1 – 50 of 81
- show: 50
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2023
-
Mark
Statistical Assessment of Core Loss Measurement Techniques for Laminated Steel
2023) 2023 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) In IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) 2023.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Parameter Identification For Inter Turn Fault Detection In Permanent-Magnet Synchronous Motors Using Stator Flux Linkage DC Offset Monitoring
2023) 14th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2023 p.498-504(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2022
-
Mark
MULTIDISCIPLINARY ASSESSMENT OF A YEAR 2035 TURBOFAN PROPULSION SYSTEM
2022) 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 In 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 7. p.4981-4990(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis and Development of Integrated Low-Pressure Shaft Generator
2022) 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 In 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022 8. p.5956-5972(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2019
-
Mark
Optimization of Electric Powertrains Based on Scalable Cost and Performance Models
(
- Contribution to journal › Article
-
Mark
Specification of a Specimen for Accelerated Thermal Aging Tests
2019) 12th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, SDEMPED 2019 p.49-55(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance Estimation of a Traction Machine with Direct Cooled Hairpin Winding
2019) 2019 IEEE Transportation Electrification Conference and Expo(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Aerospace electric generator design considerations
2019) 9th International Electric Drives Production Conference, EDPC 2019 In 2019 9th International Electric Drives Production Conference, EDPC 2019 - Proceedings(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Aerospace Electric Generator Specification and Selection - Opportunities and Challenges
2019) p.81-92(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
PM to RSM Rotor Replacement Study on Traction Machines
2019) p.41-55(
- Chapter in Book/Report/Conference proceeding › Book chapter
- 2018
-
Mark
Power Losses and Heat Extraction in a Stator with Directly Air-Cooled Laminated Windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Direct Conductor Cooling in Concentrated Windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Assessment of cooling integration with direct cooled windings
2018) 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2018(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electric roads : Analyzing the societal cost of electrifying all Danish road transport
(
- Contribution to journal › Article
- 2017
-
Mark
Societal cost of electrifying all danish road transport
2017) 30th International Electric Vehicle Symposium and Exhibition, EVS 2017(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance and manufacturability tradeoffs of different electrical machine designs
2017) 2017 IEEE International Electric Machines and Drives Conference, IEMDC 2017(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Stacked multi-level long pulse modulator topology for ESS
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Scalable performance, efficiency and thermal models for electric drive components used in powertrain simulation and optimization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
From Chip to Converter : A Complete Cost Model for Power Electronics Converters
(
- Contribution to journal › Article
- 2016
-
Mark
Development of a long pulse high power klystron modulator for the ESS linac based on the Stack Multi-Level topology
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Degradation and Fatigue of Epoxy Impregnated Traction Motors Due to Thermal and Thermal Induced Mechanical Stress : Part I: Thermal Mechanical Simulation of Single Wire due to Evenly Distributed Temperature
2016) 8th International Conference on Power Electronics, Machines and Drives PEMD 2016(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dielectric Properties Modeling and Measurement of Single Tooth Coil Insulation System under Accelerated Degradation Test
(
- Chapter in Book/Report/Conference proceeding › Preface to conference proceeding
-
Mark
Loss mapping of an Insert Permanent Magnets Synchronous Machine for parallel hybrid electric heavy vehicles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Direct electromagnetic actuation on high ratio gears
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Degradation and fatigue of epoxy impregnated traction motors due to thermal and thermal induced mechanical stress - Part I : Thermal mechanical simulation of single wire due to evenly distributed temperature
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Degradation and fatigue of epoxy impregnated traction motors due to thermal and thermal induced mechanical stress - Part II : Thermal mechanical simulation of multiple wires due to evenly and unevenly distributed temperature
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Engineering considerations on skewing of an interior permanent magnet synchronous machine for parallel hybrid electric heavy vehicles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
Predictive monitoring of turn-on-turn insulation in single tooth coils
2015) International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Electrical Machine Design with Directly Cooled Laminated Fractional Pitch Windings
2015) 5th International Electric Drives Production Conference (E|DPC)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Unconventional Magnetic Actuators for Automatic Transmission Shifted by Wire
2015)(
- Book/Report › Report
- 2014
-
Mark
Design and development of a roller with embedded heating for uniform temperature generation
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cost estimation of electric traction machine and gearbox for a hybrid vehicle application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance Estimation of Hybrid Excited Machine with Alternating Pole Configuration
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Thermal Modeling and Application of Electrical Machine in Hybrid Drives
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal properties on high fill factor electrical windings: Infiltrated vs non infiltarted
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Consistency analysis of torque measurements performed on a PMSM using dynamic testing
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat transfer analysis of a traction machine with directly cooled laminated windings
2014) 2014 4th International Electric Drives Production Conference, EDPC 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2013
-
Mark
Low speed brushless PMSM for in-wheel application - Damia-2 application status report 2013
2013)(
- Book/Report › Report
-
Mark
Medium power electric generators for wind power application - Damia-2 application status report 2013
2013)(
- Book/Report › Report
-
Mark
High speed brushless PMSM for in-fan application - Damia-2 application status report 2013
2013)(
- Book/Report › Report
- 2012
-
Mark
Sub-Optimization of a claw-pole structure according to material properties of soft magnetic materials
(
- Contribution to journal › Article
-
Mark
Impact of soft magnetic material on construction of radial flux electrical machines
(
- Contribution to journal › Article
-
Mark
Electrical machines with laminated winding for hybrid vehicle application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Alternative production process for electric machine windings
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and evaluation of moulded powder-core machine for in-wheel drive application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and evaluation of electrical machine for parallel hybrid drive for heavy vehicles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
New manufacturing methods for electric motors using different soft magnetic material combinations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Design and experimental evaluation of a compact hybrid excitation claw-pole rotor
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modular three-phase machines with laminated winding for hybrid vehicle application
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Laminated winding with rapid cooling capability for electrical machines
2012) International Conference for Inductive and Electromagnetic Components, Systems and Devices including Manufacturing and Processing (INDUCTICA 2012)(
- Contribution to conference › Paper, not in proceeding