1 – 250 of 280
- show: 250
- |
- sort: year (new to old)
Close
Embed this list
<iframe src=" "
width=" "
height=" "
allowtransparency="true"
frameborder="0">
</iframe>
- 2024
-
Mark
Effect of ageing on machining performance of grey cast iron and its compensation by cutting speed management
2024) In CIRP Annals(
- Contribution to journal › Article
-
Mark
Key Performance Index for Creating an Integrated and Sustainable Academy - A University with the Ability to Meet Future Needs and Challenges Identified in Society and Industry
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.643-659(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Concept from Sensor to Sustainability in Machining - An Interdisciplinary Approach over a Wide TRL Range
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.148-170(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Strategies for Effective Chip Management in Machining of Ductile Cast Iron
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.50-61(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Wear mechanisms in Ti(C,N)-Al2O3 coated carbide during sustainable machining CGI
(
- Contribution to journal › Article
-
Mark
A Methodology Using Monte-Carlo Simulation on Nanoindentation Deconvolution for Metal Classification
2024) 11th Swedish Production Symposium In Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning 52. p.613-627(
- Chapter in Book/Report/Conference proceeding › Book chapter
-
Mark
Machining of Compacted Graphite Iron : A review
(
- Contribution to journal › Scientific review
-
Mark
Relationship Between Tool Temperature Distribution and Stagnation Point Behavior for Different Process Factors in Machining Operations
2024) 11th Swedish Production Symposium, SPS2024 In Advances in Transdisciplinary Engineering 52. p.69-89(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2023
-
Mark
Predicting wear mechanisms of ultra-hard tooling in machining Ti6Al4V by diffusion couples and simulation
(
- Contribution to journal › Article
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791407(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17791391(
- Patent › Patent
-
Mark
Polycrystalline cubic boron nitride material
2023) 17789417(
- Patent › Patent
-
Mark
Degradation of multi-layer CVD-coated cemented carbide in finish milling compacted graphite iron
(
- Contribution to journal › Article
- 2022
-
Mark
On the function of lead (Pb) in machining brass alloys
2022) In International Journal of Advanced Manufacturing Technology(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of different PcBN tools when machining superalloy AD730
(
- Contribution to journal › Article
-
Mark
Multicomponent binders for PcBN performance enhancement in cutting tool applications
(
- Contribution to journal › Article
-
Mark
Additive Manufacturing Decision Support Systems : A Systematic Literature Review Discerning Current and Future Directions
2022) 10th Swedish Production Symposium, SPS 2022 In Advances in Transdisciplinary Engineering 21. p.553-565(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2021
-
Mark
FE analysis on the association between tool edge radius and thermal-mechanical load in machining Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Novel metric “Implenarity” for characterization of shape and defectiveness : The case of CFRP hole quality
(
- Contribution to journal › Article
-
Mark
Evaluation of tool wear mechanisms and tool performance in machining single-phase tungsten
(
- Contribution to journal › Article
-
Mark
Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
Tool wear mechanisms of PcBN in machining Inconel 718 : Analysis across multiple length scale
(
- Contribution to journal › Article
-
Mark
Onset of the degradation of CVD α-Al2O3 coating during turning of Ca-treated steels
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining
(
- Contribution to journal › Article
-
Mark
Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations
(
- Contribution to journal › Article
-
Mark
Wear mechanisms of PcBN tools when machining AISI 316L
(
- Contribution to journal › Article
- 2020
-
Mark
Study of wear mechanisms of cemented carbide tools during machining of single-phase niobium
(
- Contribution to journal › Article
-
Mark
Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications
(
- Contribution to journal › Article
-
Mark
Sintering of Superhard cBN-Based Materials with Ti4WC5
(
- Contribution to journal › Article
-
Mark
Evolution of the Microstructure and Mechanical Properties of cBN-Based Cutting Tools with Silicides Compounds as Binder Phase
2020) 9th Swedish Production Symposium, SPS 2020 In Advances in Transdisciplinary Engineering 13. p.428-438(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance and wear mechanisms of PCD and pcBN cutting tools during machining titanium alloy Ti6Al4V
(
- Contribution to journal › Article
-
Mark
Sintering of BN Based Composites with ZrC and Al under High Temperatures and Pressures
(
- Contribution to journal › Article
-
Mark
Machinability evaluation of low-lead brass alloys
2020) 29th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2019 In Procedia Manufacturing 38. p.1723-1730(
- Contribution to journal › Article
-
Mark
Sintering of cBN Based Materials with a TaC Binder for Cutting Tool Application
(
- Contribution to journal › Article
-
Mark
Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718
(
- Contribution to journal › Article
-
Mark
A machine learning based approach for determining the stress-strain relation of grey cast iron from nanoindentation
(
- Contribution to journal › Article
-
Mark
CBN-based cutting tools with niobium compounds as a binder phase
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2019
-
Mark
On chemical and diffusional interactions between PCBN and superalloy Inconel 718 : Imitational experiments
(
- Contribution to journal › Article
-
Mark
Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries
(
- Contribution to journal › Article
-
Mark
Small scale testing of PCD and WC-Co tooling in rock cutting using longitudinal turning
(
- Contribution to journal › Article
-
Mark
Load effect on scratch micro-mechanisms of solution strengthened Compacted Graphite Irons
(
- Contribution to journal › Article
-
Mark
Experimental analysis of cutting edge effects on vibrations in end milling
(
- Contribution to journal › Article
-
Mark
The influence of sintering temperature on phase composition and mechanical properties of сbn-based composites with addition of vanadium compounds
(
- Contribution to journal › Article
-
Mark
Assessment of Metal Cutting Tools using Cost Performance Ratio and Tool Life Analyses
2019) 9th International Conference on Flexible Automation and Intelligent Manufacturing ( FAIM 2019) In Procedia Manufacturing 38. p.816-823(
- Contribution to journal › Article
-
Mark
Tool–chip thermal conductance coefficient and heat flux in machining : Theory, model and experiment
(
- Contribution to journal › Article
-
Mark
Determining process parameters for successful material reclamation of lead-free brass chips using hot forging operations: Lubrication
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Multi-objective testing of different brass alloy components for DFM
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Quantitative analysis of chip segmentation in machining using an automated image processing method
2019) 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO In Procedia CIRP 82. p.314-319(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2018
-
Mark
Development of a simulation model to study tool loads in pcBN when machining AISI 316L
(
- Contribution to journal › Article
-
Mark
Assessment on abrasiveness of high chromium cast iron material on the wear performance of PCBN cutting tools in dry machining
(
- Contribution to journal › Article
-
Mark
Analysis of the minimum chip thickness during turning of duplex stainless steel
2018) In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233(7). p.1733-1744(
- Contribution to journal › Article
-
Mark
Surface Characterization of AD730TM Part Produced in High Speed Turning with CBN tool
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
FE simulation and experimental verification of side-flow and burr formation in machining of oxygen-free copper
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Selecting Cutting Data Tests for Cutting Data Modeling Using the Colding Tool Life Model
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Investigation of the mechanical properties and cutting performance of cBN-based cutting tools with Cr3C2 binder phase.
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling tool life in high speed machining of AD730
(
- Contribution to journal › Article
-
Mark
Cost-based pricing for learning organizations – a model presentation and demonstration
(
- Contribution to journal › Article
-
Mark
Heat flux in metal cutting : Experiment, model, and comparative analysis
(
- Contribution to journal › Article
-
Mark
Hole-quality evaluation in drilling fiber-reinforced composites
(
- Contribution to journal › Article
-
Mark
Особливості формування структури та фазового складу в процесі реакційного спікання кубічного нітриду бору зі сполуками Ti, Cr, V
(
- Contribution to journal › Article
-
Mark
Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Wear Mechanisms of pcBN tooling during High-Speed Machining of Gray Cast Iron
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of oxygen on the tool wear in machining
(
- Contribution to journal › Article
-
Mark
Equivalent Chip Thickness and its Influence on Tool Life
(
- Contribution to journal › Article
-
Mark
An inverse problem for retrieving time dependency of heat flux in metal cutting via linear programming
(
- Contribution to journal › Article
-
Mark
Superhard pcBN materials with chromium compounds as a binder
(
- Contribution to journal › Article
-
Mark
The mystery of missing feed force — The effect of friction models, flank wear and ploughing on feed force in metal cutting simulations
(
- Contribution to journal › Article
-
Mark
Surface roughness and sub-surface deformation measurements in machining of niobium
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability and manufacturing cost in low-lead brass
(
- Contribution to journal › Article
-
Mark
Experimental investigations into tool wear of drilling CFRP
(
- Contribution to journal › Article
-
Mark
The correct way of splitting tools - Optimization of instrument design for measuring contact stress distribution
(
- Contribution to journal › Article
-
Mark
Metallmatriskompositer i masstillverkade komponenter och produkter : - MMC 2016-2018
2018)(
- Book/Report › Report
-
Mark
Minimum quantity lubrication (MQL) with carbon nanostructured additives in sheet metal forming
(
- Contribution to journal › Article
-
Mark
Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718
(
- Contribution to journal › Article
-
Mark
Application of Colding tool life equation on the drilling fiber reinforcement polymers
(
- Contribution to journal › Article
-
Mark
CPR a general Cost Performance Ratio in Manufacturing - A KPI for judgement of different technologies and development scenarios
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2017
-
Mark
The influence of tool micro-geometry on stress distribution in turning operations of AISI 4140 by FE analysis
(
- Contribution to journal › Article
-
Mark
Modeling subsurface deformation induced by machining of Inconel 718
(
- Contribution to journal › Article
-
Mark
Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools
(
- Contribution to journal › Article
-
Mark
Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder : Structure, properties, application
(
- Contribution to journal › Article
-
Mark
Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
(
- Contribution to journal › Article
-
Mark
Too Sharp for its Own Good – Tool Edge Deformation Mechanisms in the Initial Stages of Metal Cutting
(
- Contribution to journal › Article
-
Mark
An integrated cost model for metal cutting operations based on engagement time and a cost breakdown approach
(
- Contribution to journal › Article
-
Mark
Nano-Scratching resistance of high-chromium white cast iron and its correlation with wear of cBN tool in machining
(
- Contribution to journal › Article
-
Mark
Wear mechanisms of uncoated and coated cemented carbide tools in machining lead-free silicon brass
(
- Contribution to journal › Article
-
Mark
Influence of radial depth of cut on entry conditions and dynamics in face milling application
(
- Contribution to journal › Article
-
Mark
Hot Forging Operations of Brass Chips for Material Reclamation after Machining Operations
(
- Contribution to journal › Article
-
Mark
Assessment of Commonly used Tool Life Models in Metal Cutting
(
- Contribution to journal › Article
-
Mark
Sensitivity of Colding tool life equation on the dimensions of experimental dataset
(
- Contribution to journal › Article
-
Mark
Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
(
- Contribution to journal › Article
-
Mark
Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite
(
- Contribution to journal › Article
-
Mark
Quantitative study of roughness effect in nanoindentation on AISI316L based on simulation and experiment
2017) In Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science 231(21). p.4067-4075(
- Contribution to journal › Article
-
Mark
Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel
(
- Contribution to journal › Article
-
Mark
Comparative study on the machinability of lead-free brass
(
- Contribution to journal › Article
-
Mark
Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.122-127(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental and Numerical Investigation of Burr Formation in Intermittent Turning of AISI 4140
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.37-42(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modeling of Force Build-up Process and Optimization of Tool Geometry when Intermittent Turning
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.393-398(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The Influence the Uncut Chip Thickness has on the Stagnation Point in Orthogonal Cutting
2017) 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) In Procedia CIRP 58. p.13-18(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2016
-
Mark
Ultrahard boron nitride material through a hybrid laser/waterjet based surface treatment
(
- Contribution to journal › Article
-
Mark
Modeling the cost of varying surface finish demands during longitudinal turning operations
(
- Contribution to journal › Article
-
Mark
The industrial way to make product cost calculations in crushing & screening
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Requirements and potential for high performance cutting tools based on superhard phases in new applications
2016) Extended Abstract for keynote lecture at(
De Beers Diamond Conference 2016 hosted by Warwick University, UK p.1-3- Contribution to conference › Paper, not in proceeding
-
Mark
Machinability analysis of ISO-grouped workpiece material : -With focus on cutting force modelling
2016) 7th International Swedish Production Symposium(
- Contribution to conference › Paper, not in proceeding
-
Mark
Quantification of the Tolerance Cost as Part of the Product Realization Process
2016) 7th International Swedish Production Symposium(
- Contribution to conference › Paper, not in proceeding
-
Mark
Comparative Study on the Machinability and Manufacturing Cost in Low-Lead Brass
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Residual stress analysis of machined lead-free and lead-containing brasses
(
- Contribution to journal › Article
-
Mark
Machinability of CuZn21Si3P brass
(
- Contribution to journal › Article
-
Mark
Effect of feed on sub-surface deformation and yield strength of oxygen-free pitch copper in machining
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of Cutting Edge Geometry on Force Build-up Process in Intermittent Turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Wear and Vibrations Generated When Turning High-chromium White Cast Iron with pCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2015
-
Mark
Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using SEM and Nanoindentation
(
- Contribution to journal › Article
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 2: Variation of Tool Geometry along the Edge Line
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analysis of In Situ Mechanical Properties of Phases in High-Alloyed White Iron Measured by Grid Nanoindentation
(
- Contribution to journal › Article
-
Mark
On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters under Variation of Side and Back Rake Angle
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influences of micro mechanical property and microstructure on performance of machining high chromium white cast iron with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Performance assessment of pCBN and bCBN tools in machining of high-chromium white cast iron
(
- Contribution to journal › Article
-
Mark
HP-HT sintering, microstructure, and properties of B6O- and TiC-containing composites based on cBN
(
- Contribution to journal › Article
- 2014
-
Mark
Modeling and experimentation on multistage work-hardening mechanism in machining with nose-radiused tools and its influence on machined subsurface quality and tool wear
(
- Contribution to journal › Article
-
Mark
Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of the minimum chip thickness on the obtained surface roughness during turning operations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel
(
- Contribution to journal › Article
-
Mark
Numerical and experimental study of the roughness effects on mechanical properties of AISI316L by nanoindentation
2014) In Modeling and Numerical Simulation of Material Science(
- Contribution to journal › Article
-
Mark
Identification of plasticity constants from orthogonal cutting and inverse analysis
(
- Contribution to journal › Article
-
Mark
Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Life and Wear Modelling in Metal Cutting, Part 2 ─ Based on Combining the Archard and the Colding Equations
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Self-generated vibrations and process stability when turning high chromium white cast iron with PCBN tools
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Nano graphite flakes as lubricant additive
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cost Analysis for Crushing and Screening: Development of a Methodology for Determination of Production Cost for Product Fractions
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool Life and Wear Model in Metal Cutting, Part 1 - Influence of Varying Flank Wear Criterion on Colding's Tool Life Equation
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability of Lead-Free Brass – A comparative study
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Production Cost Case Generation by a Recursive Monte-Carlo Method in Electrical Machine Production
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability and process stability when turning Alloy 718 with standard and produced by selective laser sintering toolholders
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Statistical interfaces for production of a permanent magnet based rotor
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of the Workpiece Material Properties on the Cutting Forces
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tolerance Cost in Relation to Surface Finish during Longitudinal Turning Operations
2014) Swedish Production Symposium, 2014(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
EFFECTS OF COOLING RATE AND SILICON CONTENT ON AL/SICp MMC
2014) Swedish Production Symposium, 2014(
- Contribution to conference › Paper, not in proceeding
-
Mark
Influence of cutting speed and tool wear on vibrations and process stability when turning Inconel 718 with PCBN tools
(
- Contribution to journal › Article
-
Mark
Residual stresses in high speed turning of nickel-based superalloy
(
- Contribution to specialist publication or newspaper › Specialist publication article
-
Mark
Manufacturing costs as a decisionsupport in production developoment and relocation issues - a case study at a supplier to the automotive industry
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Batch size optimization based on production part cost
2014) p.1031-1038(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Nyhetsbrev ProMatEn 2014-5
2014)(
- Other contribution › Miscellaneous
-
Mark
Grinding or shaving - economic decision support in the production of gears
(
- Contribution to conference › Paper, not in proceeding
-
Mark
Monte Carlo Simulations of Production Costs in Discrete Part Manufacturing
2014) Swedish Production Symposium, 2014(
- Contribution to conference › Paper, not in proceeding
-
Mark
Characterizing the mechanical properties of skin-core structure in polymer molding process by nanoindentation
2014) Swedish Production Symposium, 2014(
- Contribution to conference › Paper, not in proceeding
- 2013
-
Mark
Performance and wear mechanisms of whisker-reinforced alumina, coated and uncoated PCBN tools when high-speed turning aged Inconel 718
(
- Contribution to journal › Article
-
Mark
A method for identification of geometrical tool changes during machining of titanium alloy Ti6Al4V
(
- Contribution to journal › Article
-
Mark
Conditions for and development of an information technology-support tool for manufacturing cost calculations and analyses
(
- Contribution to journal › Article
-
Mark
Modeling effect of surface roughness on nanoindentation tests
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Wear mechanisms of silicon carbide-whisker-reinforced alumina (Al2O3-SiCw) cutting tools when high-speed machining aged Alloy 718
(
- Contribution to journal › Article
-
Mark
Sustainable machining through increasing the cutting tool utilization
(
- Contribution to journal › Article
-
Mark
The influence of microstructure and mechanical properties on the machinability of martensitic and bainitic prehardened mould steels
(
- Contribution to journal › Article
-
Mark
Effects of Cutting Speed when Turning Age Hardened Inconel 718 with PCBN Tools of Binderless and Low-CBN Grades
(
- Contribution to journal › Article
-
Mark
Dynamic Stability of the Process of Turning Nickel Superalloys Using a Toolholder Produced by Selective Laser Sintering
(
- Contribution to journal › Article
-
Mark
The influence of tool steel microstructure on friction in sheet metal forming
(
- Contribution to journal › Article
-
Mark
Influence of the tool surface micro topography on the tribological characteristics in metal cutting - Part II Theoretical calculations of contact conditions
(
- Contribution to journal › Article
-
Mark
General Conception of Polar Diagrams for the Evaluation of the Potential Machinability of Workpiece Materials
(
- Contribution to journal › Article
-
Mark
Influence of the tool surface micro topography on the tribological characteristics in metal cutting – Part I Experimental observations of contact conditions
(
- Contribution to journal › Article
-
Mark
A step towards sustainable machining through increasing the cutting tool utilization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A modular framework for evaluation of electrical machine production costs
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The link between plasticity parameters and process parameters in orthogonal cutting
2013) 14th CIRP Conference on Modeling of Machining Operations, CIRP CMMO 2013 In Procedia CIRP 8. p.224-229(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Extreme Hardness Achievements in Binderless Cubic Boron Nitride Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Influence of Dry Cut and Tool Wear on Residual Stresses in High Speed Machining of Nickel-Based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tool wear and tool life of conventional pcBN, binderless cBN and wBN-cBN tool materials in continuous finish hard turning of cold work tool steel
2013) 16-th International Conference Rock- and materials-processing tools: engineering, technology and application(
- Contribution to conference › Paper, not in proceeding
-
Mark
Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718
2013) The 13th International Conference on Fracture (ICF13)(
- Contribution to conference › Paper, not in proceeding
- 2012
-
Mark
Analytical Calculation of the True Equivalent Chip Thickness for Cutting Tools and its Influence on the Calculated Tool Life
(
- Contribution to journal › Article
-
Mark
Methodology for evaluating effects of material characteristics on machinability-theory and statistics-based modelling applied on Alloy 718
(
- Contribution to journal › Article
-
Mark
Cost Based Process Optimization by Incrementally Changing the Cutting Data during Sustainable Machining
(
- Contribution to journal › Article
-
Mark
Comprehensive dynamic analysis of vibration and stability when ultrahigh speed turning Inconel 718 with cBN tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
(
- Contribution to journal › Article
-
Mark
Dynamic manufacturing costs — Describing the dynamic behavior of downtimes from a cost perspective
(
- Contribution to journal › Article
-
Mark
Characterization of mechanical properties of machined surface by nanoindentation — Part 1: Simulation of indenter geometry effects
2012) Swedish Production Symposium, 2012(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
The affect of Johnson Cook plasticity parameters on the cutting process parameters
2012) Swedish Production Symposium, 2012(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cost drivers and production limitations for electrified vehicle traction components
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A Sustainable Approach for Milling of Duplex Stainless Steel by Increasing the Cutting Tool Utilization
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analytical Calculation of the Ra Surface Roughness during Turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
(
- Contribution to journal › Article
-
Mark
The scale of permanent magnet materials for automotive traction motors
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A production performance analysis regarding downtime and downtime pattern
2012) 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
NEXT STEP in Cost-based Sustainable Production Development - Cases from different Production Operations
2012) International Conference on Advances in Manufacturing and Materials Engineering(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling Subsurface Deformation in High Speed Machining of Inconel 718
2012) 1st CIRP International Conference on Virtual Machining Process Technology(
- Contribution to conference › Paper, not in proceeding
-
Mark
Manufacturing costs and Degree of Occupancy Based on the Principle of Characteristic Parts
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools
2012) Swedish Production Symposium, 2012(
- Contribution to conference › Paper, not in proceeding
-
Mark
Identification of Subsurface Deformation in Machining of Inconel 718
2012) International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2011) In Applied Mechanics and Materials 117-119. p.1681-1688(
- Contribution to journal › Article
-
Mark
Improved Tribotesting for Sheet Metal Forming
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A cost model for determining an optimal automation level in discrete batch manufacturing
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2011
-
Mark
A fully coupled thermomechanical two-dimensional simulation model for orthogonal cutting: formulation and simulation
2011) In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225(B10). p.1735-1745(
- Contribution to journal › Article
-
Mark
Characterization of White Layer Generated when Turning Aged Inconel 718
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Relations between Volume Flexibility and Part Cost in Assembly Lines
2011) 20th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) 27. p.669-673(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Improved tool wear properties in sheet metal forming using Carbide steel, a novel abrasion resistant cast material
(
- Contribution to journal › Article
-
Mark
Experimental studies of cutting force variation in face milling
(
- Contribution to journal › Article
-
Mark
Evaluating the Machinability of Inconel 718 Using Polar Diagrams
(
- Contribution to journal › Article
-
Mark
A numerical and experimental investigation of the deformation zones and the corresponding cutting forces in orthogonal cutting
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Experimental Study of the Minimum Chip Thickness during the Machining of Duplex Stainless Steel
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Cost Optimization by Incremental Production Improvements of Metal Cutting Operations
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability of duplex stainless steels - A study with focus on the tool wear behaviour
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
A new concept of coil design for industrial induction heating
2011) Swedish Production Symposium 2011(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Dynamic Manufacturing Costs - Describing the Dynamic Behavior of Downtimes from a Cost Perspective
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 1: Chip area parameters under both side and back rake angles variation
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Process induced subsurface deformation of Alloy 718 in relation to different cutting conditions
(
- Contribution to conference › Paper, not in proceeding
-
Mark
On the surface quality of Alloy 718 in finishing turning with CBN cutting tools
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
The development of NEXT STEP beyond Lean Production - The link between technology and economics with focus on sustainable developments
2011) 2011 International Conference on Applied Mechanics, Materials and Manufacturing(
- Contribution to conference › Paper, not in proceeding
-
Mark
Development of a Novel Superfinishing Apparatus for Controlled Texturing of Functional Surfaces
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Study on work-hardening phenomena in machining aged Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling tool life in the machining of strain-hardening material - Alloy 718
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 2: Variation of tool angles along the edge line
2011) Swedish Production Symposium 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
A fully coupled thermo-mechanical simulation model for orthogonal cutting-formulation and validation
2011) In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225(10). p.1735-1745(
- Contribution to journal › Article
-
Mark
Modeling of maintenance costs
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Contribution to conference › Paper, not in proceeding
-
Mark
Industrial heating using energy efficient induction technology
2011) 44th CIRP Conference on Manufacturing Systems, 2011(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Analytical and Experimental Determination of the Ra Surface Roughness during Turning
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
- 2010
-
Mark
Improving waviness of bore in precision hard turning by pressurized coolant
(
- Contribution to journal › Article
-
Mark
Indication of cracking during pressing of advanced thin plates using an AE-based monitoring system
2010) Tools and Technologies for the processing of ultra high strength steels: IDDRG 2010 International Conference p.925-934(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Evaluating the machinability of Inconel 718 using polar diagrams
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Machinability prediction of workpiece material with a diagraph method
2010) 2009 International Conference on Manufacturing Science and Engineering, ICMSE 2009 In Advanced Materials Research 97-101. p.2072-2075(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
FE analyses of orthogonal cutting
(
- Contribution to conference › Paper, not in proceeding
- 2009
-
Mark
A parametric Analysis of the Undeformed Chip Geometry in Gear Hobbing
(
- Contribution to journal › Scientific review
-
Mark
Identification of plastic deformation and progressive wear of cutting tools
2009) The international 3rd Swedish production symposium (SPS'09)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
New advances in soft magnetic materials - properties of moulded flux conductors in inductors and electrical motors
2009) Inductica Technical Conference(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modeling of the stagnation zone in the metal cutting process
2009) Svenska Produktions Symposiet, SPS-09(
- Contribution to conference › Abstract
- 2008
-
Mark
A general economic model for manufacturing cost simulation
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Implementation of an economic model to simulate manufacturing costs
(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Modelling of metal cutting tool wear based on Archard’s wear equation
2008)(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
Tribological analysis of the machinability of compacted graphite iron
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Software realization of the TESSPA method-criteria description and software performance analysis
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modeling the cooling effect in compressed air assisted machining
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Greencut - an attempt to introduce an environmentally sustainable system for complex cutting tools
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
An analythical geometry study of gear hobbing
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling ot metal cutting tool wear based on Archards wear equation
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Experimental studies of cutting force variation in face milling
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
-
Mark
Tribological analysis in comparison of dry and air assisted maching
2008) Swedish Production Symposium 2008(
- Contribution to conference › Paper, not in proceeding
- 2007
-
Mark
Flex-rail: a semi industrial test tool for various applications such as: Springback analysis
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Analytic modelling of contact stresses around the honed edge in metal cutting - based on cutting force measurements
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Manufacturing economic simulation of a flexible manufacturing cell
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Polar machinability diagrams - a model to predict the machinability of a work material
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
A Basic Economic Model for Judging Production Development
2007) Swedish Production Symposium 2007(
- Chapter in Book/Report/Conference proceeding › Paper in conference proceeding
-
Mark
True equivalent chip thickness for tools with a nose radius
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Modelling of the composite temperature 8c in metal cutting tools
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Coldings tool life model applied on tool wear when machining the Maxthal material
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
-
Mark
Hard milling of abrasion resistance cast iron with pcbn cutting tool
2007) Swedish Production Symposium 2007(
- Contribution to conference › Paper, not in proceeding
- 2004
-
Mark
Machining characteristics of novel-abrasion resistant iron
(
- Contribution to journal › Article
-
Mark
Identification of cutting errors in precision hard turning process
(
- Contribution to journal › Article
- 2003
-
Mark
Effect of chamfer angle on wear of PCBN cutting tool
(
- Contribution to journal › Article
-
Mark
The monitoring of flank wear on the CBN tool in the hard turning process
(
- Contribution to journal › Article
- 2002
-
Mark
Zinc-alloys as tool materials in short-run sheet-metal forming processes - Experimental analysis of three different zinc-alloys
(
- Contribution to journal › Article
- 2000
-
Mark
Bandsawing. Part I: cutting force model including effects of positional errors, tool dynamics and wear
(
- Contribution to journal › Article
-
Mark
Bandsawing. Part II: detecting positional errors, tool dynamics and wear by cutting force measurement
(
- Contribution to journal › Article
- 1998
-
Mark
Monitoring of friction processes by the means of acoustic emission measurements—deep drawing of sheet metal
(
- Contribution to journal › Article