1 – 100 of 145
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Large eddy simulations of turbulent pipe flows at moderate Reynolds numbers
(
- Contribution to journal › Article
-
Mark
Development of a novel solar dryer with an incorporated heat exchanger
(
- Contribution to journal › Article
-
Mark
Pore-scale study of two-phase flow in the gas diffusion layer of proton exchange membrane fuel cells : The impact of polytetrafluoroethylene content and gradient distribution
(
- Contribution to journal › Article
-
Mark
Temperature-dependent Study for Hydrogen Crossover in a Polymer Electrolyte Membrane Used in a PEFC
(
- Contribution to journal › Article
-
Mark
Effect of fiber curvature on gas diffusion layer two-phase dynamics of proton exchange membrane fuel cells
(
- Contribution to journal › Article
-
Mark
Highly stable CuFe1.2Al.8O4 catalyst with low CO selectivity for hydrogen production in HT-PEMFCs application
2024) In International Journal of Applied Ceramic Technology(
- Contribution to journal › Article
-
Mark
The Influence of bipolar plate wettability on performance and durability of a proton exchange membrane fuel cell
2024) In International Journal of Hydrogen Energy(
- Contribution to journal › Article
- 2023
-
Mark
High gas tightness ZrO2-added silicate glass sealant with low thermal stress for solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Numerical Modeling for Rapid Charging of Hydrogen Gas Vessel in Fuel Cell Vehicle
(
- Contribution to journal › Article
-
Mark
Numerical simulation of two-phase flow in gas diffusion layer and gas channel of proton exchange membrane fuel cells
(
- Contribution to journal › Article
-
Mark
Thermodynamic performance in a liquid oxygen tank during active-pressurization under different gas injection temperatures
(
- Contribution to journal › Article
-
Mark
Highlights of Accelerated Degradation Mechanisms for Polymer Electrolyte Fuel Cell
2023) ASME 2023 International Mechanical Engineering Congress and Exposition, IMECE 2023 In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 7: Energy.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Relative humidity impact on the performance and internal resistances of a PEFC working at maximum output power
(
- Contribution to journal › Article
-
Mark
Analysing Tortuosity for Solid Oxide Fuel Cell Anode Material : Experiments and Modeling
(
- Contribution to journal › Article
-
Mark
Numerical Reconstruction of Proton Exchange Membrane Fuel Cell Gas Diffusion Layers
(
- Contribution to conference › Paper, not in proceeding
-
Mark
The Business Model of an Emerging Hydrogen Market in the Swedish Transportation Sector - outlook towards 2050
(
- Contribution to journal › Article
- 2022
-
Mark
Investigation on the pressurized discharge performance from a liquid oxygen tank under different injected gas temperatures
(
- Contribution to journal › Article
-
Mark
Fluid sloshing hydrodynamics in a cryogenic fuel storage tank under different order natural frequencies
(
- Contribution to journal › Article
-
Mark
Congress on Research, Development and Innovation in Renewable Energies : Selected Papers from CIDiER 2021
Espinoza-Andaluz, Mayken LU ; Andersson, Martin LU ; Li, Tingshuai ; Villamar, Jordy Santana ; Dávila, Ángel Encalada and Vargas, Ester Melo (2022) Congress on Research, Development, and Innovation in Renewable Energies, CIDiER 2021 In Green Energy and Technology
- Book/Report › Anthology (editor)
-
Mark
Temperature-Dependent Study for Electrochemical Surface Area on a Catalyst Layer Used in a PEFC
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Impact of the Temperature on the Proton Conductivity and Power Output of a PEFC Operating at High Current Densities
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Y2Mo3O12–Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathode catalyst for proton-conducting solid oxide fuel cells
(
- Contribution to journal › Article
- 2021
-
Mark
Analysis of Thermal Stress in a Solid Oxide Fuel Cell Due to the Sulfur Poisoning Interface of the Electrolyte and Cathode
(
- Contribution to journal › Article
-
Mark
Numerical simulation of solid oxide fuel cells comparing different electrochemical kinetics
(
- Contribution to journal › Article
-
Mark
A multi-input and single-output voltage control for a polymer electrolyte fuel cell system using model predictive control method
(
- Contribution to journal › Article
-
Mark
Polymer-based Cu/Ag composite as seed layer on insulating substrate for copper addition of multi-dimensional conductive patterns
(
- Contribution to journal › Article
-
Mark
Parametric study for electrode microstructure influence on SOFC performance
(
- Contribution to journal › Article
-
Mark
A-Asterisk Algorithm as an Alternative to Evaluate the Geometric Tortuosity in Digitally Created SOFC Anodes
2021) 17th International Symposium on Solid Oxide Fuel Cells, SOFC 2021 In ECS Transactions 103(1). p.1665-1671(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Transport parameter correlations for digitally created PEFC gas diffusion layers by using openPNM
(
- Contribution to journal › Article
-
Mark
Continuum scale modelling and complementary experimentation of solid oxide cells
(
- Contribution to journal › Scientific review
-
Mark
System behavior prediction by artificial neural network algorithm of a methanol steam reformer for polymer electrolyte fuel cell stack use
(
- Contribution to journal › Article
-
Mark
Combined solar and membrane drying technologies for sustainable fruit preservation in low-income countries – prototype development, modelling, and testing
(
- Contribution to journal › Article
- 2020
-
Mark
Dynamic modelling and controlling strategy of polymer electrolyte fuel cells
(
- Contribution to journal › Article
-
Mark
Electrochemical Synthesis of Ammonia Based on a Perovskite LaCrO3 Catalyst
(
- Contribution to journal › Article
-
Mark
Hydrogen and Hydrogen-Rich Fuels : Production and Conversion to Electricity
(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Thermal stress analysis at the interface of cathode and electrolyte in solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Temperature Impact on the Internal Resistance of a Polymer Electrolyte Fuel Cell Considering the Electrochemical Impedance Spectroscopy Diagnosis
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Combined two-phase co-flow and counter-flow in a gas channel/porous transport layer assembly
2020) Pacific Rim Meeting on Electrochemical and Solid State Science 2020, PRiME 200 In ECS Transactions 98(9). p.305-315(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Detailed Analysis of Internal Resistance of a PEFC Comparing High and Low Humidification of the Reactant Gases
(
- Contribution to journal › Article
-
Mark
High-performance solid oxide fuel cells with fiber-based cathodes for low-temperature operation
(
- Contribution to journal › Article
-
Mark
Polymer electrolyte fuel cell modeling - A comparison of two models with different levels of complexity
(
- Contribution to journal › Article
-
Mark
Temperature control strategy for polymer electrolyte fuel cells
(
- Contribution to journal › Article
-
Mark
Electrospun fabrication of nanofibers as high-performance cathodes of solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
In-situ chemical polymerization of Cu-Polythiophenes composite film as seed layer for direct electroplating on insulating substrate
(
- Contribution to journal › Article
- 2019
-
Mark
Modeling of droplet detachment using dynamic contact angles in polymer electrolyte fuel cell gas channels
(
- Contribution to journal › Article
-
Mark
A comparative study between D2Q9 and D2Q5 lattice Boltzmann scheme for mass transport phenomena in porous media
(
- Contribution to journal › Article
-
Mark
Computational simulation data using the Lattice Boltzmann method to generate correlations for gas diffusion layer parameters
(
- Contribution to journal › Article
-
Mark
Performance experimental data of a polymer electrolyte fuel cell considering the variation of the relative humidity of reactants gases
(
- Contribution to journal › Article
-
Mark
Diffusion parameter correlations for PEFC gas diffusion layers considering the presence of a water-droplet
2019) In International Journal of Hydrogen Energy(
- Contribution to journal › Article
-
Mark
Impact of carbon deposition on diffusion parameters in porous anodes of solid oxide fuel cells using the lattice Boltzmann method
2019) 16th International Symposium on Solid Oxide Fuel Cells, SOFC 2019 In ECS Transactions 91(1). p.2023-2030(
- Contribution to journal › Article
-
Mark
Empirical correlations for the performance of a PEFC considering relative humidity of fuel and oxidant gases
2019) In International Journal of Hydrogen Energy(
- Contribution to journal › Article
-
Mark
Progress in the use of electrospun nanofiber electrodes for solid oxide fuel cells : A review
(
- Contribution to journal › Article
-
Mark
Dynamic Contact Angle Modeling of Droplet Reattachment at the Gas Channel Wall in Polymer Electrolyte Fuel Cells
(
- Contribution to journal › Article
-
Mark
Modeling and Control Strategies of Proton Exchange Membrane Fuel Cells
2019) 2018 Renewable Energy Integration with Mini/Microgrid, REM 2018 In Energy Procedia 159. p.54-59(
- Contribution to journal › Article
-
Mark
Impact of water drop presence on diffusion parameters of PEFC gas diffusion layers
2019) 10th International Conference on Applied Energy, ICAE 2018 In Energy Procedia 158. p.1400-1405(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Polymer electrolyte fuel cell system level modelling and simulation of transient behavior
(
- Contribution to journal › Article
-
Mark
Temperature
impact on the internal resistance of a PEFC considering the electrochemical
impedance spectroscopy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2018
-
Mark
Thermal stress analysis of sulfur deactivated solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Mechanism of chromium poisoning the conventional cathode material for solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Interface resolving two-phase flow simulations in gas channels relevant for polymer electrolyte fuel cells using the volume of fluid approach
(
- Contribution to journal › Article
-
Mark
Modeling of solid oxide fuel cells with optimized interconnect designs
(
- Contribution to journal › Article
-
Mark
A suitable width-size of a channel flow for obtaining the velocity profiles by using the Lattice Boltzmann method
2018) 7th International Conference on Mathematical Modeling in Physical Sciences, IC-MSQUARE 2018 In Journal of Physics: Conference Series 1141.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Stability Issues of Fuel Cell Models in the Activation and Concentration Regimes
(
- Contribution to journal › Article
-
Mark
Coupling of lattice boltzmann and volume of fluid approaches to study the droplet behavior at the gas diffusion layer/gas channel interface
2018) Symposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting 86. p.329-336(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Simple and complex polymer electrolyte fuel cell stack models : A comparison
2018) Symposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting 86. p.287-300(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of the electrochemical active site on thermal stress in solid oxide fuel cells
(
- Contribution to journal › Article
-
Mark
Modeling and synchrotron imaging of droplet detachment in gas channels of polymer electrolyte fuel cells
(
- Contribution to journal › Article
-
Mark
Thermal stress analysis of solid oxide fuel cells with chromium poisoning cathodes
(
- Contribution to journal › Article
- 2017
-
Mark
Predicting transport parameters in PEFC gas diffusion layers considering micro-architectural variations using the Lattice Boltzmann method
(
- Contribution to journal › Article
-
Mark
Fabrication of Nickel-YSZ cermet nanofibers via electrospinning
(
- Contribution to journal › Article
-
Mark
Co-fabrication of nickel-YSZ cermet nanofibers via an electrospinning technique
(
- Contribution to journal › Article
-
Mark
Computational time and domain size analysis of porous media flows using the lattice Boltzmann method
(
- Contribution to journal › Article
-
Mark
Modeling of a Gradient Porosity SOFC Anode using the Lattice Boltzmann Method
(
- Contribution to journal › Article
-
Mark
Wavy Surface Cathode Gas Flow Channel Effects on Transport Processes in a Proton Exchange Membrane Fuel Cell
(
- Contribution to journal › Article
-
Mark
Applicability of the lattice Boltzmann method to determine the ohmic resistance in equivalent resistor connections
(
- Contribution to journal › Article
-
Mark
Pore-scale analysis of diffusion transport parameters in digitally reconstructed SOFC anodes with gradient porosity in the main flow direction
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Enhancement of heat transfer in a square channel by roughened surfaces in rib-elements and turbulent flow manipulation
(
- Contribution to journal › Article
-
Mark
Influence of anisotropic gas diffusion layers on transport phenomena in a proton exchange membrane fuel cell
(
- Contribution to journal › Article
-
Mark
Thermal stress analysis of a planar anode-supported solid oxide fuel cell : Effects of anode porosity
(
- Contribution to journal › Article
-
Mark
Comparing through-plane diffusibility correlations in PEFC gas diffusion layers using the lattice Boltzmann method
(
- Contribution to journal › Article
-
Mark
Multiscale multiphase simulations at the gas channel/gas diffusion layer interface inside polymer electrolyte fuel cells
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2016
-
Mark
Modeling of mass and charge transport in a solid oxide fuel cell anode structure by a 3D lattice Boltzmann approach
(
- Contribution to journal › Article
-
Mark
Konferensbevakning European Fuel Cell Technology & Applications Piero Lunghi Conference - EFC15, 16e-18e December, Neapel, Italien
2016)(
- Other contribution › Miscellaneous
-
Mark
Konferensbevakning FCExpo 2016 (International Hydrogen and Fuel Cell Expo 2016) –2/3-4/3, Tokyo, Japan
2016)(
- Other contribution › Miscellaneous
-
Mark
Review on Dimensionless Numbers Relevant for Polymer Electrolyte Fuel Cells
(
- Contribution to journal › Article
-
Mark
Impact on Diffusion Parameters Computation in Gas Diffusion Layers, Considering the Land/Channel Region, Using the Lattice Boltzmann Method
(
- Contribution to journal › Article
-
Mark
Potential of Lattice Boltzmann method to determine the ohmic resistance in porous materials
2016) 5th International Conference on Mathematical Modeling in Physical Sciences In Journal of Physics: Conference Series 738(1).(
- Contribution to journal › Article
-
Mark
Incidence of the particle size over the tortuosity in a porous medium using the lattice Boltzmann method
(
- Contribution to conference › Abstract
-
Mark
Solid Oxide Fuel Cell Interconnect Design Optimization considering the Thermal Stresses
(
- Contribution to journal › Article
-
Mark
Modeling of an anode supported Solid Oxide Fuel Cell focusing on Thermal Stresses
(
- Contribution to journal › Article
-
Mark
A Review of Cell-Scale Multiphase Flow Modelling, including Water Management, in Polymer Electrolyte Fuel Cells
(
- Contribution to journal › Article
-
Mark
Investigation of heat transfer and fluid flow over pocket cavity in the rear part of gas turbine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
Compress effects on porosity, gas-phase tortuosity, and gas permeability in a simulated PEM gas diffusion layer
(
- Contribution to journal › Article
-
Mark
Analysis of Porosity and Tortuosity in a 2D Selected Region of Solid Oxide Fuel Cell Cathode Using the Lattice Boltzmann Method
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling of Solid Oxide Fuel Cell with Anisotropic Conductivity
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Fluid Behavior Through a Simulated PEMFC Gas Diffusion Layer
2015) European Technical School on Hydrogen and Fuel Cells 2015(
- Contribution to conference › Abstract
- 2014
-
Mark
SOFC Cell Design Optimization Using the Finite Element Method Based CFD Approach
(
- Contribution to journal › Article
-
Mark
Comparison of Humidified Hydrogen and Partly Pre-Reformed Natural Gas as Fuel for Solid Oxide Fuel Cells applying Computational Fluid Dynamics
(
- Contribution to journal › Article
-
Mark
Konferensbevakning SAE 2014 New Energy Vehicle Forum, 24e-25e September, Shanghai, Kina
2014)(
- Other contribution › Miscellaneous
-
Mark
Solid Oxide Fuel Cell Material Structure Grading in the Direction Normal to the Electrode/Electrolyte Interface using COMSOL Multiphysics
2014) COMSOL Conference Cambridge 2014(
- Contribution to conference › Abstract