1 – 100 of 148
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Semi-global Chemical Kinetic Mechanism for FAME Combustion Modeling
(
- Contribution to journal › Article
-
Mark
Numerical Modeling of Chemical Kinetics, Spray Dynamics, and Turbulent Combustion towards Sustainable Aviation
(
- Contribution to journal › Article
-
Mark
A comparative study on methanol and n-dodecane spray flames using Large-Eddy Simulation
(
- Contribution to journal › Article
- 2023
-
Mark
Chemistry diagnostics for monitoring
2023) p.417-501(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
A compact Scheimpflug lidar imaging instrument for industrial diagnostics of flames
(
- Contribution to journal › Article
-
Mark
Evaluation of combustion properties of vent gases from Li-ion batteries
(
- Contribution to journal › Article
-
Mark
CFD Simulation of Biomass Combustion in an Industrial Circulating Fluidized Bed Furnace
(
- Contribution to journal › Article
-
Mark
A Review of Isobutanol as a Fuel for Internal Combustion Engines
(
- Contribution to journal › Scientific review
- 2022
-
Mark
Sensitivity-Enhanced Raman Spectroscopy and High-Speed Fluorescence for In Situ Gas-Phase Diagnostics
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Arbitrary position 3D tomography for practical application in combustion diagnostics
(
- Contribution to journal › Article
-
Mark
Numerical modelling of biomass thermochemical conversion and potassium release
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Long-gap ignition using femtosecond laser filament-triggered discharge
(
- Contribution to journal › Article
-
Mark
Volcanic temperature changes modulated volatile release and climate fluctuations at the end-Triassic mass extinction
(
- Contribution to journal › Article
- 2021
-
Mark
Numerical study on K/S/Cl release during devolatilization of pulverized biomass at high temperature
(
- Contribution to journal › Article
-
Mark
Laser-based diagnostics for investigating soot formation in combustion processes
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Ultraviolet Absorption Cross-Sections of Ammonia at Elevated Temperatures for Nonintrusive Quantitative Detection in Combustion Environments
(
- Contribution to journal › Article
-
Mark
Potassium release from biomass particles during combustion—real-time in situ tdlas detection and numerical simulation
(
- Contribution to journal › Article
-
Mark
Optical and laser diagnostics : The versatility of Imaging
2021) In Lund Reports on Combustion Physics(
- Thesis › Doctoral thesis (compilation)
- 2020
-
Mark
Shedding light on the governing mechanisms for insufficient CO and H2 burnout in the presence of potassium, chlorine and sulfur
(
- Contribution to journal › Article
-
Mark
Quantitative imaging of potassium release from single burning pulverized biomass char particles
(
- Contribution to journal › Article
- 2019
-
Mark
Analysis of extinction and sustained ignition
(
- Contribution to journal › Article
-
Mark
Methanol as a fuel for internal combustion engines
(
- Contribution to journal › Scientific review
-
Mark
Characteristics of a Gliding Arc Discharge Under the Influence of a Laminar Premixed Flame
(
- Contribution to journal › Article
-
Mark
Numerical simulation of ignition mode and ignition delay time of pulverized biomass particles
(
- Contribution to journal › Article
- 2018
-
Mark
Laser-Based Investigations of Combustion Phenomena in Gas Turbine Related Burners
2018)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Stratification and Combustion in the Transition from HCCI to PPC
2018)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Gas phase combustion in the vicinity of a biomass particle during devolatilization – Model development and experimental verification
(
- Contribution to journal › Article
- 2017
-
Mark
Effect of Volatile Reactions on the Thermochemical Conversion of Biomass Particles
(
- Contribution to journal › Article
-
Mark
Direct numerical simulations of a high Karlovitz number laboratory premixed jet flame - An analysis of flame stretch and flame thickening
(
- Contribution to journal › Article
-
Mark
Combustion characteristics of some alternative fuels in ICE: : a detailed numerical study
2017)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Simultaneous Control of Soot Emissions and Pressure Rise Rate in Gasoline PPC Engine
2017) p.572-577(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental investigations of potassium chemistry in premixed flames
(
- Contribution to journal › Article
-
Mark
Laser-Induced Photofragmentation Fluorescence Imaging of Alkali Compounds in Flames
(
- Contribution to journal › Article
-
Mark
Analysis of slab heating characteristics in a reheating furnace
(
- Contribution to journal › Article
-
Mark
Strategy for improved NH2 detection in combustion environments using an Alexandrite laser
(
- Contribution to journal › Article
-
Mark
Study of ignition and extinction of small-scale fires in experiments with an emulating gas burner
(
- Contribution to journal › Article
-
Mark
Large Eddy Simulation of a premixed bluff body stabilized flame using global and skeletal reaction mechanisms
(
- Contribution to journal › Article
-
Mark
Post-Detonation Afterburning of High Explosives
2017)(
- Thesis › Doctoral thesis (compilation)
- 2016
-
Mark
A review of design considerations for light-duty diesel combustion systems
(
- Contribution to journal › Article
-
Mark
The hybrid RANS/LES of partially premixed supersonic combustion using G/Z flamelet model
(
- Contribution to journal › Article
-
Mark
Combustion of selected alternative liquid fuels at oxy-fuel conditions: experiments and modelling
2016)(
- Thesis › Doctoral thesis (compilation)
- 2015
-
Mark
Effect of pore size on the gasification of biomass char
2015) Clean, Efficient and Affordable Energy for a Sustainable Future: The 7th International Conference on Applied Energy (ICAE2015) 75. p.779-785(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Release characteristic of different classes of sodium during combustion of Zhun-Dong coal investigated by laser-induced breakdown spectroscopy
(
- Contribution to journal › Article
-
Mark
Investigation of Hydrogen Enriched Natural Gas Flames in a SGT-700/800 Burner Using OH PLIF and Chemiluminescence Imaging
(
- Contribution to journal › Article
-
Mark
Modelling and Experimental Investigations on Thermal Radiation in Combustion Environments
2015)(
- Thesis › Doctoral thesis (compilation)
- 2014
-
Mark
X-Ray Diagnostics in Combustion - Study of Particle Formation in Flames Using Combined Small- and Wide-Angle X-Ray Scattering
(
- Thesis › Doctoral thesis (compilation)
-
Mark
Influence of reactive species on the lean blowout limit of an industrial DLE gas turbine burner
(
- Contribution to journal › Article
-
Mark
Three-dimensional direct numerical simulation study of conditioned moments associated with front propagation in turbulent flows
(
- Contribution to journal › Article
-
Mark
Numerical Simulation of Combustion and Gasification of Biomass Particles
2014)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Laser-induced phosphorescence spectroscopy: development and application of thermographic phosphors (TP) for thermometry in combustion environments
(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Application of Laser-based Diagnostics to a Prototype Gas Turbine Burner at Selected Pressures
2014)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Mixing state and mass mobility relationship of aerosol from small scale biomass combustion
(
- Contribution to conference › Abstract
- 2013
-
Mark
Investigation of a prototype industrial gas turbine combustor using alternative gaseous fuels
2013)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Experimental and Reactor Network Study of Nitrogen Dilution Effects on NOx Formation for Natural Gas and Syngas at Elevated Pressures
2013) ASME Turbo Expo 2013: Turbine Technical Conference and Exposition Volume 1A: Combustion, Fuels and Emissions.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of a Premixed Gas Turbine Combustor Central Body Burner Using OH Planar Laser Induced Fluorescence at Elevated Pressures
2013) ASME Turbo Expo 2013: Turbine Technical Conference and Exposition Volume 1A: Combustion, Fuels and Emissions.(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2012
-
Mark
Dynamic Mapping of Diesel Engine through System identification
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Investigations of an Industrial Lean Premixed Gas Turbine Combustor With High Swirling Flow
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Application of Laser Techniques in Combustion Environments of Relevance for Gas Turbine Studies
2012)(
- Thesis › Doctoral thesis (compilation)
-
Mark
High Repetition Rate Laser Diagnostics for Combustion Applications
2012)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Development and Application of Laser-Induced Emission Techniques for Combustion Diagnostics -High-Resolution Visualization of Turbulent Reacting Flows
2012)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Development and Application of Non-linear Mid-infrared Laser Spectroscopy for Combustion Diagnostics
(
- Thesis › Doctoral thesis (monograph)
-
Mark
Spray Processes in Optical Diesel Engines - Air-Entrainement and Emissions
2012)(
- Thesis › Doctoral thesis (compilation)
- 2011
-
Mark
Future Engine Control Enabling Environment Friendly Vehicle
2011) SAE World Congress & Exhibition, 2013(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
CFD Investigation of Swirl-stabilized Flexi-fuel Burner Using Methane-air Mixture for Gas Turbines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Investigations of Lean Stability Limits of a Prototype Syngas Burner for Low Calorific Value Gases
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Four-Step Global Reaction Mechanism for CFD Simulations of Flexi-Fuel Burner for Gas Turbines
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Parametric Study of Emissions from Low Calorific Value Syngas Combustion, with Variation of Fuel Distribution, in a Prototype Three Sector Burner
2011) ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Processes in Optical Diesel Engines - Emissions Formation and Heat Release
2011)(
- Thesis › Doctoral thesis (compilation)
- 2010
-
Mark
Experimental Investigation of Laminar Flame Speeds for Medium Calorific Gas with Various Amounts of Hydrogen and Carbon Monoxide Content at Gas Turbine Temperatures
2010) ASME Turbo Expo 2010: Power for Land, Sea, and Air Volume 2: Combustion, Fuels and Emissions, Parts A and B. p.173-181(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Turbocharging to extend HCCI Operating Range in a Multi Cylinder Engine- Benefits and Limitations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
HCCI Heat Release Data for Combustion Simulation, based on Results from a Turbocharged Multi Cylinder Engine
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Turbocharged HCCI Engine, Improving Efficiency and Operating Range
2010)(
- Thesis › Doctoral thesis (compilation)
- 2009
-
Mark
Ultra-high-speed pumping of an optical parametric oscillator (OPO) for high-speed laser-induced fluorescence measurements
(
- Contribution to journal › Article
- 2008
-
Mark
Numerical and experimental investigation of backdraft
(
- Contribution to journal › Article
-
Mark
A comparison between the combustion of natural gas and partially reformed natural gas in an atmospheric lean premixed turbine-type combustor
(
- Contribution to journal › Article
-
Mark
Using oxygen-quenched pressure-sensitive paint for oxygen concentration measurements in low-temperature combustion environments
(
- Contribution to journal › Article
-
Mark
Stochastic Reactor Models for Engine Simulations
2008)(
- Thesis › Doctoral thesis (monograph)
- 2007
-
Mark
The effect of swirl on spark assisted compression ignition (SACI)
2007) JSAE/SAE Internation Fuels and Lubricants Meeting(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of the Early Flame Development in Spark Assisted HCCI Combustion Using High Speed Chemiluminescence Imaging
2007) SAE World Congress, 2007(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Overview of the biofuel project
2007) In CECOST annual seminar(
- Contribution to journal › Published meeting abstract
-
Mark
Influence of the compression ratio on the performance and emissions of a mini HCCI engine fuelled with diethyl ether
2007) SAE Powertrain & Fluid Systems Conference and Exhibition, 2007(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Laser Spectroscopic Techniques for Combustion Diagnostics Directed Towards Industrial Applications
2007)(
- Thesis › Doctoral thesis (compilation)
-
Mark
A comprehensive and compact n-heptane oxidation model derived using chemical lumping
(
- Contribution to journal › Article
-
Mark
On the Use of Laser-Induced Incandescence for Soot Diagnostics: From Theoretical Aspects to Applications in Engines
2007)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Laser Diagnostic Techniques with Ultra-High Repetition Rate for Studies in Combustion Environments
2007)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Fine Particle Emissions from Solid Biofuel Combustion Studied With Single Particle Mass Spectrometry - Identification of markers for Organics, Soot and Ash Components
2007) Nordic Society for Aerosol Research (NOSA) Annual Symposia, 2007(
- Contribution to conference › Abstract
- 2006
-
Mark
Automatic generation of a detailed mechanism for the oxidation of n-decane
(
- Contribution to journal › Article
- 2005
-
Mark
Quantification of the Formaldehyde Emissions from Different HCCI Engines Running on a Range of Fuels
(
- Contribution to journal › Article
-
Mark
Hygroscopic Properties of Aerosols from Open-Air Burning and Controlled Combustion of Biomass
2005)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Investigation of Boundary Layer Behaviour in HCCI Combustion using Chemiluminescence Imaging
(
- Contribution to journal › Article
-
Mark
High-Speed LIF Imaging for Cycle-Resolved Formaldehyde Visualization in HCCI Combustion
(
- Contribution to journal › Article
-
Mark
Thermometry Using Laser-Induced Emission from Thermographic Phosphors: Development and Applications in Combustion
2005)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Particle emissions from district heating units operating on three commonly used biofuels
(
- Contribution to journal › Article
-
Mark
Transient Control of a Multi Cylinder HCCI Engine During a Drive Cycle
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling of Pulverised Wood Flames
2005) In Division of Fluid Mechanics, Department of Heat and Power Engineering, Lund Institute of Technology, Lund University 05/1029.(
- Thesis › Doctoral thesis (monograph)
-
Mark
Optical Diagnostics of Laser-Induced and Spark Plug-Assisted Hcci Combustion
(
- Contribution to journal › Article
- 2004
-
Mark
BlueBellMouse. A Tool for Kinetic Model Development
2004)(
- Thesis › Doctoral thesis (monograph)
-
Mark
Development and Application of Rotational Coherent Anti-Stokes Raman Spectroscopy and Laser-induced Fluorescence for Combustion Diagnostics
2004)(
- Thesis › Doctoral thesis (compilation)
-
Mark
On-Line Charracterisation of Indoor Combustion Sources - Chamber Studies of Particle Volatility and Hygroscopicity
(
- Contribution to journal › Published meeting abstract
-
Mark
Boosting for High Load HCCI
(
- Contribution to journal › Article