against experimental data during non-reaction flow conditions. The computations showed good agreement with the experimental data. The computed CO and NO&lt;sub&gt;X&lt;/sub&gt; emissions showed the same trends as the experimental data for the reacting case with an undiluted flame, when the equivalence ratio was altered. The computed emissions were used to build up an emission map for different dilutions during different operation conditions. Copyright}},
  author       = {{Engdar, Ulf and Gabrielsson, Rolf and Hermann, Fredrik and Klingmann, Jens}},
  booktitle    = {{Proceedings of the ASME Turbo Expo}},
  keywords     = {{Inlet temperature; Turbulent combustion; Premixed swirl; Wet cycles}},
  language     = {{eng}},
  pages        = {{507--516}},
  publisher    = {{American Society Of Mechanical Engineers (ASME)}},
  title        = {{CFD investigation of the effects of different diluents on the emissions in a swirl stabilized premixed combustion system}},
  volume       = {{2}},
  year         = {{2005}},
}