1 – 36 of 36
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=""
width=""
height=""
allowtransparency="true"
frameborder="0">
</iframe>
- 2021
- Impact of discharge port configurations on the performance of sliding vane rotary compressors with a rotating cylinder
- Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder
- 2020
- Numerical study on K/S/Cl release during devolatilization of pulverized biomass at high temperature
- Flotation with sedimentation : Steady states and numerical simulation of transient operation
- 2019
- Biomass steam gasification in bubbling fluidized bed for higher-H 2 syngas : CFD simulation with coarse grain model
- Numerical simulation of ignition mode and ignition delay time of pulverized biomass particles
- Analysis of laminar flow and heat transfer in an interrupted microchannel heat sink with different shaped ribs
- 2018
- Effects of the swirling coolant jet from the upstream slot on the vane endwall cooling and the vane suction side phantom cooling
- Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs
-
Comment on: “Corrections to the Mathematical Formulation of a Backwards Lagrangian Particle Dispersion Model” by Gibson and Sailor (2012: Boundary-Layer Meteorology 145, 399 - 406)
Stöckl, Stefan ; Rotach, Mathias W. and Kljun, Natascha LU
(2018)
In Boundary-Layer Meteorology
166(1).
p.153-160
Mark
- Effects of the cooling configurations layout near the first-stage vane leading edge on the endwall cooling and phantom cooling of the vane suction side surface
- Thermal performance of angled, V-shaped and leaning-V-shaped ribs in a rotating rectangular channel with 45° orientation
- 2017
- Effects of the mainstream turbulence intensity and slot injection angle on the endwall cooling and phantom cooling of the vane suction side surface
-
An extended vertex and crystal plasticity framework for efficient multiscale modeling of polycrystalline materials
Mellbin, Ylva LU ; Hallberg, Håkan LU
and Ristinmaa, Matti
LU
(2017)
In International Journal of Solids and Structures
125.
p.150-160
Mark
- 2016
- Efficient simulations of tubulin-driven axonal growth
- Heat transfer and flame stabilization of laminar premixed flames anchored to a heat-flux burner
- Heat transfer and friction factor in a dimple-pin fin wedge duct with various dimple depth and converging angle
- 2015
-
A combined crystal plasticity and graph-based vertex model of dynamic recrystallization at large deformations
Mellbin, Ylva LU ; Hallberg, Håkan LU
and Ristinmaa, Matti
LU
(2015)
In Modelling and Simulation in Materials Science and Engineering
23(4).
Mark
- Prediction and Measurement of the local extinction coefficient in sprays for 3D simulation/experiment data comparison
-
Numerical evaluation of different landfill daily cover in semiarid areas – Jordan
Aljaradin, Mohammad LU
and Persson, Kenneth M
LU
(2015)
In International Journal of Environment and Waste Management
16(2).
p.95-112
Mark
- 2014
- Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow
- Heat Transfer Enhancement of a Gas Turbine Blade-Tip Wall
- Model separability indices for efficient dynamic simulation
- 2013
- Quantitative numerical analysis of flow past a circular cylinder at Reynolds number between 50 and 200
- 2012
- Analysis of Flow and Thermal Performance of a Water-Cooled Transversal Wavy Microchannel Heat Sink for Chip Cooling
- 2011
- Effect of bi-layer interconnector design on mass transfer performance in porous anode of solid oxide fuel cells
- Comparisons of Pins/Dimples/Protrusions Cooling Concepts for a Turbine Blade Tip-Wall at High Reynolds Numbers
- 2010
- Power mapping with dynamical adjustment for improved portfolio optimization
- 2008
- Soil heterogeneity effects on acid flushing of lead-contaminated soil
- Modelling of growth stress generation and timber distortions related to log sawing and forced drying.
- 2006
- Implementation and evaluation of a binary mixture model and three-dimensional FE-analysis of water saturated soil
- 2005
- Simulation of dynamic instabilities during high rate deformation of ductile bars and plates
- 2003
- Computational Analysis of Gas Flow and Heat Transport Phenomena in Ducts Relevant for Fuel Cells
- 2001
- Numerical Simulation of Fire Exposed Facades - An intitial investigation
- 2000
- Adhesive Joints in Timber Engineering. Modelling and Testing of Fracture Properties
- Dynamic neck formation in elastic-plastic tensile bars