1 – 87 of 87
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2022
-
Mark
A resistor network model for analysis of current and temperature distribution in carbon fibre reinforced polymers during induction heating
(
- Contribution to journal › Article
- 2021
-
Mark
Improvement of tool utilization when hard turning with cBN tools at varying process parameters
(
- Contribution to journal › Article
-
Mark
Evolution of magnetic properties during tempering
2021) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
-
Mark
Analysis of the temperature distribution in weave-based CFRP during induction heating using a simplified numerical model with a cross-ply representation
(
- Contribution to journal › Article
-
Mark
Numerical modelling of CFRP induction heating using temperature-dependent material properties
(
- Contribution to journal › Article
- 2020
-
Mark
A numerical model to analyse the temperature distribution in cross-ply CFRP during induction heating
(
- Contribution to journal › Article
- 2019
-
Mark
Optimization of Electric Powertrains Based on Scalable Cost and Performance Models
(
- Contribution to journal › Article
-
Mark
Performance Estimation of a Traction Machine with Direct Cooled Hairpin Winding
2019) 2019 IEEE Transportation Electrification Conference and Expo(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2018
-
Mark
A method for inductive measurement of equivalent electrical conductivity in thin non-consolidated multilayer carbon fibre fabrics
(
- Contribution to journal › Article
-
Mark
Assessment of cooling integration with direct cooled windings
2018) 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Towards energy efficient heating in industrial processes - Three steps to achieve maximized efficiency in an induction heating system
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Power Losses and Heat Extraction in a Stator with Directly Air-Cooled Laminated Windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2017
-
Mark
Scalable performance, efficiency and thermal models for electric drive components used in powertrain simulation and optimization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electric roads : Reducing the societal cost of automotive electrification
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
From Chip to Converter : A Complete Cost Model for Power Electronics Converters
(
- Contribution to journal › Article
-
Mark
Induction heating of carbon fiber composites: Investigation of electrical and thermal properties
(
- Contribution to journal › Article
-
Mark
Performance and manufacturability tradeoffs of different electrical machine designs
2017) 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Mapping of magnetic properties for simulations of high-Temperature electromagnetic applications
2017) In COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 36(2). p.546-554(
- Contribution to journal › Article
- 2016
-
Mark
Cooling of Litz Wires in Industrial Induction Heating Applications
2016) 7th International Swedish Production Symposium(
- Contribution to conference › Paper, not in proceeding
- 2015
-
Mark
Electrical Machine Design with Directly Cooled Laminated Fractional Pitch Windings
2015) 5th International Electric Drives Production Conference (E|DPC)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2014
-
Mark
Induction heating using a 2-phase travelling wave setup
(
- Contribution to journal › Article
-
Mark
Design and development of a roller with embedded heating for uniform temperature generation
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Statistical interfaces for production of a permanent magnet based rotor
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Production Cost Case Generation by a Recursive Monte-Carlo Method in Electrical Machine Production
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Induction heating of carbon fiber structures - properties and challenges
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2013
-
Mark
The influence of tool steel microstructure on friction in sheet metal forming
(
- Contribution to journal › Article
-
Mark
General Conception of Polar Diagrams for the Evaluation of the Potential Machinability of Workpiece Materials
(
- Contribution to journal › Article
-
Mark
A modular framework for evaluation of electrical machine production costs
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2012
-
Mark
Soft magnetic moldable composites: Properties and applications
(
- Contribution to journal › Article
-
Mark
Cost drivers and production limitations for electrified vehicle traction components
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and evaluation of moulded powder-core machine for in-wheel drive application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Alternative production process for electric machine windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The scale of permanent magnet materials for automotive traction motors
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
New manufacturing methods for electric motors using different soft magnetic material combinations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis of Current Paths in Induction Heating of flat sheets using single sided Longitudinal Field Inductors
2012) 15th International Conference on Electromagnetic Field Computation(
- Contribution to conference › Paper, not in proceeding
-
Mark
A method for fast characterization of power efficiency in induction heating processes
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Improved Tribotesting for Sheet Metal Forming
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2011
-
Mark
Improved tool wear properties in sheet metal forming using Carbide steel, a novel abrasion resistant cast material
(
- Contribution to journal › Article
-
Mark
Experimental studies of cutting force variation in face milling
(
- Contribution to journal › Article
-
Mark
Evaluating the Machinability of Inconel 718 Using Polar Diagrams
(
- Contribution to journal › Article
-
Mark
A new concept of coil design for industrial induction heating
2011) Swedish Production Symposium 2011(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electrical isolation of coils in Soft Magnetic Composite applications
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Industrial heating using energy efficient induction technology
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Development of a Novel Superfinishing Apparatus for Controlled Texturing of Functional Surfaces
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
The influence of tool temperature on tribological conditions in sheet metal forming
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
- 2010
-
Mark
Evaluating the machinability of Inconel 718 using polar diagrams
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An integrated design of SM2C core motor for vehicular applications
2010) XIX International Conference on Electrical Machines (ICEM), 2010(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Towards manufacturing of perfect magnets
2010) FAIM2010, Flexible Automation and Intelligent Manufacturing(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Prototype based study of different winding configurations with SM2C core
2010) XIX International Conference on Electrical Machines (ICEM), 2010(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2009
-
Mark
An integrated design of a machine with soft magnetic mouldable composite
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and prototyping a torus machine with a rotocast core
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evaluation of soft magnetic mouldable composite core motors
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
New advances in soft magnetic materials - properties of moulded flux conductors in inductors and electrical motors
2009) Inductica Technical Conference(
- Contribution to conference › Paper, not in proceeding
- 2008
-
Mark
Machinability of abrasion resistance cast iron with PCBN cutting tools
(
- Contribution to journal › Article
-
Mark
Modelling of metal cutting tool wear based on Archard’s wear equation
2008)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Gjutuppgiften – Erfarenheter av problembaserat lärande i en tillämpad teknikkurs för ett stort elevantal
2008) LTHs 5:e Pedagogiska Inspirationskonferens, 2008(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Greenheat - energy efficient technology for industrial heating applications
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Tribological analysis of the machinability of compacted graphite iron
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling ot metal cutting tool wear based on Archards wear equation
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Greencut - an attempt to introduce an environmentally sustainable system for complex cutting tools
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Rotocast - a new methos to produce optimally packed SMC components
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Experimental studies of cutting force variation in face milling
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
- 2007
-
Mark
Effects of lubricant condition and tool wear in hard turning of novel-abrasion-resistance (N-AR) cast iron
(
- Contribution to journal › Article
-
Mark
True equivalent chip thickness for tools with a nose radius
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Hard milling of abrasion resistance cast iron with pcbn cutting tool
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Coldings tool life model applied on tool wear when machining the Maxthal material
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Injection moulding of magnetic flux conductors based on soft magnetic composites
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Polar machinability diagrams - a model to predict the machinability of a work material
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling of the composite temperature 8c in metal cutting tools
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Analytic modelling of contact stresses around the honed edge in metal cutting - based on cutting force measurements
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
- 2004
-
Mark
Identification of cutting errors in precision hard turning process
(
- Contribution to journal › Article
-
Mark
Machining characteristics of novel-abrasion resistant iron
(
- Contribution to journal › Article
- 2003
-
Mark
Effect of chamfer angle on wear of PCBN cutting tool
(
- Contribution to journal › Article
-
Mark
Asymmetrical Flow Field-Flow Fractionation and Multiangle Light Scattering for Molar Mass Analysis of Polysaccharide Derivatives
2003)(
- Thesis › Doctoral thesis (compilation)
- 2000
-
Mark
Bandsawing. Part I: cutting force model including effects of positional errors, tool dynamics and wear
(
- Contribution to journal › Article
- 1998
-
Mark
Samverkan mellan Mekaniska och Termiska Belastningar Verkande på Skärverktyg
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Adaptiv reglering av verktygvibrationer vid svarvning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study of Mechanical Load at Entry and Exit Phase of the Intermittent Cut
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1997
-
Mark
Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification Part I: Stress Model
(
- Contribution to journal › Article
-
Mark
Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification, Part II: Experimental Studies
1997) In International Journal of Machine Tools & Manufacture(
- Contribution to journal › Article
-
Mark
Analysis of Mechanical Load in the Cutting Tool at Entry and Exit Phase of the Intermittent Cut
1997)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 1995
-
Mark
A system for monitoring cutting tool spontaneous failure based on the cutting edge stress estimation
(
- Contribution to journal › Article
- 1994
-
Mark
Cutting tool mechanical load simulation in turning operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simulated design and manufacturing of a circular press joint
(
- Contribution to journal › Article
- 1993
-
Mark
Ytor, dynamik och mikrogeometrier: skärande bearbetning
1993)(
- Thesis › Doctoral thesis (monograph)
- 1988
-
Mark
Plastic deformation and machining properties of some low volume fraction short-fiber reinforced matrix composite materials
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding