Production and Materials Engineering
301 – 400 of 536
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2014
-
Mark
A Business Case Tool as Decision Support in Early Production Location Project Stages
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
High Performance Manufacturing of Advanced Thin Plates ─ Forming of Titanium and Stainless Steel Materials
2014)(
- Thesis › Doctoral thesis (monograph)
-
Mark
Characterizing the mechanical properties of skin-core structure in polymer molding process by nanoindentation
2014) Swedish Production Symposium, 2014(
- Contribution to conference › Paper, not in proceeding
-
Mark
Dry or Wet Gear Hobbing a Case Study
2014) Management of Technology Step to Sustainable Production – MOTSP 2014(
- Contribution to conference › Paper, not in proceeding
-
Mark
EFFECTS OF COOLING RATE AND SILICON CONTENT ON AL/SICp MMC
2014) Swedish Production Symposium, 2014(
- Contribution to conference › Paper, not in proceeding
- 2013
-
Mark
Conditions for and development of an information technology-support tool for manufacturing cost calculations and analyses
(
- Contribution to journal › Article
-
Mark
Modeling effect of surface roughness on nanoindentation tests
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Wear mechanisms of silicon carbide-whisker-reinforced alumina (Al2O3-SiCw) cutting tools when high-speed machining aged Alloy 718
(
- Contribution to journal › Article
-
Mark
Sustainable machining through increasing the cutting tool utilization
(
- Contribution to journal › Article
-
Mark
The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A method for identification of geometrical tool changes during machining of titanium alloy Ti6Al4V
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of whisker-reinforced alumina, coated and uncoated PCBN tools when high-speed turning aged Inconel 718
(
- Contribution to journal › Article
-
Mark
The influence of microstructure and mechanical properties on the machinability of martensitic and bainitic prehardened mould steels
(
- Contribution to journal › Article
-
Mark
A novel experimental research on vibration characteristics of the running high-speed motorized spindles
(
- Contribution to journal › Article
-
Mark
Effects of Cutting Speed when Turning Age Hardened Inconel 718 with PCBN Tools of Binderless and Low-CBN Grades
(
- Contribution to journal › Article
-
Mark
The influence of tool steel microstructure on friction in sheet metal forming
(
- Contribution to journal › Article
-
Mark
Dynamic Stability of the Process of Turning Nickel Superalloys Using a Toolholder Produced by Selective Laser Sintering
(
- Contribution to journal › Article
-
Mark
General Conception of Polar Diagrams for the Evaluation of the Potential Machinability of Workpiece Materials
(
- Contribution to journal › Article
-
Mark
Influence of the tool surface micro topography on the tribological characteristics in metal cutting - Part II Theoretical calculations of contact conditions
(
- Contribution to journal › Article
-
Mark
Influence of the tool surface micro topography on the tribological characteristics in metal cutting – Part I Experimental observations of contact conditions
(
- Contribution to journal › Article
-
Mark
A modular framework for evaluation of electrical machine production costs
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Costs of inbound logistics – Towards a decision support model for production system design
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Verification of sheet metal forming simulation of advanced thin plate parts using a first order friction model
2013) Towards Zero Failure Production Methods by Advanced Modeling Techniques and a Process Integrated Virtual Control, IDDRG 2013 International Conference(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Resource Consumption in Additive Manufacturing with a PSS Approach
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A step towards sustainable machining through increasing the cutting tool utilization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Extreme Hardness Achievements in Binderless Cubic Boron Nitride Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the Machinability of Ductile and Strain Hardening Materials - Models and Methods for Analyzing Machinability
2013)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Tool wear and tool life of conventional pcBN, binderless cBN and wBN-cBN tool materials in continuous finish hard turning of cold work tool steel
2013) 16-th International Conference Rock- and materials-processing tools: engineering, technology and application(
- Contribution to conference › Paper, not in proceeding
-
Mark
Influence of Dry Cut and Tool Wear on Residual Stresses in High Speed Machining of Nickel-Based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718
2013) The 13th International Conference on Fracture (ICF13)(
- Contribution to conference › Paper, not in proceeding
-
Mark
ECCI and EBSD study of subsurface damages in high speed turning of inconel 718 under different tools and machining parameters
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2012
-
Mark
Soft magnetic moldable composites: Properties and applications
(
- Contribution to journal › Article
-
Mark
Analytical Calculation of the True Equivalent Chip Thickness for Cutting Tools and its Influence on the Calculated Tool Life
(
- Contribution to journal › Article
-
Mark
Methodology for evaluating effects of material characteristics on machinability-theory and statistics-based modelling applied on Alloy 718
(
- Contribution to journal › Article
-
Mark
Cost Based Process Optimization by Incrementally Changing the Cutting Data during Sustainable Machining
(
- Contribution to journal › Article
-
Mark
Analytical Calculation of the Ra Surface Roughness during Turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The affect of Johnson Cook plasticity parameters on the cutting process parameters
2012) Swedish Production Symposium, 2012(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cost drivers and production limitations for electrified vehicle traction components
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Sustainable Approach for Milling of Duplex Stainless Steel by Increasing the Cutting Tool Utilization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Alternative production process for electric machine windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The scale of permanent magnet materials for automotive traction motors
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
New manufacturing methods for electric motors using different soft magnetic material combinations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and evaluation of moulded powder-core machine for in-wheel drive application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Identification of Subsurface Deformation in Machining of Inconel 718
2012) International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011) In Applied Mechanics and Materials 117-119. p.1681-1688(
- Contribution to journal › Article
-
Mark
Tooth Deviations of an Involute Helical Gear Manufactured in a Simulated Hobbing Process with Introduced Errors
2012) 1st International Conference on Virtual Machining Process Technology(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
Comprehensive dynamic analysis of vibration and stability when ultrahigh speed turning Inconel 718 with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
(
- Contribution to journal › Article
-
Mark
An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
(
- Contribution to journal › Article
-
Mark
Dynamic manufacturing costs — Describing the dynamic behavior of downtimes from a cost perspective
(
- Contribution to journal › Article
-
Mark
Simulation of indenter geometry effects in nanoindentation
2012) Nordic Seminar in Computational Mechanics, NSCM-25(
- Contribution to conference › Paper, not in proceeding
-
Mark
Characterization of mechanical properties of machined surface by nanoindentation — Part 1: Simulation of indenter geometry effects
2012) Swedish Production Symposium, 2012(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Manufacturing costs and Degree of Occupancy Based on the Principle of Characteristic Parts
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
Analysis of Current Paths in Induction Heating of flat sheets using single sided Longitudinal Field Inductors
2012) 15th International Conference on Electromagnetic Field Computation(
- Contribution to conference › Paper, not in proceeding
-
Mark
NEXT STEP in Cost-based Sustainable Production Development - Cases from different Production Operations
2012) International Conference on Advances in Manufacturing and Materials Engineering(
- Contribution to conference › Paper, not in proceeding
-
Mark
Cost-conscious manufacturing – Models and methods for analyzing present and future performance from a cost perspective
2012)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Laminated winding with rapid cooling capability for electrical machines
2012) International Conference for Inductive and Electromagnetic Components, Systems and Devices including Manufacturing and Processing (INDUCTICA 2012)(
- Contribution to conference › Paper, not in proceeding
-
Mark
Business case as a decision support when relocating manufacturing
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
A production performance analysis regarding downtime and downtime pattern
2012) 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
A method for fast characterization of power efficiency in induction heating processes
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling Subsurface Deformation in High Speed Machining of Inconel 718
2012) 1st CIRP International Conference on Virtual Machining Process Technology(
- Contribution to conference › Paper, not in proceeding
-
Mark
Improved Tribotesting for Sheet Metal Forming
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A cost model for determining an optimal automation level in discrete batch manufacturing
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2011
-
Mark
Relations between Volume Flexibility and Part Cost in Assembly Lines
2011) 20th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) 27. p.669-673(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Characterization of White Layer Generated when Turning Aged Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Improved tool wear properties in sheet metal forming using Carbide steel, a novel abrasion resistant cast material
(
- Contribution to journal › Article
-
Mark
Experimental studies of cutting force variation in face milling
(
- Contribution to journal › Article
-
Mark
Evaluating the Machinability of Inconel 718 Using Polar Diagrams
(
- Contribution to journal › Article
-
Mark
A numerical and experimental investigation of the deformation zones and the corresponding cutting forces in orthogonal cutting
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Study of the Minimum Chip Thickness during the Machining of Duplex Stainless Steel
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Managing production performance with Overall equipment Efficiency (OEE) - implementation issues and common pitfalls
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A new concept of coil design for industrial induction heating
2011) Swedish Production Symposium 2011(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 2: Variation of tool angles along the edge line
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Achieving sustainable production through increased utilization of production resources
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling tool life in the machining of strain-hardening material - Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
A fully coupled thermo-mechanical simulation model for orthogonal cutting-formulation and validation
2011) In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225(10). p.1735-1745(
- Contribution to journal › Article
-
Mark
On the surface quality of Alloy 718 in finishing turning with CBN cutting tools
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Cost Optimization by Incremental Production Improvements of Metal Cutting Operations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability variations in Alloy 718 —With focus on machining of turbine components
2011) In LUTMDN(TMMV-1062)/1-108(2011)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Study on work-hardening phenomena in machining aged Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Industrial heating using energy efficient induction technology
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability of duplex stainless steels - A study with focus on the tool wear behaviour
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling of maintenance costs
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
The influence of tool temperature on tribological conditions in sheet metal forming
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Combining Overall equipment Efficiency (OEE) and productivity measures as drivers for production improvements
(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 1: Chip area parameters under both side and back rake angles variation
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Development of a Novel Superfinishing Apparatus for Controlled Texturing of Functional Surfaces
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Process induced subsurface deformation of Alloy 718 in relation to different cutting conditions
(
- Contribution to conference › Paper, not in proceeding
-
Mark
The development of NEXT STEP beyond Lean Production - The link between technology and economics with focus on sustainable developments
2011) 2011 International Conference on Applied Mechanics, Materials and Manufacturing(
- Contribution to conference › Paper, not in proceeding
-
Mark
Dynamic Manufacturing Costs - Describing the Dynamic Behavior of Downtimes from a Cost Perspective
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Electrical isolation of coils in Soft Magnetic Composite applications
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Analytical and Experimental Determination of the Ra Surface Roughness during Turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2010
-
Mark
Improving waviness of bore in precision hard turning by pressurized coolant
(
- Contribution to journal › Article
-
Mark
Evaluating the machinability of Inconel 718 using polar diagrams
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability prediction of workpiece material with a diagraph method
2010) 2009 International Conference on Manufacturing Science and Engineering, ICMSE 2009 In Advanced Materials Research 97-101. p.2072-2075(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
FE analyses of orthogonal cutting
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Prototype based study of different winding configurations with SM2C core
2010) XIX International Conference on Electrical Machines (ICEM), 2010(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Indication of cracking during pressing of advanced thin plates using an AE-based monitoring system
2010) Tools and Technologies for the processing of ultra high strength steels: IDDRG 2010 International Conference p.925-934(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding