201 – 300 of 1035
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2014
-
Mark
Extremal states of energy of a double-layered thick-walled tube – application to residually stressed arteries
(
- Contribution to journal › Article
-
Mark
Precipitate evolution in the early stages of ageing in Inconel 718 investigated using small-angle x-ray scattering
(
- Contribution to journal › Article
-
Mark
Microstructure evolution in polycrystals modeled by level sets
2014) 14th European Mechanics of Materials Conference - EMMC14(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Hybrid Approach to the Modelling and Simulation of Grinding Processes
2014) 11th World Congress on Computational Mechanics (WCCM) / 5th European Conference on Computational Mechanics (ECCM) / 6th European Conference on Computational Fluid Dynamics (ECFD) p.1932-1937(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
To what extent can linear finite element Models of Human femora predict failure under stance and fall loading configurations?
2014) In Journal of Biomechanics(
- Contribution to journal › Article
-
Mark
Energy from CO2 using capacitive electrodes - Theoretical outline and calculation of open circuit voltage
(
- Contribution to journal › Article
-
Mark
A new paradigm for the in vitro simulation of sideways fall loading of the proximal femur
(
- Contribution to journal › Article
-
Mark
Isogeometric elements in the dynamic relaxation method
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comprehensive evaluation of PCA-based finite element modelling of the human femur
2014) In Medical Engineering & Physics(
- Contribution to journal › Article
-
Mark
Analysis of a viscous soft dielectric elastomer generator operating in an electrical circuit
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Gear Tooth Surface Roughness of Helical Gears Manufactured by a Form Milling Cutter
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
GPU-accelerated polycrystal plasticity simulations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Level set modeling of microstructure evolution
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Linearized equations of motion in multibody dynamics
(
- Contribution to journal › Article
-
Mark
Interactive computational modelling in early-stage architectural design
2014) 2nd Symposium on Structures in Architecture 2014(
- Contribution to conference › Abstract
-
Mark
Finite strain topology optimization based on phase-field regularization
(
- Contribution to journal › Article
-
Mark
Modelling development of coupled temperature and moisture profiles in paperboard rolls during transport and storage
2014) 6th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media, 2014(
- Contribution to conference › Abstract
-
Mark
Joint study on material properties of adhesives to be used in load-bearing timber-glass composite elements
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Using GPU accelerators for crystal plasticity simulations
2014) 11th World Congress on Computational Mechanics(
- Contribution to conference › Abstract
-
Mark
Mesoscale modeling of microstructure evolution using level sets
2014) 3rd International Workshop on Physics-based Models and Experimental Verification In JRC Science and Policy Reports Book of abstracts. p.38-38(
- Contribution to journal › Published meeting abstract
-
Mark
Experimental investigation on timber-glass composite I-beams
2014) Challenging Glass 4 & COST Action TU0905 Final Conference(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analytical prediction of package collapse loads – Consideration to windows in the packages.
(
- Contribution to journal › Article
-
Mark
Structural optimization of mini-plates in fixation of human mandible fractures
2014) Nordic Seminar on Computational Mechanics, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Phase-field modelling of intermetallic compounds in the Cu-Sn system with application to tin whisker growth
2014) 14th European Mechanics of Materials Conference, EMMC14(
- Contribution to conference › Abstract
-
Mark
X-ray scattering with simultaneous in-situ loading and DIC
2014) 14th European Mechanics of Materials Conference, EMMC14(
- Contribution to conference › Abstract
-
Mark
Efficient crystal plasticity simulations of microstructure evolution
2014)(
- Thesis › Licentiate thesis
-
Mark
Simulation of local pressure build-ups appearing during rapidly heating in compressed paperboard
2014) European Mechanics of Materials Conference 2014 (EMMC14)(
- Contribution to conference › Abstract
-
Mark
Form Finding for Ground Vibration Reduction in an Urban Scale
2014) IASS-SLTE Symposium 2014: Shells, Membranes and Spatial Structures: Footprints(
- Contribution to conference › Paper, not in proceeding
-
Mark
A non-affine micro-sphere formulation for electroactive polymers
2014) 85th Annual meeting of the International Association of Applied Mathematics and Mechanics 2014(
- Contribution to conference › Paper, not in proceeding
-
Mark
Load-bearing timber-glass shear walls
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Rapid heating of moist paperboard exposed to extensive compression
2014) 6th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media(
- Contribution to conference › Abstract
-
Mark
Polymer deformation measurements on multiple scales: X-ray scattering & DIC
2014) 16th International conference of experimental mechanics(
- Contribution to conference › Abstract
-
Mark
Implicit yield function formulation for granular and rock-like materials
(
- Contribution to journal › Article
-
Mark
Interface models at finite displacements vis-a-vis fundamental physical laws
(
- Contribution to journal › Published meeting abstract
-
Mark
Long term in-situ measurements of displacement, temperature and relative humidity in a multistorey residential clt-building
2014) WCTE 2014, World Conference on Timber Engineering(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design approaches for timber-glass beams
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Förfarande och anordning för utvärdering av en bräda av trä
2014)(
- Patent › Patent
-
Mark
Modelling of viscous dielectric elastomers using a non-affine micro-sphere formulation
2014) 14th European Mechanics of Materials Conference (EMMC14)(
- Contribution to conference › Abstract
-
Mark
Continuum-based elasto-plastic constitutive model for paperboard at finite strains using distortional hardening
2014) Progress in Paper Physics(
- Contribution to conference › Paper, not in proceeding
-
Mark
Harvesting energy from CO2 emissions
(
- Contribution to journal › Article
-
Mark
Identification of weak sections in gulam beams using calculated stiffness profiles based on lamination surface scanning
2014) WCTE 2014, World Conference on Timber Engineering(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Coupling elements for substructure modelling of lightweight multi-storey buildings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob
2014)(
- Other contribution › Miscellaneous
-
Mark
Integration of multi-objective structural optimization into ANSYS software with application to artificially hip replacement joints
2014) ANSYS 2014 Convergence Conferences(
- Contribution to conference › Abstract
-
Mark
A non-affine micro-sphere formulation for viscous electroactive polymers
2014) 85th Annual meeting of the international Association of Applied Mathematics and Mechanics(
- Contribution to conference › Abstract
-
Mark
Does surface roughness influence the primary stability of acetabular cups? A numerical and experimental biomechanical evaluation.
(
- Contribution to journal › Article
-
Mark
Abrasive flow machining applied to plastic gear matrix polishing
(
- Contribution to journal › Article
- 2013
-
Mark
Two-dimensional elastic contact model for rubber covered rollers
(
- Contribution to journal › Article
-
Mark
Characterization of fluid flow in a shear band in porous rock using neutron radiography
(
- Contribution to journal › Article
-
Mark
Microstructure evolution influenced by dislocation density gradients modeled in a reaction-diffusion system
(
- Contribution to journal › Article
-
Mark
Experimental micro-mechanics of granular media studied by x-ray tomography: Recent results and challenges
(
- Contribution to journal › Article
-
Mark
Structural dynamics teaching example: A linear test analysis case using open software
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evaluation of Parameters of Bond Action between FRP and Concrete
(
- Contribution to journal › Article
-
Mark
Reduction in ground vibrations by the use of wave obstacles
2013) In TVSM-3000(
- Thesis › Licentiate thesis
-
Mark
The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analytical modelling of hysteresis heating in rolling contact of rubber covered rollers
(
- Contribution to journal › Article
-
Mark
A three dimensional plasticity model for perpendicular to grain cohesive fracture in wood
(
- Contribution to journal › Article
-
Mark
Production and properties of adhesives formulated from laccase modified Kraft lignin
(
- Contribution to journal › Article
-
Mark
Modelling procedures and properties of rubber in rolling contact
(
- Contribution to journal › Article
-
Mark
Comparison of design rules for glued-in rods and design rule proposal for implementation in European standards
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermodynamically based fictitious crack/interface model for general normal and shear loading
(
- Contribution to journal › Article
-
Mark
Direct deposition of gas phase generated aerosol gold nanoparticles into biological fluids - corona formation and particle size shifts.
(
- Contribution to journal › Article
-
Mark
Enhanced design approach for reinforced notched beams
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Finite element modelling of moisture related and visco-elastic deformations in inhomogeneous timber beams
(
- Contribution to journal › Article
-
Mark
A modified level set approach to 2D modeling of dynamic recrystallization
(
- Contribution to journal › Article
-
Mark
Influence of hydrogen content on fracture toughness of CWSR Zr-2.5Nb pressure tube alloy
(
- Contribution to journal › Article
-
Mark
Fracture characterisation of green glued-polyurethane adhesive bonds in Mode I
(
- Contribution to journal › Article
-
Mark
Prediction of timber bending strength and in-member cross-sectional stiffness vartiation on basis of local wood fibre orientation
(
- Contribution to journal › Article
-
Mark
Howard's algorithm in a phase-field topology optimization approach
(
- Contribution to journal › Article
-
Mark
Localized deformation in intensely fissured clays studied by 2D digital image correlation
(
- Contribution to journal › Article
-
Mark
Modelling, simulation and experimental investigation of chip formation in internal traverse grinding
(
- Contribution to journal › Article
-
Mark
Interface fracture toughness of a multi-directional woven composite
(
- Contribution to journal › Article
-
Mark
Inverse-motion-based form finding for quasi-incompressible finite electroelasticity
(
- Contribution to journal › Article
-
Mark
Experimental Validation Of Finite Element Model For Proximal Composite Femur Using Optical Measurements
(
- Contribution to journal › Article
-
Mark
Perpendicular to grain stiffness of timber cross sections as affected by growth ring pattern, size and shape
(
- Contribution to journal › Article
-
Mark
Influence of stress field of expanding and contracting plate shaped precipitate on hydride embrittlement of Zr-alloys
(
- Contribution to journal › Article
-
Mark
Numerical integration of elasto-plasticity coupled to damage using a diagonal implicit Runge-Kutta integration scheme
(
- Contribution to journal › Article
-
Mark
Influence of process parameters on grain refinement in AA1050 aluminum during cold rolling
(
- Contribution to journal › Article
-
Mark
Modeling of a thermomechanical process chain for sheet steels.
(
- Contribution to journal › Article
-
Mark
Strain fields and mechanical response of a high to medium fissured bentonite clay
(
- Contribution to journal › Article
-
Mark
A Perturbation Analysis of Non-Linear Diffusion from a Permeable Solid into a Finite Volume Containing a Liquid
2013) In LUTFD2/(TFHF-3088)/1-8/(2013)(
- Book/Report › Report
-
Mark
Diffusion in Bone Tissue
2013)(
- Thesis › Licentiate thesis
-
Mark
Simulation-based analysis of the differences in the removal rate of chlorides, nitrates and sulfates by electrokinetic desalination treatments
(
- Contribution to journal › Article
-
Mark
Computing multi-species chemical equilibrium with an algorithm based on the reaction extents
(
- Contribution to journal › Article
-
Mark
Modeling of recrystallization
(
- Contribution to journal › Published meeting abstract
-
Mark
Load bearing timber glass composites : A WoodWisdom-Netproject for innovative building system
2013) COST Action TU0905 Mid-term Conference on Structural Glass, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Micro-structurally based kinematic approaches to electromechanics of the heart
2013) p.175-187(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Using GPU accelerators for polycrystalline material simulations
(
- Contribution to conference › Abstract
-
Mark
Characterising sand deformation at the grain scale in three dimensions
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Manufacturing Renaissance: Return of manufacturing to western countries
2013) 2nd International Conference on Sustainable Intelligent Manufacturing(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling of the coupling between the temperature, moisture and deformation of paperboard
2013) 5th International Conference on Porous Media & Annual Meeting of the International Society for Porous Media(
- Contribution to conference › Abstract
-
Mark
A constitutive in-plane elasto-plastic model for paperboard taking into account the effects of pre-straining
2013) NAFEMS NORDIC Seminar: Improving Simulation Prediction by Using Advanced Material Models(
- Contribution to conference › Paper, not in proceeding
-
Mark
Application of X-ray Tomography to the Characterisation of Grain-Scale Mechanisms in Sand
(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Modeling acoustic properties of different types of lightweight T-junctions
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Isotropic/Kinematic Hardening in Thermoplasticity
2013) p.1-12(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Modeling shape memory alloy single crystalline responses using an anisotropic yield surface
2013)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Hyperelastic constants from a modified hardness test using energy balance obtained from FE-analysis
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental evidence of granulence
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Handbok för beställare och projektörer av flervåningshus i trä
2013) In SP Rapport(
- Book/Report › Book
-
Mark
Mesoscale modeling of microstructure evolution influenced by dislocation density gradients
2013) 5th International Conference on Recrystallization & Grain Growth(
- Contribution to conference › Paper, not in proceeding