Skip to main content

Lund University Publications

LUND UNIVERSITY LIBRARIES

Investigation on cutting fluid use in finish milling of polylactide (PLA) 3D-printed parts

Lorenzoni, Margaux ; Spitaels, Laurent ; Rivière-Lorphèvre, Edouard ; Odent, Jérémy ; M'Saoubi, Rachid LU ; Cloëz, Liam ; Fontaine, Michaël and Ducobu, François (2025) 20th CIRP Conference on Modeling of Machining Operations in Mons, CIRP CMMO 2025 133. p.656-661
Abstract

Fused Filament Fabrication (FFF) is an additive manufacturing process based on Material Extrusion (MEX) of polymeric filament. This manufacturing technology is commonly used for personalized production applications and prototyping, allowing to obtain customized parts with complex geometries at a low cost. However, this production technique has its limitations regarding dimensional accuracy and surface roughness of the final parts. To overcome these limitations, finish milling is considered to be a promising technique as it is widely used for metallic parts. Yet, the specific thermal properties of polymers such as low thermal conductivity and low melting temperature are adding a challenge in the determination of optimal cutting... (More)

Fused Filament Fabrication (FFF) is an additive manufacturing process based on Material Extrusion (MEX) of polymeric filament. This manufacturing technology is commonly used for personalized production applications and prototyping, allowing to obtain customized parts with complex geometries at a low cost. However, this production technique has its limitations regarding dimensional accuracy and surface roughness of the final parts. To overcome these limitations, finish milling is considered to be a promising technique as it is widely used for metallic parts. Yet, the specific thermal properties of polymers such as low thermal conductivity and low melting temperature are adding a challenge in the determination of optimal cutting conditions. In this context, the use of cutting fluid could be the key to keep the material from melting during milling. Therefore, this paper proposes to compare the impact of using a compressed air flow to dry conditions on the cutting forces and the surface quality obtained on 3D-printed polylactide (PLA) parts. The qualification test of the tool-material couple standard (NF E 66-520-6) will be used as a guideline to determine the relevance of cutting fluid use for cutting conditions varying around an operating point. Moreover, simulated cutting forces using a mechanistic model will be compared to experimental data to evaluate the applicability of the model.

(Less)
Please use this url to cite or link to this publication:
author
; ; ; ; ; ; and
organization
publishing date
type
Chapter in Book/Report/Conference proceeding
publication status
published
subject
keywords
Additive manufacturing, Cutting fluid, Finishing, Milling, Modeling, PLA, Polylactic acid
host publication
Procedia CIRP
volume
133
pages
6 pages
conference name
20th CIRP Conference on Modeling of Machining Operations in Mons, CIRP CMMO 2025
conference location
Mons, Belgium
conference dates
2025-05-22 - 2025-05-23
external identifiers
  • scopus:105003204146
DOI
10.1016/j.procir.2025.02.112
language
English
LU publication?
yes
id
768f5deb-dad7-4c90-8ae8-51fb75eae572
date added to LUP
2025-09-24 13:50:21
date last changed
2025-09-24 13:51:23
@inproceedings{768f5deb-dad7-4c90-8ae8-51fb75eae572,
  abstract     = {{<p>Fused Filament Fabrication (FFF) is an additive manufacturing process based on Material Extrusion (MEX) of polymeric filament. This manufacturing technology is commonly used for personalized production applications and prototyping, allowing to obtain customized parts with complex geometries at a low cost. However, this production technique has its limitations regarding dimensional accuracy and surface roughness of the final parts. To overcome these limitations, finish milling is considered to be a promising technique as it is widely used for metallic parts. Yet, the specific thermal properties of polymers such as low thermal conductivity and low melting temperature are adding a challenge in the determination of optimal cutting conditions. In this context, the use of cutting fluid could be the key to keep the material from melting during milling. Therefore, this paper proposes to compare the impact of using a compressed air flow to dry conditions on the cutting forces and the surface quality obtained on 3D-printed polylactide (PLA) parts. The qualification test of the tool-material couple standard (NF E 66-520-6) will be used as a guideline to determine the relevance of cutting fluid use for cutting conditions varying around an operating point. Moreover, simulated cutting forces using a mechanistic model will be compared to experimental data to evaluate the applicability of the model.</p>}},
  author       = {{Lorenzoni, Margaux and Spitaels, Laurent and Rivière-Lorphèvre, Edouard and Odent, Jérémy and M'Saoubi, Rachid and Cloëz, Liam and Fontaine, Michaël and Ducobu, François}},
  booktitle    = {{Procedia CIRP}},
  keywords     = {{Additive manufacturing; Cutting fluid; Finishing; Milling; Modeling; PLA; Polylactic acid}},
  language     = {{eng}},
  pages        = {{656--661}},
  title        = {{Investigation on cutting fluid use in finish milling of polylactide (PLA) 3D-printed parts}},
  url          = {{http://dx.doi.org/10.1016/j.procir.2025.02.112}},
  doi          = {{10.1016/j.procir.2025.02.112}},
  volume       = {{133}},
  year         = {{2025}},
}