Carbon Fiber Composite Materials in Modern Day Automotive Production Lines – A Case Study
Petersson, Håkan LU ; Motte, Damien LU
and Bjärnemo, Robert
LU
(2013)
International Mechanical Engineering Congress & Exposition - IMECE'13
2A.
p.02-037
- Abstract
- New and innovative production equipment can be developed by introducing lightweight materials in modern day automotive industry production lines. The properties of these new materials are expected to result in improved ergonomics, energy savings, increased flexibility and more robust equipment, which in the end will result in enhanced productivity. Carbon composite materials are one such alternative that has excellent material properties. These properties are well documented, and the market for carbon composite materials is growing in many areas such as commercial aircrafts, sporting goods and wind turbines. However, when studying the use of carbon composite materials for production equipment in the automotive industry, it was found that... (More)
- New and innovative production equipment can be developed by introducing lightweight materials in modern day automotive industry production lines. The properties of these new materials are expected to result in improved ergonomics, energy savings, increased flexibility and more robust equipment, which in the end will result in enhanced productivity. Carbon composite materials are one such alternative that has excellent material properties. These properties are well documented, and the market for carbon composite materials is growing in many areas such as commercial aircrafts, sporting goods and wind turbines. However, when studying the use of carbon composite materials for production equipment in the automotive industry, it was found that there were few, if any, such examples.
This paper focuses on innovative ways of making carbon composite materials available for designing automotive industry production equipment by introducing a design and material concept that combines flexibility, relatively low costs and high functionality. By reducing the weight by 60%, it was obvious that the operators were very positive to the new design. But just as important as the improvement of the ergonomic feature, the combination of low weight and material properties resulted in a more robust design and a more stable process of operation. The two main designs (two versions of the steel-based design were constructed) were developed sequentially, making it difficult to compare development costs since knowledge migrated from one project to the next. In this study, the gripper was manufactured in both carbon composite material and steel. The different designs were compared with reference to design costs, functionality, robustness, product costs and ergonomics. The study clearly shows that the composite material represents a favorable alternative to conventional materials, as the system combines superior properties without significantly increasing the cost of the equipment. This paper describes the approach in detail. (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/4191976
- author
- Petersson, Håkan
LU
; Motte, Damien
LU
and Bjärnemo, Robert
LU
- organization
- publishing date
- 2013
- type
- Chapter in Book/Report/Conference proceeding
- publication status
- published
- subject
- keywords
- Machine Design, Maskinkonstruktion
- host publication
- Proceedings of the International Mechanical Engineering Congress & Exposition - IMECE'13
- volume
- 2A
- article number
- IMECE2013-62272
- pages
- 8 pages
- publisher
- American Society Of Mechanical Engineers (ASME)
- conference name
- International Mechanical Engineering Congress & Exposition - IMECE'13
- conference dates
- 2013-11-15 - 2013-11-21
- external identifiers
-
- wos:000359682200037
- scopus:84903468185
- ISBN
- 978-0-7918-5618-5
- DOI
- 10.1115/IMECE2013-62272
- language
- English
- LU publication?
- yes
- id
- f1809740-3e9b-46a4-8856-e216a1f506e0 (old id 4191976)
- date added to LUP
- 2016-04-04 11:14:39
- date last changed
- 2023-11-16 01:48:59
@inproceedings{f1809740-3e9b-46a4-8856-e216a1f506e0,
abstract = {{New and innovative production equipment can be developed by introducing lightweight materials in modern day automotive industry production lines. The properties of these new materials are expected to result in improved ergonomics, energy savings, increased flexibility and more robust equipment, which in the end will result in enhanced productivity. Carbon composite materials are one such alternative that has excellent material properties. These properties are well documented, and the market for carbon composite materials is growing in many areas such as commercial aircrafts, sporting goods and wind turbines. However, when studying the use of carbon composite materials for production equipment in the automotive industry, it was found that there were few, if any, such examples. <br/><br>
<br/><br>
This paper focuses on innovative ways of making carbon composite materials available for designing automotive industry production equipment by introducing a design and material concept that combines flexibility, relatively low costs and high functionality. By reducing the weight by 60%, it was obvious that the operators were very positive to the new design. But just as important as the improvement of the ergonomic feature, the combination of low weight and material properties resulted in a more robust design and a more stable process of operation. The two main designs (two versions of the steel-based design were constructed) were developed sequentially, making it difficult to compare development costs since knowledge migrated from one project to the next. In this study, the gripper was manufactured in both carbon composite material and steel. The different designs were compared with reference to design costs, functionality, robustness, product costs and ergonomics. The study clearly shows that the composite material represents a favorable alternative to conventional materials, as the system combines superior properties without significantly increasing the cost of the equipment. This paper describes the approach in detail.}},
author = {{Petersson, Håkan and Motte, Damien and Bjärnemo, Robert}},
booktitle = {{Proceedings of the International Mechanical Engineering Congress & Exposition - IMECE'13}},
isbn = {{978-0-7918-5618-5}},
keywords = {{Machine Design; Maskinkonstruktion}},
language = {{eng}},
pages = {{02--037}},
publisher = {{American Society Of Mechanical Engineers (ASME)}},
title = {{Carbon Fiber Composite Materials in Modern Day Automotive Production Lines – A Case Study}},
url = {{https://lup.lub.lu.se/search/files/5728098/4191990.pdf}},
doi = {{10.1115/IMECE2013-62272}},
volume = {{2A}},
year = {{2013}},
}