On Automation in Anesthesia
(2013) In PhD Thesis TFRT-1096- Abstract
- The thesis discusses closed-loop control of the hypnotic and the analgesic components of anesthesia. The objective of the work has been to develop a system which independently controls the intravenous infusion rates of the hypnotic drug propofol and analgesic drug remifentanil. The system is designed to track a reference hypnotic depth level, while maintaining adequate analgesia. This is complicated by inter-patient variability in drug sensitivity, disturbances caused foremost by surgical stimulation, and measurement noise. A commercially available monitor is used to measure the hypnotic depth of the patient, while a simple soft sensor estimates the analgesic depth. Both induction and maintenance of anesthesia are closed-loop controlled,... (More)
- The thesis discusses closed-loop control of the hypnotic and the analgesic components of anesthesia. The objective of the work has been to develop a system which independently controls the intravenous infusion rates of the hypnotic drug propofol and analgesic drug remifentanil. The system is designed to track a reference hypnotic depth level, while maintaining adequate analgesia. This is complicated by inter-patient variability in drug sensitivity, disturbances caused foremost by surgical stimulation, and measurement noise. A commercially available monitor is used to measure the hypnotic depth of the patient, while a simple soft sensor estimates the analgesic depth. Both induction and maintenance of anesthesia are closed-loop controlled, using a PID controller for propofol and a P controller for remifentanil. In order to tune the controllers, patient models have been identified from clinical data, with body mass as only biometric parameter. Care has been taken to characterize identifiability and produce models which are safe for the intended application. A scheme for individualizing the controller tuning upon completion of the induction phase of anesthesia is proposed. Practical aspects such as integrator anti-windup and loss of the measurement signal are explicitly addressed. The validity of the performance measures, most commonly reported in closed-loop anesthesia studies, is debated and a new set of measures is proposed. It is shown, both in simulation and clinically, that PID control provides a viable approach. Both results from simulations and clinical trials are presented. These results suggest that closed-loop controlled anesthesia can be provided in a safe and efficient manner, relieving the regulatory and server controller role of the anesthesiologist. However, outlier patient dynamics, unmeasurable disturbances and scenarios which are not considered in the controller synthesis, urge the presence of an anesthesiologist. Closed-loop controlled anesthesia should therefore not be viewed as a replacement of human expertise, but rather as a tool, similar to the cruise controller of a car. (Less)
Please use this url to cite or link to this publication:
https://lup.lub.lu.se/record/3919379
- author
- Soltesz, Kristian LU
- supervisor
- opponent
-
- Ionescu, Clara, Faculty of Applied Sciences, Department of Electrical Engineering, Systems and Automation, Ghent University, Belgium
- organization
- publishing date
- 2013
- type
- Thesis
- publication status
- published
- subject
- keywords
- PID conrol, medical applications
- in
- PhD Thesis TFRT-1096
- pages
- 136 pages
- publisher
- Department of Automatic Control, Lund Institute of Technology, Lund University
- defense location
- Lecture hall B, M-building, Ole Römers väg 1, Faculty of Engineering Lund University
- defense date
- 2013-09-13 10:15:00
- ISSN
- 0280-5316
- 0280-5316
- ISBN
- 978-91-7473-484-3
- project
- Anesthesia in Closed Loop
- LCCC
- language
- English
- LU publication?
- yes
- id
- b9b39df9-056a-4b88-8aa1-5bd2b9b144dd (old id 3919379)
- date added to LUP
- 2016-04-01 15:03:02
- date last changed
- 2023-12-01 11:13:26
@phdthesis{b9b39df9-056a-4b88-8aa1-5bd2b9b144dd, abstract = {{The thesis discusses closed-loop control of the hypnotic and the analgesic components of anesthesia. The objective of the work has been to develop a system which independently controls the intravenous infusion rates of the hypnotic drug propofol and analgesic drug remifentanil. The system is designed to track a reference hypnotic depth level, while maintaining adequate analgesia. This is complicated by inter-patient variability in drug sensitivity, disturbances caused foremost by surgical stimulation, and measurement noise. A commercially available monitor is used to measure the hypnotic depth of the patient, while a simple soft sensor estimates the analgesic depth. Both induction and maintenance of anesthesia are closed-loop controlled, using a PID controller for propofol and a P controller for remifentanil. In order to tune the controllers, patient models have been identified from clinical data, with body mass as only biometric parameter. Care has been taken to characterize identifiability and produce models which are safe for the intended application. A scheme for individualizing the controller tuning upon completion of the induction phase of anesthesia is proposed. Practical aspects such as integrator anti-windup and loss of the measurement signal are explicitly addressed. The validity of the performance measures, most commonly reported in closed-loop anesthesia studies, is debated and a new set of measures is proposed. It is shown, both in simulation and clinically, that PID control provides a viable approach. Both results from simulations and clinical trials are presented. These results suggest that closed-loop controlled anesthesia can be provided in a safe and efficient manner, relieving the regulatory and server controller role of the anesthesiologist. However, outlier patient dynamics, unmeasurable disturbances and scenarios which are not considered in the controller synthesis, urge the presence of an anesthesiologist. Closed-loop controlled anesthesia should therefore not be viewed as a replacement of human expertise, but rather as a tool, similar to the cruise controller of a car.}}, author = {{Soltesz, Kristian}}, isbn = {{978-91-7473-484-3}}, issn = {{0280-5316}}, keywords = {{PID conrol; medical applications}}, language = {{eng}}, publisher = {{Department of Automatic Control, Lund Institute of Technology, Lund University}}, school = {{Lund University}}, series = {{PhD Thesis TFRT-1096}}, title = {{On Automation in Anesthesia}}, url = {{https://lup.lub.lu.se/search/files/4312507/3954718.pdf}}, year = {{2013}}, }