1 – 115 of 115
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
The effect of workpiece grain size on surface integrity in orthogonal cutting of Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of cooling scheme and coating of drills on hole quality in drilling of Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2023
-
Mark
Evolution of residual stress when turning a fillet radius in stainless steel
(
- Contribution to journal › Article
- 2022
-
Mark
Performance and wear mechanisms of different PcBN tools when machining superalloy AD730
(
- Contribution to journal › Article
-
Mark
Machinability study on dry machining of white cast iron by polycrystalline cubic boron nitride inserts
(
- Contribution to journal › Article
-
Mark
Numerical investigations on residual stresses in orthogonal cutting of Ti-6A1-4V
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2021
-
Mark
Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
A comprehensive study on cutting mechanisms and surface integrity of AISI 304 when turning a curved surface
(
- Contribution to journal › Article
-
Mark
An analytical method for continuously predicting mechanics and residual stress in fillet surface turning
(
- Contribution to journal › Article
-
Mark
FE analysis on the association between tool edge radius and thermal-mechanical load in machining Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of the influence of tool rake angles on machining of inconel 718
(
- Contribution to journal › Article
-
Mark
Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations
(
- Contribution to journal › Article
-
Mark
On the steady-state workpiece flow mechanism and force prediction considering piled-up effect and dead metal zone formation
(
- Contribution to journal › Article
- 2020
-
Mark
New nonlinear optical crystal of rhodamine 590 acid phthalate
(
- Contribution to journal › Article
-
Mark
A hybrid model for force prediction in orthogonal cutting with chamfered tools considering size and edge effect
(
- Contribution to journal › Article
-
Mark
Machinability evaluation of low-lead brass alloys
2020) 29th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2019 In Procedia Manufacturing 38. p.1723-1730(
- Contribution to journal › Article
-
Mark
Investigation on work hardening phenomenon in turning Inconel 718 with chamfered inserts considering thermal-mechanical loads
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718
(
- Contribution to journal › Article
-
Mark
A machine learning based approach for determining the stress-strain relation of grey cast iron from nanoindentation
(
- Contribution to journal › Article
- 2019
-
Mark
Effect of machining parameters on cutting force and surface integrity when high-speed turning AD 730™ with PCBN tools
(
- Contribution to journal › Article
-
Mark
Mechanical properties of ultra-hard nanocrystalline cubic boron nitride
(
- Contribution to journal › Article
-
Mark
Advantages of architectured harmonic structure in structural performance
2019) 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D 580.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparative assessment of the surface integrity of AD730® and IN718 superalloys in high-speed turning with a CBN tool
(
- Contribution to journal › Article
- 2018
-
Mark
Assessment on abrasiveness of high chromium cast iron material on the wear performance of PCBN cutting tools in dry machining
(
- Contribution to journal › Article
-
Mark
Surface Characterization of AD730TM Part Produced in High Speed Turning with CBN tool
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Plastic Deformation and Residual Stress in High Speed Turning of AD730™ Nickel-based Superalloy with PCBN and WC Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling tool life in high speed machining of AD730
(
- Contribution to journal › Article
- 2017
-
Mark
Modeling subsurface deformation induced by machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
Quantitative study of roughness effect in nanoindentation on AISI316L based on simulation and experiment
2017) In Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science 231(21). p.4067-4075(
- Contribution to journal › Article
-
Mark
Nano-scale characterization of white layer in broached Inconel 718
(
- Contribution to journal › Article
-
Mark
Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
(
- Contribution to journal › Article
-
Mark
Investigation of the Effect of Grinding Parameters on Surface Quality in Grinding of TC4 Titanium Alloy
(
- Contribution to journal › Article
-
Mark
Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
(
- Contribution to journal › Article
-
Mark
Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools
(
- Contribution to journal › Article
-
Mark
Nano-Scratching resistance of high-chromium white cast iron and its correlation with wear of cBN tool in machining
(
- Contribution to journal › Article
-
Mark
Dynamics modeling and modal experimental study of high speed motorized spindle
(
- Contribution to journal › Article
-
Mark
Comparative study on the machinability of lead-free brass
(
- Contribution to journal › Article
- 2016
-
Mark
Ultrahard boron nitride material through a hybrid laser/waterjet based surface treatment
(
- Contribution to journal › Article
-
Mark
Simulation of microstructural evolution during repair welding of an IN718 plate
(
- Contribution to journal › Article
-
Mark
Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
2016) In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 47(7). p.3664-3676(
- Contribution to journal › Article
-
Mark
Machinability of CuZn21Si3P brass
(
- Contribution to journal › Article
-
Mark
Effect of feed on sub-surface deformation and yield strength of oxygen-free pitch copper in machining
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Wear and Vibrations Generated When Turning High-chromium White Cast Iron with pCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
Analysis of In Situ Mechanical Properties of Phases in High-Alloyed White Iron Measured by Grid Nanoindentation
(
- Contribution to journal › Article
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters under Variation of Side and Back Rake Angle
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influences of micro mechanical property and microstructure on performance of machining high chromium white cast iron with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 2: Variation of Tool Geometry along the Edge Line
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using SEM and Nanoindentation
(
- Contribution to journal › Article
-
Mark
Performance assessment of pCBN and bCBN tools in machining of high-chromium white cast iron
(
- Contribution to journal › Article
- 2014
-
Mark
Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling and experimentation on multistage work-hardening mechanism in machining with nose-radiused tools and its influence on machined subsurface quality and tool wear
(
- Contribution to journal › Article
-
Mark
Effect of thermal exposure on microstructure and nano-hardness of broached Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of the minimum chip thickness on the obtained surface roughness during turning operations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel
(
- Contribution to journal › Article
-
Mark
Numerical and experimental study of the roughness effects on mechanical properties of AISI316L by nanoindentation
2014) In Modeling and Numerical Simulation of Material Science(
- Contribution to journal › Article
-
Mark
Machinability of Lead-Free Brass – A comparative study
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability and process stability when turning Alloy 718 with standard and produced by selective laser sintering toolholders
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Life and Wear Model in Metal Cutting, Part 1 - Influence of Varying Flank Wear Criterion on Colding's Tool Life Equation
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of the Workpiece Material Properties on the Cutting Forces
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of cutting speed and tool wear on vibrations and process stability when turning Inconel 718 with PCBN tools
(
- Contribution to journal › Article
-
Mark
Residual stresses in high speed turning of nickel-based superalloy
(
- Contribution to specialist publication or newspaper › Specialist publication article
-
Mark
Tool Life and Wear Modelling in Metal Cutting, Part 2 ─ Based on Combining the Archard and the Colding Equations
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Characterizing the mechanical properties of skin-core structure in polymer molding process by nanoindentation
2014) Swedish Production Symposium, 2014(
- Contribution to conference › Paper, not in proceeding
-
Mark
Self-generated vibrations and process stability when turning high chromium white cast iron with PCBN tools
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2013
-
Mark
Modeling effect of surface roughness on nanoindentation tests
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Wear mechanisms of silicon carbide-whisker-reinforced alumina (Al2O3-SiCw) cutting tools when high-speed machining aged Alloy 718
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of whisker-reinforced alumina, coated and uncoated PCBN tools when high-speed turning aged Inconel 718
(
- Contribution to journal › Article
-
Mark
Sustainable machining through increasing the cutting tool utilization
(
- Contribution to journal › Article
-
Mark
A novel experimental research on vibration characteristics of the running high-speed motorized spindles
(
- Contribution to journal › Article
-
Mark
Dynamic Stability of the Process of Turning Nickel Superalloys Using a Toolholder Produced by Selective Laser Sintering
(
- Contribution to journal › Article
-
Mark
Effects of Cutting Speed when Turning Age Hardened Inconel 718 with PCBN Tools of Binderless and Low-CBN Grades
(
- Contribution to journal › Article
-
Mark
A step towards sustainable machining through increasing the cutting tool utilization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
ECCI and EBSD study of subsurface damages in high speed turning of inconel 718 under different tools and machining parameters
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718
2013) The 13th International Conference on Fracture (ICF13)(
- Contribution to conference › Paper, not in proceeding
-
Mark
Extreme Hardness Achievements in Binderless Cubic Boron Nitride Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool wear and tool life of conventional pcBN, binderless cBN and wBN-cBN tool materials in continuous finish hard turning of cold work tool steel
2013) 16-th International Conference Rock- and materials-processing tools: engineering, technology and application(
- Contribution to conference › Paper, not in proceeding
-
Mark
Influence of Dry Cut and Tool Wear on Residual Stresses in High Speed Machining of Nickel-Based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2012
-
Mark
A Sustainable Approach for Milling of Duplex Stainless Steel by Increasing the Cutting Tool Utilization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
(
- Contribution to journal › Article
-
Mark
Comprehensive dynamic analysis of vibration and stability when ultrahigh speed turning Inconel 718 with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
(
- Contribution to journal › Article
-
Mark
Characterization of mechanical properties of machined surface by nanoindentation — Part 1: Simulation of indenter geometry effects
2012) Swedish Production Symposium, 2012(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Identification of Subsurface Deformation in Machining of Inconel 718
2012) International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011) In Applied Mechanics and Materials 117-119. p.1681-1688(
- Contribution to journal › Article
-
Mark
Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling Subsurface Deformation in High Speed Machining of Inconel 718
2012) 1st CIRP International Conference on Virtual Machining Process Technology(
- Contribution to conference › Paper, not in proceeding
-
Mark
Simulation of indenter geometry effects in nanoindentation
2012) Nordic Seminar in Computational Mechanics, NSCM-25(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2011
-
Mark
Characterization of White Layer Generated when Turning Aged Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling tool life in the machining of strain-hardening material - Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the surface quality of Alloy 718 in finishing turning with CBN cutting tools
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Process induced subsurface deformation of Alloy 718 in relation to different cutting conditions
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Study on work-hardening phenomena in machining aged Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 1: Chip area parameters under both side and back rake angles variation
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 2: Variation of tool angles along the edge line
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
- 2010
-
Mark
Improving waviness of bore in precision hard turning by pressurized coolant
(
- Contribution to journal › Article
- 2008
-
Mark
Machinability of abrasion resistance cast iron with PCBN cutting tools
(
- Contribution to journal › Article
-
Mark
Modeling the cooling effect in compressed air assisted machining
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Tribological analysis in comparison of dry and air assisted maching
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
- 2007
-
Mark
Effects of lubricant condition and tool wear in hard turning of novel-abrasion-resistance (N-AR) cast iron
(
- Contribution to journal › Article
-
Mark
Hard milling of abrasion resistance cast iron with pcbn cutting tool
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
- 2004
-
Mark
Identification of cutting errors in precision hard turning process
(
- Contribution to journal › Article
-
Mark
Machining characteristics of novel-abrasion resistant iron
(
- Contribution to journal › Article
- 2003
-
Mark
Effect of chamfer angle on wear of PCBN cutting tool
(
- Contribution to journal › Article
-
Mark
The monitoring of flank wear on the CBN tool in the hard turning process
(
- Contribution to journal › Article
- 1998
-
Mark
Samverkan mellan Mekaniska och Termiska Belastningar Verkande på Skärverktyg
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study of Mechanical Load at Entry and Exit Phase of the Intermittent Cut
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1997
-
Mark
Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification Part I: Stress Model
(
- Contribution to journal › Article
-
Mark
Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification, Part II: Experimental Studies
1997) In International Journal of Machine Tools & Manufacture(
- Contribution to journal › Article
-
Mark
Analysis of Mechanical Load in the Cutting Tool at Entry and Exit Phase of the Intermittent Cut
1997)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1996
-
Mark
Mechanical Load Identification for Spontaneous Tool Failure Monitoring
1996)(
- Thesis › Doctoral thesis (monograph)
- 1995
-
Mark
A system for monitoring cutting tool spontaneous failure based on the cutting edge stress estimation
(
- Contribution to journal › Article
-
Mark
Identification of mechanical load in cutting tool using an artificial neural network
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1994
-
Mark
An approach for on-line cutting edge stress estimation
(
- Contribution to journal › Article
-
Mark
Cutting tool mechanical load simulation in turning operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding