Machine Elements
1 – 66 of 66
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Tribology and airborne particle emissions from grey cast iron and WC reinforced laser cladded brake discs
(
- Contribution to journal › Article
- 2023
-
Mark
A novel approach for brake emission estimation based on traffic microsimulation, vehicle system dynamics, and machine learning modeling
(
- Contribution to journal › Article
-
Mark
Modelling and Simulation of Gearset Behavior : Effects of Manufacturing Errors and Electrification
2023)(
- Thesis › Doctoral thesis (compilation)
- 2022
-
Mark
Simulation of thermal and mechanical performance of laser cladded disc brake rotors
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(1). p.3-14(
- Contribution to journal › Article
-
Mark
Optimum dog-leg angle for mass and bearing force optimization of multistage gear reduction
2022) In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 236(13). p.2795-2805(
- Contribution to journal › Scientific review
-
Mark
An Experimental Study of Forced Vibration Influence on Disc Brake Drag Torque in Heavy Commercial Road Vehicles
(
- Contribution to journal › Article
-
Mark
Reducing scrapping of gears by assessment of tip contact threshold torque
2022) In Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236(8). p.1613-1622(
- Contribution to journal › Article
- 2021
-
Mark
Laser Cladding Treatment for Refurbishing Disc Brake Rotors : Environmental and Tribological Analysis
(
- Contribution to journal › Article
-
Mark
A finite element analysis (FEA) approach to simulate the coefficient of friction of a brake system starting from material friction characterization
(
- Contribution to journal › Article
-
Mark
Gear tolerancing for simultaneous optimization of transmission error and contact pressure
(
- Contribution to journal › Article
-
Mark
Influence of manufacturing error tolerances on contact pressure in gears
2021) In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235(20). p.5173-5185(
- Contribution to journal › Article
-
Mark
Input parameters for airborne brake wear emission simulations : A comprehensive review
(
- Contribution to journal › Article
- 2020
-
Mark
A study of the effect of brake pad scorching on tribology and airborne particle emissions
(
- Contribution to journal › Article
-
Mark
Airborne wear particle emissions produced during the dyno bench tests with a slag containing semi-metallic brake pads
(
- Contribution to journal › Article
-
Mark
Recycling of worn out brake pads ‒ impact on tribology and environment
(
- Contribution to journal › Article
-
Mark
Special issue editorial : Study of brake wear particle emissions
(
- Contribution to journal › Debate/Note/Editorial
- 2018
-
Mark
Prediction of the cutting forces in gear hobbing and the wear behaviour of the individual hob cutting teeth
(
- Contribution to journal › Article
-
Mark
A method for calculating contact pressure and tip contact in spur gear sets with manufacturing errors
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2016
-
Mark
On the Machining of Involute Helical Gears - Prediction models on tool geometry, cut gear tooth surface topography, chip geometry, and tool cutting forces
2016)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Prediction and experimental verification of the cutting forces in gear form milling
(
- Contribution to journal › Article
-
Mark
The Undercut Criterion of Pinion Shaper Cutters: And an Improvement by Modifying the Basic Rack Profile
(
- Contribution to journal › Article
-
Mark
Dynamic Isotropy in 6-DOF Kinematically Constrained Platforms by Three Elastic Nodal Joints
(
- Contribution to journal › Article
-
Mark
Coordinate representations for rigid parts in multibody dynamics
(
- Contribution to journal › Article
- 2015
-
Mark
Influence of strut inertia on the vibrations in initially symmetric Gough-Stewart Platforms-an analytical study
(
- Contribution to journal › Article
-
Mark
Gear Tooth Surface Roughness of Helical Gears Manufactured by a Form Milling Cutter
2015)(
- Other contribution › Miscellaneous
-
Mark
Minimizing refining steps for gears
2015)(
- Other contribution › Miscellaneous
- 2014
-
Mark
Prediction of alignment deviations on a lead crowned helical gear manufactured by a hob
(
- Contribution to journal › Article
-
Mark
Gear Tooth Surface Roughness of Helical Gears Manufactured by a Form Milling Cutter
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob
2014)(
- Other contribution › Miscellaneous
- 2013
-
Mark
The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2012
-
Mark
Alignment Deviations on a Lead Crowned Helical Gear Manufactured by a Hob
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tooth Deviations of an Involute Helical Gear Manufactured in a Simulated Hobbing Process with Introduced Errors
2012) 1st International Conference on Virtual Machining Process Technology(
- Contribution to conference › Paper, not in proceeding
- 2010
-
Mark
A Parametric Analysis of the Gear Surface Roughness After Hobbing
(
- Contribution to journal › Article
- 2009
-
Mark
A parametric Analysis of the Undeformed Chip Geometry in Gear Hobbing
(
- Contribution to journal › Scientific review
- 2008
-
Mark
Tribologi
2008)(
- Book/Report › Book
- 2007
-
Mark
Transmissioner
2007)(
- Book/Report › Book
- 2006
-
Mark
Quantifying diffused hydrogen in AISI-52100 bearing steel and in silver steel under tribo-mechanical action: Pure rotating bending, sliding-rotating bending, rolling-rotating bending and uni-axial tensile loading
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
High pressure chamber measurements - Discussion
2006) In Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology 220(J3). p.336-336(
- Contribution to journal › Debate/Note/Editorial
-
Mark
Water contamination effects of the lubricant on the hydrogen absorbing tendency of deep groove ball bearings
2006) In Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology 220(J3). p.337-337(
- Contribution to journal › Debate/Note/Editorial
-
Mark
High-pressure chamber measurements
2006) In Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology 220(J3). p.199-206(
- Contribution to journal › Article
-
Mark
Diesel Engnine Cam and Roller Follower Tribology
2006)(
- Thesis › Doctoral thesis (compilation)
- 2005
-
Mark
High pressure lubricant property measurements
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of water contamination on the diffused content of hydrogen under stress in AISI-52100 bearing steel
2005)(
- Thesis › Doctoral thesis (compilation)
- 2004
-
Mark
Analysis of brake assembly with floating disc
2004) In Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science 218(9). p.1021-1032(
- Contribution to journal › Article
-
Mark
On Contact Mechanisms and Mechanical Transmission Performance
2004)(
- Thesis › Doctoral thesis (compilation)
- 2003
-
Mark
The Stribeck memorial lecture
(
- Contribution to journal › Article
-
Mark
A lubricant model considering wall-slip in EHL line contacts
(
- Contribution to journal › Article
-
Mark
Compressibility of lubricants at high pressures
(
- Contribution to journal › Article
-
Mark
A non-Newtonian model based on limiting shear stress and slip planes - parametric studies
(
- Contribution to journal › Article
-
Mark
A method to determine dynamic loads on spur gear teeth and on bearings
(
- Contribution to journal › Article
-
Mark
A dynamic model to determine vibrations in involute helical gears
(
- Contribution to journal › Article
-
Mark
A model of the dynamic behavior of spur gears with consideration of off-line-of-action contacts
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2002
-
Mark
Nano-meter film rheology and asperity lubrication
(
- Contribution to journal › Article
-
Mark
On the experimental validation of a non-linear shaft damping model
2002) In Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science 216(10). p.1031-1035(
- Contribution to journal › Article
-
Mark
Narrow journal bearings
2002) In Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology 216(J5). p.343-346(
- Contribution to journal › Article
-
Mark
An analytical method to determine the influence of shape deviation on load distribution and mesh stiffness for spur gears
2002) In Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science 216(10). p.1005-1016(
- Contribution to journal › Article
-
Mark
Mechanical Analysis of Lubrication and Lubricants
2002)(
- Thesis › Doctoral thesis (monograph)
-
Mark
Analyses of Spur and Helical Gears
2002)(
- Thesis › Doctoral thesis (compilation)
- 2001
-
Mark
A dynamic analysis of the oscillations in a chain drive
(
- Contribution to journal › Article
-
Mark
A method to determine the dynamic load distribution in a chain drive
2001) In Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science 215(5). p.569-579(
- Contribution to journal › Article
- 1999
-
Mark
A method to determine the static load distribution in a chain drive
(
- Contribution to journal › Article
-
Mark
On the Load Distribution and Design of a Chain Drive
1999)(
- Thesis › Doctoral thesis (compilation)
- 1998
-
Mark
A general approach for determining dynamic forces in spur gears
(
- Contribution to journal › Article
- 1994
-
Mark
On the mass optimization design of external involute spur gears
1994)(
- Book/Report › Report
- 1993
-
Mark
On the optimum design of sectorial step thrust bearings
1993)(
- Book/Report › Report
- 1981
-
Mark
On the design of external involute gears
1981)(
- Book/Report › Report