1501 – 1750 of 2136
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2013
-
Mark
On continuum models for heat transfer in micro/nano-scale porous structures relevant for fuel cells
(
- Contribution to journal › Scientific review
-
Mark
SOFC modeling considering hydrogen and carbon monoxide as electrochemical reactants
(
- Contribution to journal › Article
-
Mark
Conceptual Mean-Line Design of Single and Twin-Shaft Oxy-Fuel Gas Turbine in a Semiclosed Oxy-Fuel Combustion Combined Cycle
(
- Contribution to journal › Article
- 2012
-
Mark
Numerical Predictions of Pressure Drop and Heat Transfer in a Blade Internal Cooling Passage with Continuous/Truncated Ribs
(
- Contribution to journal › Article
-
Mark
Thermodynamic studies of a HAT cycle and its components
(
- Contribution to journal › Article
-
Mark
Computational analysis of the influences of guide ribs/vanes on enhanced heat transfer of a turbine blade tip-wall
(
- Contribution to journal › Article
-
Mark
Waste Heat Recovery from Multiple Heat Sources in a HD Truck Diesel Engine Using a Rankine Cycle - A Theoretical Evaluation
2012) SAE 2012 International Powertrains, Fuels & Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Comparative Analysis of WHR System in HD Engines Using Conventional Diesel Combustion and Partially-Premixed Combustion
2012) SAE Commercial Vehicle Engineering Congress(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of Different Rim Widths and Blowing Ratios on Film Cooling Characteristics for a Blade Tip
(
- Contribution to journal › Article
-
Mark
Convective Condensation of R410A in Micro-Fin Tubes
(
- Contribution to journal › Article
-
Mark
Foam Heat Exchangers: A Technology Assessment
(
- Contribution to journal › Article
-
Mark
SOFC Modeling Considering Electrochemical Reactions at the Active Three Phase Boundaries
(
- Contribution to journal › Article
-
Mark
Preface: International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control
(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Transport phenomena in solid oxide fuel cell electrodes focusing on heat transfer related to chemical reactions
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Study of Endwall Heat Transfer in a Linear Cascade
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Postcombustion CO2 Capture for Combined Cycles Utilizing Hot-Water Absorbent Regeneration
(
- Contribution to journal › Article
-
Mark
Endwall convective heat transfer for bluff bodies
(
- Contribution to journal › Article
-
Mark
Analysis of Flow and Thermal Performance of a Water-Cooled Transversal Wavy Microchannel Heat Sink for Chip Cooling
(
- Contribution to journal › Article
-
Mark
Experimental investigation of condensation in micro-fin tubes of different geometries
(
- Contribution to journal › Article
-
Mark
Heat Transfer Research in Sweden: Historical and Current Activities
(
- Contribution to journal › Article
-
Mark
Process Based Large Scale Molecular Dynamic Simulation of a Fuel Cell Catalyst Layer
(
- Contribution to journal › Article
-
Mark
Modeling natural convection heat transfer from perforated plates
(
- Contribution to journal › Article
-
Mark
Fabrication Process Simulation of a PEM Fuel Cell Catalyst Layer and Its Microscopic Structure Characteristics
(
- Contribution to journal › Article
-
Mark
Post-Combustion CO2 Capture for Combined Cycles Utilizing Hot-Water Absorbent Regeneration
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Heat Transfer in Liquid Film over the Surface of a Rotating Disk Subjected to Impinging Jet
2012)(
- Book/Report › Report
-
Mark
Efficient operation of a gas turbine on methanol using chemical recuperation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Investigations of an Industrial Lean Premixed Gas Turbine Combustor With High Swirling Flow
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An Experimental and Numerical Study of Heat Transfer and Pressure Drop on the Bend Surface of a U-duct
2012)(
- Thesis › Doctoral thesis (monograph)
-
Mark
Solid Oxide Fuel Cell Auxiliary Power Units for Heavy Duty Trucks
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
EFFECTS OF SHALLOW-ANGLE JET IMPINGEMENT AND FREE STREAM VELOCITY ON HEAT TRANSFER
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On Modeling Development of Microscopic Spatial Structure for the Catalyst Layer in a Proton Exchange Membrane Fuel Cell
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Assessing Learning in Higher Education
2012) In Project and Conference Reports(
- Book/Report › Report
-
Mark
Heat Transfer in a Channel under Effects of a Shallow-Angle Jet Impingement and a Rib
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Applicability of Ionization Current Sensing Technique with Plasma Jet Ignition Using PreChamber Spark Plug in a Heavy Duty Natural Gas Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance Analysis of a Countercurrent Flow Heat Exchanger Placed on the Truck Compartment Roof
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A CFD Investigation of Heat Transfer in a Diesel Fueled PPC Engine Applying Design of Experiments
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects Of Ribs On Internal Blade-Tip Cooling
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Personal & Researchers Information Management
2012)(
- Book/Report › Report
-
Mark
Aerodynamic Analysis of a Humid Air Turbine Expander
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Solar Thermal Technology
2012)(
- Book/Report › Report
-
Mark
Conceptual Design of a Mid-Sized Semi-Closed Oxy-Fuel Combustion Combined Cycle
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
SOFC Modeling at the Cell Scale including Hydorgen and Carbon Monoxide as Electrochemically Active Fuels
2012) ASME 2012 Tenth International Fuel Cell Science, Engineering, and Technology Conference FuelCell2012 p.281-291(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Review of Cooling Systems in Electric/Hybrid Vehicles
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Study of Convection Heat Transfer in the Entrance Region of a Rectangular Duct with Transverse Ribs
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
SOFC modeling at the cell scale including hydrogen and carbon monoxide as electrochemically active fuels
2012) ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2012 Collocated with the ASME 2012 6th International Conference on Energy Sustainability p.281-291(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance Analysis of a Countercurrent Flow Heat Exchanger Placed on the Truck Compartment Roof
(
- Contribution to journal › Article
-
Mark
The effect of heat transfer on the polarizations within an intermediate temperature solid oxide fuel cell
2012) Heat Transfer 2012(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal modelling and evaluation of borehole heat transfer.
2012)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Evaluation of Lattice Boltzmann Method for Reaction-Diffusion Process in a Porous SOFC Anode Microstructure
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparison Of Continuous And Truncated Ribs On Internal Blade Tip Cooling
2012) ASME Turbo Expo 2012(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis of Multiphase Transport Phenomena in PEMFCS by Incorporating Microscopic Model for Catalyst Layer Structures
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Review of microstructure modeling in solid oxide fuel cell electrodes
2012) Fourth International Conference on Applied Energy, ICAE 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
Numerical Investigation of Convective Heat Transfer and Pressure Drop for Ribbed Surfaces in the Bend Part of a U-Duct
2012) ASME 2012 International Mechanical Engineering Congress & Exposition IMECE 2012 7. p.1909-1916(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental investigation of methane lean blowout limit; effects of dilution, mass flow rate and inlet temperature
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Air-Entrainment in Wall-Jets Using SLIPI in a Heavy-Duty Diesel Engine
2012) SAE 2012 International Powertrains, Fuels & Lubricants Meeting In SAE International Journal of Engines 5(4). p.1684-1692(
- Contribution to journal › Article
-
Mark
Quantitative in-cylinder fuel measurements in a heavy duty diesel engine using structured laser illumination planar imaging (SLIPI)
2012) 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2012 p.500-505(
- Contribution to conference › Paper, not in proceeding
-
Mark
Introduction to Heat Transfer
2012)(
- Book/Report › Book
-
Mark
VOF MODELING AND ANALYSIS OF FILMWISE CONDENSATION BETWEEN VERTICAL PARALLEL PLATES
(
- Contribution to journal › Article
-
Mark
Logarithmic Mean Pressure Difference-A New Concept in the Analysis of the Flow Distribution in Parallel Channels of Plate Heat Exchangers
(
- Contribution to journal › Article
-
Mark
Investigation of thermal radiation effects on solid oxide fuel cell performance by a comprehensive model
(
- Contribution to journal › Article
- 2011
-
Mark
Generalized adiabatic pressure drop correlations in evaporative micro/mini-channels
(
- Contribution to journal › Article
-
Mark
Heat Transfer Characteristics of an Impinging Jet in Crossflow
(
- Contribution to journal › Article
-
Mark
Solid Oxide Fuel Cell Modeling at the Cell Scale - Focusing on Species, Heat, Charge and Momentum Transport as well as the Reaction Kinetics and Effects
2011)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Gas turbine sensor validation through classification with artificial neural networks
(
- Contribution to journal › Article
-
Mark
Parametric study on heat transfer enhancement and pressure drop of an internal blade tip-wall with pin-fin arrays
(
- Contribution to journal › Article
-
Mark
Theoretical and experimental analysis of ceiling-jet flow in corridor fires
(
- Contribution to journal › Article
-
Mark
Review on the Properties of Nano-/Microstructures in the Catalyst Layer of PEMFC
(
- Contribution to journal › Article
-
Mark
Correlations for saturated critical heat flux in microchannels
(
- Contribution to journal › Article
-
Mark
Augmented Heat Transfer of an Internal Blade Tip by Full or Partial Arrays of Pin-Fins
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Novel High-Performing Single-Pressure Combined Cycle With CO2 Capture
(
- Contribution to journal › Article
-
Mark
Convective heat transfer and fluid flow physics in some ribbed ducts using liquid crystal thermography and PIV measuring techniques
(
- Contribution to journal › Article
-
Mark
Dynamic Temperature Simulation in District Heating Systems in Denmark Regarding Pronounced Transient Behaviour
(
- Contribution to journal › Article
-
Mark
Simulation of alternative fuels for potential utilization in solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Conditions of energy efficient behaviour-a comparative study between Sweden and the UK
(
- Contribution to journal › Article
-
Mark
Analysis of multi-phase transport phenomena with catalyst reactions in polymer electrolyte membrane fuel cells - A review
(
- Contribution to journal › Scientific review
-
Mark
Effect of bi-layer interconnector design on mass transfer performance in porous anode of solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Conjugated Analysis of Heat Transfer Enhancement of an Internal Blade Tip-wall with Pin Fin arrays
(
- Contribution to journal › Article
-
Mark
Predictions of Enhanced Heat Transfer of an Internal Blade Tip-Wall With Hemispherical Dimples or Protrusions
(
- Contribution to journal › Article
-
Mark
Comparisons of Heat Transfer Enhancement of an Internal Blade Tip with Metal or Insulating Pins
(
- Contribution to journal › Article
-
Mark
Control of jet impingement heat transfer in crossflow by using a rib
(
- Contribution to journal › Article
-
Mark
CFD Investigation of Swirl-stabilized Flexi-fuel Burner Using Methane-air Mixture for Gas Turbines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Investigations of Lean Stability Limits of a Prototype Syngas Burner for Low Calorific Value Gases
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Multiphysics modelling of PEM fuel cells - with reacting transport phenomena at micro and macroscales
2011)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Modern Thermal Power Plants - Aspects on Modelling and Evaluation
2011)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Modeling Validation and Simulation of an Anode Supported SOFC including Mass and Heat Transport, Fluid Flow and Chemical Reactions
2011) ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011 p.317-327(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
CFD Modeling: Different Kinetic Approaches for Internal Reforming Reactions in an Anode-Supported SOFC
(
- Contribution to journal › Article
-
Mark
On CFD-Analysis of Heat Transfer of a Heavy-Duty Diesel Engine
2011)(
- Thesis › Licentiate thesis
-
Mark
Buildings and district heating - contributions to development and assessments of efficient technology
2011)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Comparative Analysis of Different Renewable Fuels for Potential Utilization in SOFCs
(
- Contribution to journal › Article
-
Mark
Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC
(
- Contribution to journal › Article
-
Mark
CFD Investigation of Heat Transfer in a Diesel Engine with Diesel and PPC Combustion Modes
2011) JSAE/SAE International Powertrains, Fuels & Lubricants(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Populärvetenskaplig beskrivning på svenska av avhandling
2011)(
- Working paper/Preprint › Working paper
-
Mark
Analysis of Microscopic Anode Structure Effects on an Anode-Supported SOFC Including Knudsen Diffusion
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The Kinetics Effect In SOFCs On Heat And Mass Transfer Limitations: Interparticle, Interphase And Intraparticle Transport
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
SOFC Modeling from Micro- to Macroscale: Transport Processes and Chemical Reactions
2011)(
- Thesis › Licentiate thesis
-
Mark
On Sustainability in Local Energy Planning
2011)(
- Thesis › Doctoral thesis (monograph)
-
Mark
Review of Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes
(
- Contribution to journal › Scientific review
-
Mark
Water saturation modeling in polymer electrolyte membrane (PEM) fuel cells using a validated approach
2011) 6th International Green Energy Conference (IGEC-VI)(
- Contribution to conference › Paper, not in proceeding
-
Mark
Recovery times after thermal response tests on vertical borehole heat exchangers
2011)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An Analytical Method to Calculate Borehole Fluid Temperatures for Time-scales from Minutes to Decades
(
- Contribution to journal › Article
-
Mark
Characterization and Control of Multi-Cylinder Partially Premixed Combustion
2011)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Comparisons of Pins/Dimples/Protrusions Cooling Concepts for a Turbine Blade Tip-Wall at High Reynolds Numbers
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A General Criterion for Evaporation and Condensation in Micro/Mini Channels
(
- Contribution to journal › Article
-
Mark
Analysis of anisotropic transport in the polymer electrolyte membrane fuel cells and effect on performance
2011) In Journal of Power Sources(
- Contribution to journal › Article
-
Mark
Analysis of multiphase tranport phenomena in PEMFCs by incorporating microscopic model for catalyst layer structure
2011) ASME International Mechanical Engineering Congress and Exposition (IMECE), 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Graphite Foam Heat Exchanger for Vhielces
2011) Vehicle Thermal Management Systems Conference & Exhibition 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Numerical quantification of water saturation, back diffusion, electro-osmotic drag and water generation in polymer electrolyte membrane fuel cells
2011) In Journal of Power Sources(
- Contribution to journal › Article
-
Mark
Parametric Study of Emissions from Low Calorific Value Syngas Combustion, with Variation of Fuel Distribution, in a Prototype Three Sector Burner
2011) ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Four-Step Global Reaction Mechanism for CFD Simulations of Flexi-Fuel Burner for Gas Turbines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
SOFC modeling considering electrochemical reactions at the TPBs
2011) International Conference on Power And Energy Engineering (CPEE2011/CET2011)(
- Contribution to conference › Abstract
-
Mark
Review on Graphite Foam as Thermal Material for Heat Exchangers
2011) World Renewable Energy Congress 2011, WREC 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Performance Analysis and Comparison between Aluminum and Graphite Foam Heat Exchangers under Countercurrent Flow Conditions
2011) 2011 International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control(
- Contribution to conference › Paper, not in proceeding
-
Mark
On Flow Maldistribution in PEMFC Stacks
(
- Contribution to journal › Article
-
Mark
A new predictive tool for saturated critical heat flux in micro/mini-channels: Effect of the heated length-to-diameter ratio
(
- Contribution to journal › Article
-
Mark
A Novel Approach of Retrofitting a Combined Cycle With Post Combustion CO2 Capture
(
- Contribution to journal › Article
- 2010
-
Mark
Development of Multi-scale Models for Transport Processes Involving Catalytic Reactions in SOFCs
(
- Contribution to journal › Article
-
Mark
Computational Analysis of Pin-Fin Arrays Effects on Internal Heat Transfer Enhancement of a Blade Tip Wall
(
- Contribution to journal › Article
-
Mark
Review on Modeling Development for Multiscale Chemical Reactions Coupled Transport Phenomena in Solid Oxide Fuel Cells
(
- Contribution to journal › Scientific review
-
Mark
Prediction of power output of a coal-fired power plant by artificial neural network
(
- Contribution to journal › Article
-
Mark
District heating in case of power failure
(
- Contribution to journal › Article
-
Mark
On numerical simulations of flow and heat transfer of the bend part of a U-duct
2010) 11th International Conference on Advanced Computational Methods & Experimental Measurements in Heat Transfer & Mass Transfer 68. p.167-175(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical predictions of augmented heat transfer of an internal blade tip-wall by hemispherical dimples
(
- Contribution to journal › Article
-
Mark
Gas Turbine Blade Tip Heat Transfer and Cooling: A Literature Survey
(
- Contribution to journal › Article
-
Mark
Turbulent flow in a ribbed channel: Flow structures in the vicinity of a rib
(
- Contribution to journal › Article
-
Mark
Application of artificial neural networks to the condition monitoring and diagnosis of a combined heat and power plant
2010) 21st International Conference on Efficiency, Cost, Optimization , Simulation and Environmental Impact of Energy Systems 35(2). p.1114-1120(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Visualization of diffusion and convection heat transport in a square cavity with natural convection
(
- Contribution to journal › Article
-
Mark
Improved load control for a steam cycle combined heat and power plant
(
- Contribution to journal › Article
-
Mark
Heat Transfer and Pressure Drop Under Dry and Humid Conditions in Flat-Tube Heat Exchangers With Plain Fins
(
- Contribution to journal › Article
-
Mark
Analysis and Modeling of Novel Low-Temperature SOFC With a Co-Ionic Conducting Ceria-Based Composite Electrolyte
(
- Contribution to journal › Article
-
Mark
Simulation of compact heat exchanger performance
2010) 1st International Conference on Computational Methods for Thermal Problems (ThermaComp 2009) 20(5). p.551-569(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A general criterion for evaporative heat transfer in micro/mini-channels
(
- Contribution to journal › Article
-
Mark
An Experimental Study of Heat Transfer and Pressure Drop on the Bend Surface of a U-duct
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Improving Efficiency, Extending the Maximum Load Limit and Characterizing the Control-related Problems Associated with Higher Loads in a 6-Cylinder Heavy-duty Natural gas Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
CFD Modeling Considering Different Kinetic Models for Internal Reforming Reactions in an Anode-Supported SOFC
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Optimal Combined Cycle For Co2 Capture With EGR
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Modeling Of A Solid Oxide Fuel Cell System In Modelica
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Conjugate Heat Transfer Enhancement Of An Internal Blade Pin-Finned Tip-Wall
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Investigation of Laminar Flame Speeds for Medium Calorific Gas with Various Amounts of Hydrogen and Carbon Monoxide Content at Gas Turbine Temperatures
2010) ASME Turbo Expo 2010: Power for Land, Sea, and Air Volume 2: Combustion, Fuels and Emissions, Parts A and B. p.173-181(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study On Catalytic Reactions In Solid Oxide Fuel Cells With Comparison To Gas Phase Reactions In Internal Combustion Engines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An Experimental and numerical study of heat transfer and pressure drop on the bend surface of a U-duct
2010)(
- Thesis › Licentiate thesis
-
Mark
Simulation of Multiphase Transport Phenomena in PEMFC Involving Water Phase Change
2010) 18th World Hydrogen Energy Conference(
- Contribution to conference › Paper, not in proceeding
-
Mark
Analytical modelling of short-term response of ground heat exchangers in ground source heat pump systems
2010)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A theoretical study on the heat transfer process in diesel engines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On Modeling of Heat and Mass Transfer and other Transport Phenomena in Fuel Cells
(
- Contribution to journal › Article
-
Mark
PIV MEASUREMENTS OF TURBULENT FLOW IN A CHANNEL WITH SOLID OR PERFORATED RIBS
2010) Proceedings of 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels(
- Contribution to conference › Paper, not in proceeding
-
Mark
Predictions of Enhanced Heat Transfer of an Internal Blade Tip-Wall with Hemishperical Dimples or Protrusions
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comparative Analysis of Different Renewable Fuels for Potential Utilization in SOFCs
2010) International Green Energy Conference(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes
2010) International Green Energy Conference(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On Reaction Coupled Transport Phenomenon in Reformer Ducts
2010) 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion 35. p.7183-7188(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Vehicle Cooling Systems for Reducing Fuel Consumption and Carbon Dioxide: Literature Survey
2010) SAE 2010 International Powertrains, Fuels & Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Artificial Neural Networks for Gas Turbine Monitoring
2010)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Waste Heat Recovery System for Fuel Cell System
2010) International Green Energy Conference(
- Contribution to conference › Paper, not in proceeding
-
Mark
Model Predictive Control of Partially Premixed Combustion
(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
An advanced internal combustion engine concept for low emissions and high efficiency from idle to max load using gasoline partially premixed combustion
2010) International Powertrains, Fuels and Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of inlet pressure, EGR, combustion phasing, speed and pilot ratio on high load gasoline partially premixed combustion
2010) International Powertrains, Fuels and Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
How hythane with 25% Hydrogen can affect the Combustion in a 6-Cylinder Natural-Gas Engine
(
- Contribution to journal › Article
-
Mark
Effects of ethanol and different type of gasoline fuels on partially premixed combustion from low to high load
2010) SAE 2010 World Congress and Exhibition(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study of a heavy duty Euro5 EGR-engine sensitivity to fuel change with emphasis on combustion and emission formation
2010) SAE 2010 World Congress and Exhibition(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An analysis of saturated critical heat flux in micro/mini-channels
2010) ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2010 Collocated with 3rd Joint US-European Fluids Engineering Summer Meeting p.137-146(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Unburned Hydro Carbon (HC) estimation using a self-tuned heat release method
2010) In SAE Technical Papers(
- Contribution to journal › Article
-
Mark
Mass transfer cavitation model with variable density of nuclei
2010) 7th International Conference on Multiphase Flow(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A general correlation for adiabatic two-phase pressure drop in micro/mini-channels
(
- Contribution to journal › Article
-
Mark
A general correlation for evaporative heat transfer in micro/mini-channels
(
- Contribution to journal › Article
- 2009
-
Mark
Analysis of parameter effects on chemical reaction coupled transport phenomena in SOFC anodes
(
- Contribution to journal › Article
-
Mark
An Experimental Study of Liquid-Phase Heat Transfer in Multiport Minichannel Tubes
(
- Contribution to journal › Article
-
Mark
Analysis Of Heat Transfer And Transport Processes In Sofcs Involving Internal Reforming Reactions
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Estimation of Thermal Networks Using Singular Value Decomposition Method
(
- Contribution to journal › Article
-
Mark
Parametric study and multiple correlations on air-side heat transfer and friction characteristics of fin-and-tube heat exchangers with large number of large-diameter tube rows
(
- Contribution to journal › Article
-
Mark
Numerical simulation of multi-scale transport processes and reactions in pem fuel cells using two-phase models
2009)(
- Thesis › Licentiate thesis
-
Mark
Enhanced Internal Heat Transfer on the Tip-Wall in a Rectangular Two-Pass Channel (AR=1:2) by Pin-Fin Arrays
(
- Contribution to journal › Article
-
Mark
Energy-efficient flat-tube heat exchangers for indirectly cooled display cabinets
(
- Contribution to journal › Article
-
Mark
Numerical Simulation of Unsteady Flows of Physiological Relevance
2009)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Performance predictions of laminar and turbulent heat transfer and fluid flow of heat exchangers having large tube-diameter and large tube-row by artificial neural networks
(
- Contribution to journal › Article
-
Mark
A Novel Approach For Gas Turbine Condition Monitoring Combining Cusum Technique And Artificial Neural Network
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Turbulent flow in a ribbed channel analysed by the proper orhtogonal decomposition
2009) ExHFT-7 7th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics p.1-1(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Low-Calorific Fuel Mix In A Large Size Combined Cycle Plant
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Augmented Heat Transfer Of An Internal Blade Tip Wall With Pin-Fins
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Transport Phenomena Coupled by Chemical Reactions in Methane Reforming Ducts
(
- Contribution to journal › Article
-
Mark
CFD Approach to Analyze Transport Phenomena Coupled Chemical Reactions Relevant for Methane Reformers
(
- Contribution to journal › Article
-
Mark
Analysis of Flame Radiative Heat Transfer Using Large Eddy Simulation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Determination of uncertainty of different CFD codes by means of comparison with experimental fire scenarios
2009)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Comprehensive CFD Simulation of Fire in a Retail Premise with Analysis of Leakage Effect
(
- Contribution to specialist publication or newspaper › Specialist publication article
-
Mark
Topological structures of a separation bubble in a ribbed channel
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
SOFC Modeling Considering Internal Reforming by a Global Kinetics Approach
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Bluff Body Flow - Some Recollections
(
- Contribution to journal › Published meeting abstract
-
Mark
Some Aspects of Gas Turbine Fuel Preparation and Turbomachinery Response to LCV Fuels
2009)(
- Thesis › Doctoral thesis (compilation)
-
Mark
SOFC Modeling Considering Mass and Heat Transfer, Fluid Flow with Internal Reforming Reactions
2009)(
- Thesis › Licentiate thesis
-
Mark
Transient Control of Combustion Phasing and Lambda in a 6-Cylinder Port-Injected Natural-gas Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Identification and analysis of vortical structures in a ribbed channel
2009) ASME 2008 Fluids Engineering Division Summer conference: 4. Symposium on fundamental issues and perspectives in fluid mechanics p.293-301(
- Contribution to conference › Paper, not in proceeding
-
Mark
Pressure Drop in Multi-Parallel Channels of Corrugated Plate Steam Condensers
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Model for Calculation of Heat Transfer in Fin-and-Tube Heat Exchangers
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Development of artificial neural network model for a coal-fired boiler using real plant data
(
- Contribution to journal › Article
-
Mark
Laminar-flow Liquid-to-air Heat Exchangers - Energy-efficient Display Cabinet Applications
2009)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Impact of cofiring biomass with coal in power plants - A techno-economic assessment
(
- Contribution to journal › Article
-
Mark
LTNE approach to simulate temperature of cathode in a PEMFC
2009) 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion(
- Contribution to conference › Paper, not in proceeding
-
Mark
CFD approach analysis of chemical reactions coupled convective heat transfer in reformer ducts
(
- Contribution to conference › Paper, not in proceeding
-
Mark
IMPROVED SUPPLY OF DISTRICT HEAT TO HYDRONIC SPACE HEATING SYSTEMS
2009)(
- Thesis › Doctoral thesis (compilation)
-
Mark
LTNE approach and simulation for anode-supported SOFCs
2009) ASME 2009 Seventh International Fuel Cell Science, Engineering and Technology Conference p.539-549(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Large Eddy Simulation of Strongly Radiating Flame in a Compartment Fire
2009)(
- Contribution to conference › Paper, not in proceeding
-
Mark
On Chemical Reactions Coupled Gas Flows in SOFCs
2009) 2nd Micro and Nano Flows Conference(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effect of Pin Base-Fillet on Heat Transfer Enhancement of an Internal Blade Pin-Finned Tip-Wall
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effects of Different Type of Gasoline Fuels on Heavy Duty Partially Premixed Combustion
2009) SAE 2009 Powertrains Fuels and Lubricants Meeting In SAE International Journal of Engines 2(2). p.71-88(
- Contribution to journal › Article
-
Mark
The Effect of Intake Temperature in a Turbocharged Multi Cylinder Engine Operating in HCCI Mode
(
- Contribution to journal › Article
-
Mark
Using Hythane as a Fuel in a 6-Cylinder Stoichiometric Natural-gas Engine
(
- Contribution to journal › Article
-
Mark
Model based TDC offset estimation from motored cylinder pressure data
2009) 2009 IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling, E-COSM'09 42. p.241-247(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermodynamic modeling and control of a negative valve overlap turbo HCCI engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Control of a turbo charged NVO HCCI engine using a model based approach
2009) 2009 IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling, E-COSM'09 In IFAC Proceedings Volumes 42. p.79-86(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling the intake CO2-level during Load Transients on a 1-cylinder heavy duty di diesel engine
2009) 9th International Conference on Engines and Vehicles, ICE 2009(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evaluation of the operating range of partially premixed combustion in a multi cylinder heavy duty engine with extensive EGR
2009) SAE 2003 World Congress and Exhibition(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Re-sizing of a natural gas fired two-shaft gas turbine for low calorific gas operation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Off-design performance investigation of a low calorific gas fired two-shaft gas turbine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Closed-Loop Combustion Control for a 6-Cylinder Port-Injected Natural-gas Engine
2009) SAE International Powertrains, Fuels and Lubricants Congress In SAE International Journal of Fuels and Lubricants 1(1). p.1232-1241(
- Contribution to journal › Article
- 2008
-
Mark
Evaluation of approaches for modeling temperature wave propagation in district heating pipelines
(
- Contribution to journal › Article
-
Mark
Optimization of Compact Heat Exchangers by a Genetic Algorithm
(
- Contribution to journal › Article
-
Mark
A comparison between the combustion of natural gas and partially reformed natural gas in an atmospheric lean premixed turbine-type combustor
(
- Contribution to journal › Article
-
Mark
Conditions and costs for renewables electricity grid connection: Examples in Europe
(
- Contribution to journal › Article
-
Mark
Effect of aspect ratio on entropy generation in a rectangular cavity with differentially heated vertical walls
(
- Contribution to journal › Article
-
Mark
Steam condensation in parallel channels of plate heat exchangers- an experimental investigation
(
- Contribution to journal › Article
-
Mark
Thermal radiation and effects on transport processes in solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Investigation of radiative heat transfer in fixed bed biomass furnaces
(
- Contribution to journal › Article
-
Mark
Detection and interactive isolation of faults in steam turbines to support maintenance decisions
(
- Contribution to journal › Article
-
Mark
Off-design performance investigation of a low calorific value gas fired generic-type single-shaft gas turbine
(
- Contribution to journal › Article
-
Mark
Application of a genetic algorithm for thermal design of fin-and-tube heat exchangers
(
- Contribution to journal › Article
-
Mark
Application of artificial neural network to the condition monitoring and diagnosis of a CHP plant
2008) ECOS 2008. 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems p.981-988(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On Gas Turbine Diagnostics with Emphasis on Combustion Chambers
2008)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Pecularities of heat transfer from in-line tube bundles to upward aqueous foam flow
2008)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Water condensation and two-phase flow modeling for a plate heat exchanger channel
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Advanced Computational Methods and Experiments in Heat Transfer X
2008)(
- Book/Report › Book
-
Mark
Influence of flow maldistribution on the pressure drop and water condensation in a 100 kw PEM fuel cell stack
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Thermal Engineering Aspects in Power Systems
2008)(
- Book/Report › Book
-
Mark
Transport Phenomena in Fires
2008) In State-of-the-art in Science and Engineering volume 31(
- Book/Report › Book
-
Mark
Numerical simulation of fluid flow in a monolithic exchanger related to high temperature and high pressure operating conditions
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evaluation of weighted sum of grey gases coefficients for combustion gases using predicted emissivities from high resolution spectroscopic databases
2008)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Blind Validation of SIMTEC for CFD Simulation of Building Fires
2008)(
- Book/Report › Report
-
Mark
Investigation on the effects of fly ash particles on the thermal radiation in biomass fired boilers
(
- Contribution to journal › Article
-
Mark
Chemical reacting transport phenomena and multiscale models for SOFCs
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis of chemical reacting heat transfer in SOFCs
2008) 5th European Thermal Sciences Conference(
- Contribution to conference › Paper, not in proceeding
-
Mark
Species and temperature distribution in cathode of PEMFC
2008) 7th International Symposium on Heat Transfer, ISHT7(
- Contribution to conference › Paper, not in proceeding
-
Mark
CFD analysis of two-phase flow and convective heat transfer in PEMFC ducts
2008) 2008 ASME 6th international Fuel Cell Science, Engineering and technology Conference p.103-111(
- Contribution to conference › Paper, not in proceeding
-
Mark
Closed-Loop Combustion Control Using Ion-Current Signals in a 6-Cylinder Port-Injected Natural-gas Engine
2008) SAE International Powertrains, Fuels and Lubricants Congress(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Technical Guide for CompFire
2008)(
- Book/Report › Report
-
Mark
Condition based maintenance of gas turbines using simulation data and artificial neural network: A demonstration of feasibility
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
CFD approach for chemical reaction coupled heat transfer in SOFC channels
2008) 7th International Symposium on Heat Transfer, ISHT7(
- Contribution to conference › Paper, not in proceeding
-
Mark
Artificial neural networks-based correlating heat transfer and friction of three kinds of heat exchnagers having large tube diameter and large tube-row
2008) ASME Heat Transfer Summer Conference, 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Numerical investigation of two-phase aqueous foam flow for heat exchanger applications
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of Different Valve Geometries and Valve Timing Strategies and their Effect on Regenerative Efficiency for a Pneumatic Hybrid with Variable Valve Actuation
(
- Contribution to journal › Article
-
Mark
Investigation of the Combustion Characteristics with Focus on Partially Premixed Combustion in a Heavy Duty Engine
2008) SAE International Powertrains, Fuels & Lubricants Congress In SAE International Journal of Fuels and Lubricants 1(1). p.1063-1074(
- Contribution to journal › Article
-
Mark
HCCI combustion of natural gas and hydrogen enriched natural gas combustion control by early direct injection of diesel oil and RME
2008) 2008 SAE International Powertrains, Fuels and Lubricants Congress(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2007
-
Mark
Simultaneous PIV/PH-PLIF, Rayleigh thermometry/OH-PLIF and stereo PIV measurements in a low-swirl-flame
(
- Contribution to journal › Article