Production and Materials Engineering
1 – 100 of 550
- show: 100
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2025
-
Mark
Unveiling nano-scale chemical inhomogeneity in surface oxide films formed on V- and N-containing martensite stainless steel by synchrotron X-ray photoelectron emission spectroscopy/microscopy and microscopic X-ray absorption spectroscopy
(
- Contribution to journal › Article
- 2024
-
Mark
Effect of ageing on machining performance of grey cast iron and its compensation by cutting speed management
2024) In CIRP Annals(
- Contribution to journal › Article
-
Mark
A Methodology Using Monte-Carlo Simulation on Nanoindentation Deconvolution for Metal Classification
2024) 11th Swedish Production Symposium In Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning 52. p.613-627(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Relationship Between Tool Temperature Distribution and Stagnation Point Behavior for Different Process Factors in Machining Operations
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.69-89(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Concept from Sensor to Sustainability in Machining - An Interdisciplinary Approach over a Wide TRL Range
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.148-170(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Strategies for Effective Chip Management in Machining of Ductile Cast Iron
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.50-61(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Wear mechanisms in Ti(C,N)-Al2O3 coated carbide during sustainable machining CGI
(
- Contribution to journal › Article
-
Mark
Spatially resolved structural and chemical properties of the white layer in machined Inconel 718 super alloy
(
- Contribution to journal › Article
-
Mark
In situ imaging of precipitate formation in additively manufactured al-alloys by scanning X-ray fluorescence
(
- Contribution to journal › Article
-
Mark
Enhanced steel machining performance using texture-controlled CVD alpha-alumina coatings : Fundamental degradation mechanisms
(
- Contribution to journal › Article
-
Mark
Wear Mechanisms in Cutting Tools for Machining Applications : Interfacial Phenomena, Characterization, and Relation to Performance
2024)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Mechanical integrity of PVD TiAlN-coated PcBN : Influence of substrate bias voltage and microstructural assemblage
(
- Contribution to journal › Article
-
Mark
Strain and phase evolution in TiAlN coatings during high-speed metal cutting : An in operando high-energy x-ray diffraction study
(
- Contribution to journal › Article
-
Mark
On the wear mechanisms of uncoated and coated carbide tools in milling titanium alloys
(
- Contribution to journal › Article
-
Mark
Machinability improvement by in-operando Tool Protection Layers through designed steel alloying : The case of manganese steel
(
- Contribution to journal › Article
-
Mark
The Role of Microfibers and Liquid Aluminum in the Reaction between Boron Nitride and Tantalum Nitride
(
- Contribution to journal › Article
-
Mark
Rapid acquisition of digital fingerprints of Ti-6Al-4V macrotexture from machining force measurement data
(
- Contribution to journal › Article
-
Mark
The effect of workpiece grain size on surface integrity in orthogonal cutting of Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evolution of surface quality in micromilling Ti-6Al-4V alloy with increasing machined length
(
- Chapter in Book/Report/Conference proceeding › Preface to conference proceeding
-
Mark
On the surface integrity of machined aero-engine grade Ni-based superalloy billets produced by the field-assisted sintering technology (FAST) route
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On wear of TiAlN coated tools with and without NbN overlayer in machining titanium alloys
(
- Contribution to journal › Article
-
Mark
Machining SiC fibre reinforced metal matrix composites – How do different matrix materials affect the cutting performance?
2024) In CIRP Annals(
- Contribution to journal › Article
-
Mark
Machining of Compacted Graphite Iron : A review
(
- Contribution to journal › Scientific review
-
Mark
Effect of cooling scheme and coating of drills on hole quality in drilling of Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2023
-
Mark
Degradation of multi-layer CVD-coated cemented carbide in finish milling compacted graphite iron
(
- Contribution to journal › Article
-
Mark
Adhesive wear of TiAlN coatings during low speed turning of stainless steel 316L
(
- Contribution to journal › Article
-
Mark
Machining performance and wear behaviour of polycrystalline diamond and coated carbide tools during milling of titanium alloy Ti-54M
(
- Contribution to journal › Article
-
Mark
Insights in α-Al2O3 degradation in multilayer CVD coated carbide tools when turning IN718
(
- Contribution to journal › Article
-
Mark
A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants
(
- Contribution to journal › Article
-
Mark
Research solution for automatic hole quality analysis when drilling fiber-reinforced composites
(
- Contribution to journal › Article
-
Mark
An experimental and theoretical investigation on Ti-5553/WC–Co(6%) chemical interactions during machining and in diffusion couples
(
- Contribution to journal › Article
-
Mark
Visualising microstructural dynamics of titanium aluminium nitride coatings under variable-temperature oxidation
(
- Contribution to journal › Article
-
Mark
Predicting wear mechanisms of ultra-hard tooling in machining Ti6Al4V by diffusion couples and simulation
(
- Contribution to journal › Article
-
Mark
Creep of un-doped and Cr-doped WC-Co at high temperature and high load
(
- Contribution to journal › Article
-
Mark
Digital twins for cutting processes
(
- Contribution to journal › Article
-
Mark
On chemical interactions between an inclusion engineered stainless steel (316L) and (Ti,Al)N coated tools during turning
(
- Contribution to journal › Article
-
Mark
Development of a functional hardness gradient in WC-TiC-Co cemented carbide during gradient sintering
(
- Contribution to journal › Article
-
Mark
Predicting tool life for side milling in C45 E using Colding and Taylor tool life models
(
- Contribution to journal › Article
-
Mark
High-Temperature Oxidation of Titanium Aluminium Nitride Coatings Visualized by Environmental Transmission Electron Microscopy
2023) European Materials Research Society 2023 Spring Meeting(
- Contribution to conference › Abstract
-
Mark
Perspectives on supervising and conducting interdisciplinary research projects
2023) Proceedings of LTH:s 12:e Pedagogiska Inspirationskonferens In Proceedings LTH:s Pedagogiska inspirationskonferens(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791407(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791391(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17789417(
- Patent › Patent
-
Mark
Large-scale metal strip for power storage and energy conversion applications by machining-based deformation processing
(
- Contribution to journal › Article
- 2022
-
Mark
Numerical investigation of sequential cuts residual stress considering tool edge radius in machining of AISI 304 stainless steel
(
- Contribution to journal › Article
-
Mark
On the function of lead (Pb) in machining brass alloys
2022) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
-
Mark
Towards Sustainable Manufacturing of Brass Components : Charaterisation, Machinability and Solid-State Recycling of Lead-Free Brass
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Investigation on Resource-Efficient Aluminium Recycling – A State of the Art Review
2022) 10th Swedish Production Symposium (SPS2022) In Advances in Transdisciplinary Engineering 21. p.15-27(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Performance and wear mechanisms of different PcBN tools when machining superalloy AD730
(
- Contribution to journal › Article
-
Mark
Multicomponent binders for PcBN performance enhancement in cutting tool applications
(
- Contribution to journal › Article
-
Mark
A resistor network model for analysis of current and temperature distribution in carbon fibre reinforced polymers during induction heating
(
- Contribution to journal › Article
-
Mark
Cost Model for remanufacturing
2022) 10th Swedish Production Symposium (SPS2022) In Advances in Transdisciplinary Engineering 21. p.267-278(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Induction heating of carbon fibre reinforced polymer composites : Characterization and modelling
2022)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Additive Manufacturing Decision Support Systems : A Systematic Literature Review Discerning Current and Future Directions
2022) 10th Swedish Production Symposium, SPS 2022 In Advances in Transdisciplinary Engineering 21. p.553-565(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability study on dry machining of white cast iron by polycrystalline cubic boron nitride inserts
(
- Contribution to journal › Article
-
Mark
Sustainability with a Cost Perspective – Driving the Industry to Embrace Sustainable Thinking
(
- Contribution to journal › Article
-
Mark
Insights into plastic deformation and binder lamella orientation in hardmetal turning inserts
(
- Contribution to journal › Article
-
Mark
Production Costs Calculation Model in Crushing and Screening : Using a technical-economic approach tool for finding the optimal production costs when comparing technical and economical solutions
2022)(
- Thesis › Doctoral thesis (monograph)
-
Mark
Influence of sub-surface deformation induced by machining on stress corrosion cracking in lead-free brass
(
- Contribution to journal › Article
-
Mark
Formation of Ti2Cu in Ti-Cu Alloys
(
- Contribution to journal › Article
-
Mark
Molecular dynamics-based characterisation of early oxide in Fe/Cr alloys
(
- Contribution to journal › Article
-
Mark
Understanding wear and interaction between CVD α-Al2O3 coated tools, steel, and non-metallic inclusions in machining
(
- Contribution to journal › Article
-
Mark
Indoor temperature increase at reduced cooling power in light and heavy buildings - measurements in 9 buildings and Monte Carlo simulations of parameters
2022) 17th International Conference on Indoor Air Quality and Climate, INDOOR AIR 2022(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the influence of varying the crystallographic texture of alumina CVD coatings on cutting performance in steel turning
(
- Contribution to journal › Article
-
Mark
Machine Learning based Approach for the Prediction of Surface Integrity in Machining
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Numerical investigations on residual stresses in orthogonal cutting of Ti-6A1-4V
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The influence of machining induced surface integrity and residual stress on the fatigue performance of Ti-6Al-4V following polycrystalline diamond and coated cemented carbide milling
(
- Contribution to journal › Article
- 2021
-
Mark
Evaluation of tool wear mechanisms and tool performance in machining single-phase tungsten
(
- Contribution to journal › Article
-
Mark
Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
A comprehensive study on cutting mechanisms and surface integrity of AISI 304 when turning a curved surface
(
- Contribution to journal › Article
-
Mark
Improvement of tool utilization when hard turning with cBN tools at varying process parameters
(
- Contribution to journal › Article
-
Mark
Onset of the degradation of CVD α-Al2O3 coating during turning of Ca-treated steels
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining
(
- Contribution to journal › Article
-
Mark
Novel metric “Implenarity” for characterization of shape and defectiveness : The case of CFRP hole quality
(
- Contribution to journal › Article
-
Mark
Cryogenic and hybrid induction-assisted machining strategies as alternatives for conventional machining of refractory tungsten and niobium
(
- Contribution to journal › Article
-
Mark
Surface chemistry and diffusion of trace and alloying elements during in vacuum thermal deoxidation of stainless steel
2021) In Surface and Interface Analysis(
- Contribution to journal › Article
-
Mark
Numerical investigation on the formation mechanism of residual stress in metal cutting
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
An analytical method for continuously predicting mechanics and residual stress in fillet surface turning
(
- Contribution to journal › Article
-
Mark
Wear mechanisms of PcBN tools when machining AISI 316L
(
- Contribution to journal › Article
-
Mark
FE analysis on the association between tool edge radius and thermal-mechanical load in machining Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analyzing the Environmental Consequences of Production Processes from a System of Systems Perspective : A Case of Gear Manufacturing in the Automotive Industry
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental study and modeling of the heat flux acting on the tool flank when machining
2021) 18th CIRP Conference on Modeling of Machining Operations, CMMO 2021 In Procedia CIRP 102. p.97-102(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of the influence of tool rake angles on machining of inconel 718
(
- Contribution to journal › Article
-
Mark
The role of microstructural characteristics of additively manufactured Alloy 718 on tool wear in machining
(
- Contribution to journal › Article
-
Mark
Evolution of magnetic properties during tempering
2021) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
-
Mark
Coherently strained and dislocation-free architectured AlGaN/GaN submicron-sized structures
(
- Contribution to journal › Article
-
Mark
ACN-Sim : An Open-Source Simulator for Data-Driven Electric Vehicle Charging Research
(
- Contribution to journal › Article
-
Mark
Influence of manufacturing error tolerances on contact pressure in gears
2021) In Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235(20). p.5173-5185(
- Contribution to journal › Article
-
Mark
Historical building renovation and PV optimisation towards NetZEB in Sweden
(
- Contribution to journal › Article
-
Mark
Analysis of the temperature distribution in weave-based CFRP during induction heating using a simplified numerical model with a cross-ply representation
(
- Contribution to journal › Article
-
Mark
Thermodynamic modeling framework for prediction of tool wear and tool protection phenomena in machining
(
- Contribution to journal › Article
-
Mark
Contrast - a lightweight Python framework for beamline orchestration and data acquisition
(
- Contribution to journal › Article
-
Mark
Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations
(
- Contribution to journal › Article
-
Mark
Mobilities of Ti and Fe in disordered TiFe-BCC assessed from new experimental data
(
- Contribution to journal › Article
-
Mark
On the steady-state workpiece flow mechanism and force prediction considering piled-up effect and dead metal zone formation
(
- Contribution to journal › Article
-
Mark
Machinability of Single-phase Materials : Surface integrity and tool wear analysis
2021)(
- Thesis › Doctoral thesis (compilation)
-
Mark
Characterisation of worn WC tool using STEM-EDS aided by principal component analysis
(
- Contribution to journal › Article
-
Mark
Numerical modelling of CFRP induction heating using temperature-dependent material properties
(
- Contribution to journal › Article
-
Mark
Tool wear mechanisms of PcBN in machining Inconel 718 : Analysis across multiple length scale
(
- Contribution to journal › Article
-
Mark
Fracture Energy Measurement of Prismatic Plane and Σ2 Boundary in Cemented Carbide
(
- Contribution to journal › Article