Model-Based Control of Gasoline Partially Premixed Combustion
(2015) In Research Reports TFRT-3268- Abstract
- Partially Premixed Combustion (PPC) is an internal combustion engine concept that aims to yield low NOx and soot emission levels together with high engine efficiency. PPC belongs to the class of low temperature combustion concepts where the ignition delay is prolonged in order to promote the air-fuel-mixture homogeneity in the combustion chamber at the start of combustion. A more homogeneous combustion process in combination with high exhaust-gas recirculation (EGR) ratios gives lower combustion temperatures and thus decreased NOx and soot formation. The ignition delay is mainly controlled by temperature, gas-mixture composition, fuel type and fuel-injection timing.
It has been shown that PPC run on gasoline fuel can... (More) - Partially Premixed Combustion (PPC) is an internal combustion engine concept that aims to yield low NOx and soot emission levels together with high engine efficiency. PPC belongs to the class of low temperature combustion concepts where the ignition delay is prolonged in order to promote the air-fuel-mixture homogeneity in the combustion chamber at the start of combustion. A more homogeneous combustion process in combination with high exhaust-gas recirculation (EGR) ratios gives lower combustion temperatures and thus decreased NOx and soot formation. The ignition delay is mainly controlled by temperature, gas-mixture composition, fuel type and fuel-injection timing.
It has been shown that PPC run on gasoline fuel can provide sufficient ignition delays in conventional compression-ignition engines. The PPC concept differs from conventional direct-injection diesel combustion because of its increased sensitivity to intake conditions, its decreased combustion-phasing controllability and its high pressure-rise rates related to premixed combustion, this puts higher demands on the engine control system. This thesis investigates model predictive control (MPC) of PPC with the use of in-cylinder pressure sensors. Online heat-release analysis is used for the detection of the combustion phasing and the ignition delay that function as combustion-feedback signals. It is shown that the heat-release analysis could be automatically calibrated using nonlinear estimation methods, the heat-release analysis is also a central part of a presented online pressure-prediction method which can be used for combustion-timing optimization.
Low-order autoignition models are studied and compared for the purpose of model-based control of the ignition-delay, the results show that simple mathematical models are sufficient when anipulating the intake-manifold conditions. The results also show that the relation between the injection timing and the ignition delay is not completely captured by these types of models when the injection timing is close to top-dead-center. Simultaneous control of the ignition delay and the combustion phasing using a dual-path EGR system, thermal management and fuel injection timings is studied and a control design is presented and evaluated experimentally.
Closed-loop control of the pressure-rise rate using a pilot fuel injection is also studied and the multiple fuel-injection properties are characterized experimentally. Experiments show that the main-fuel injection controls the combustion timing and that the pilot-injection fuel could be used to decrease the main fuel injection ignition delay and thus the pressure-rise rate. The controllability of the pressure-rise rate was shown to be higher when the pilot injection was located close to the main-fuel injection. A pressure-rise-rate controller is presented and evaluated experimentally.
All experiments presented in this thesis were conducted on a Scania D13 production engine with a modified gas-exchange system, the fuel used was a mixture of 80 % gasoline and 20 % N-heptane (by volume). (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/8301285
- author
- Ingesson, Gabriel LU
- supervisor
-
- Rolf Johansson LU
- Per Tunestål LU
- Bo Bernhardsson LU
- organization
- publishing date
- 2015
- type
- Thesis
- publication status
- published
- subject
- keywords
- Pressure-Sensor Feedback, Model Predictive Control, Model-Based Controller Design, Partially Premixed Combustion
- in
- Research Reports TFRT-3268
- pages
- 121 pages
- publisher
- Department of Automatic Control, Lund Institute of Technology, Lund University
- ISSN
- 0280-5316
- project
- ELLIIT-sched
- KCFP, Closed-Loop Combustion Control
- language
- English
- LU publication?
- yes
- id
- cee20a01-bd99-4334-a9fe-a98b45eb9174 (old id 8301285)
- date added to LUP
- 2016-04-01 14:55:17
- date last changed
- 2018-11-21 20:31:33
@misc{cee20a01-bd99-4334-a9fe-a98b45eb9174,
abstract = {{Partially Premixed Combustion (PPC) is an internal combustion engine concept that aims to yield low NOx and soot emission levels together with high engine efficiency. PPC belongs to the class of low temperature combustion concepts where the ignition delay is prolonged in order to promote the air-fuel-mixture homogeneity in the combustion chamber at the start of combustion. A more homogeneous combustion process in combination with high exhaust-gas recirculation (EGR) ratios gives lower combustion temperatures and thus decreased NOx and soot formation. The ignition delay is mainly controlled by temperature, gas-mixture composition, fuel type and fuel-injection timing. <br/><br>
<br/><br>
It has been shown that PPC run on gasoline fuel can provide sufficient ignition delays in conventional compression-ignition engines. The PPC concept differs from conventional direct-injection diesel combustion because of its increased sensitivity to intake conditions, its decreased combustion-phasing controllability and its high pressure-rise rates related to premixed combustion, this puts higher demands on the engine control system. This thesis investigates model predictive control (MPC) of PPC with the use of in-cylinder pressure sensors. Online heat-release analysis is used for the detection of the combustion phasing and the ignition delay that function as combustion-feedback signals. It is shown that the heat-release analysis could be automatically calibrated using nonlinear estimation methods, the heat-release analysis is also a central part of a presented online pressure-prediction method which can be used for combustion-timing optimization.<br/><br>
<br/><br>
Low-order autoignition models are studied and compared for the purpose of model-based control of the ignition-delay, the results show that simple mathematical models are sufficient when anipulating the intake-manifold conditions. The results also show that the relation between the injection timing and the ignition delay is not completely captured by these types of models when the injection timing is close to top-dead-center. Simultaneous control of the ignition delay and the combustion phasing using a dual-path EGR system, thermal management and fuel injection timings is studied and a control design is presented and evaluated experimentally.<br/><br>
<br/><br>
Closed-loop control of the pressure-rise rate using a pilot fuel injection is also studied and the multiple fuel-injection properties are characterized experimentally. Experiments show that the main-fuel injection controls the combustion timing and that the pilot-injection fuel could be used to decrease the main fuel injection ignition delay and thus the pressure-rise rate. The controllability of the pressure-rise rate was shown to be higher when the pilot injection was located close to the main-fuel injection. A pressure-rise-rate controller is presented and evaluated experimentally.<br/><br>
<br/><br>
All experiments presented in this thesis were conducted on a Scania D13 production engine with a modified gas-exchange system, the fuel used was a mixture of 80 % gasoline and 20 % N-heptane (by volume).}},
author = {{Ingesson, Gabriel}},
issn = {{0280-5316}},
keywords = {{Pressure-Sensor Feedback; Model Predictive Control; Model-Based Controller Design; Partially Premixed Combustion}},
language = {{eng}},
note = {{Licentiate Thesis}},
publisher = {{Department of Automatic Control, Lund Institute of Technology, Lund University}},
series = {{Research Reports TFRT-3268}},
title = {{Model-Based Control of Gasoline Partially Premixed Combustion}},
url = {{https://lup.lub.lu.se/search/files/4246420/8301313.pdf}},
year = {{2015}},
}